Ethanol physical properties

N. Kosaric, et al., Ulmann s encyclopedia of industrial chemistry (Wiley-VCH Verlag GmbH Weinheim, 2000 electronic release), chap. Ethanol-physical properties, 6th edn. 

Physical properties. All colourless. Formaldehyde, HCHO, is a gas, and only its aqueous solution, which has a characteristic pungent odour, is considered metaformaldehyde or trioxymethylene , (CH20)3, is a solid polymer, insoluble in water and ethanol. 

After distillation terminates (Ethanol boils at 78.4C), test your Safrole using the physical properties data below to confirm purity. Theoretically, your product should be better than 99% pure now. 

Properties. o-Nitiotoluene [88-72-2] is a clear yeUow liquid. The solid is dimorphous and the melting points of the a- and P-forms ate —9.55 and —3.85 C, respectively. o-Nitrotoluene is infinitely soluble in benzene, diethyl ether, and ethanol. It is soluble in most organic solvents and only slightly soluble in water (0.065 g in 100 g of water at 30°C). The physical properties of o-nitrotoluene are hsted in Table 9. 

Nitrotoluene [99-99-0] crystallizes in colorless rhombic crystals. It is only slightly soluble in water, 0.044 g/100 g of water at 30°C moderately soluble in methanol and ethanol and readily soluble in acetone, diethyl ether, and benzene. The physical properties of -nitrotoluene are Hsted in Table 11. 

Sodium iodide crystallizes ia the cubic system. Physical properties are given ia Table 1 (1). Sodium iodide is soluble ia methanol, ethanol, acetone, glycerol, and several other organic solvents. SolubiUty ia water is given ia Table 2. 

Styrene is a colorless Hquid with an aromatic odor. Important physical properties of styrene are shown in Table 1 (1). Styrene is infinitely soluble in acetone, carbon tetrachloride, benzene, ether, / -heptane, and ethanol. Nearly all of the commercial styrene is consumed in polymerization and copolymerization processes. Common methods in plastics technology such as mass, suspension, solution, and emulsion polymerization can be used to manufacture polystyrene and styrene copolymers with different physical characteristics, but processes relating to the first two methods account for most of the styrene polymers currendy (ca 1996) being manufactured (2—8). Polymerization generally takes place by free-radical reactions initiated thermally or catalyticaHy. Polymerization occurs slowly even at ambient temperatures. It can be retarded by inhibitors. 

Physical Properties. Ammonium thiocyanate [1762-95-4] NH SCN, is a hygroscopic crystalline soHd which deHquesces at high humidities (375,376). It melts at 149°C with partial isomerization to thiourea. It is soluble in water to the extent of 65 wt % at 25°C and 77 wt % at 60°C. It is also soluble to 35 wt % in methanol and 20 wt % in ethanol at 25°C. It is highly soluble in Hquid ammonia and Hquid sulfur dioxide, and moderately soluble in acetonitrile. 

Nicotinamide is a colorless, crystalline solid. It is very soluble in water (1 g is soluble in 1 mL of water) and in 95% ethanol (1 g is soluble in 1.5 mL of solvent). The compound is soluble in butanol, amyl alcohol, ethylene glycol, acetone, and chloroform, but is only slightly soluble in ether or benzene. Physical properties are Hsted in Table 1. 

Riboflavin forms fine yellow to orange-yeUow needles with a bitter taste from 2 N acetic acid, alcohol, water, or pyridine. It melts with decomposition at 278—279°C (darkens at ca 240°C). The solubihty of riboflavin in water is 10—13 mg/100 mL at 25—27.5°C, and in absolute ethanol 4.5 mg/100 mL at 27.5°C it is slightly soluble in amyl alcohol, cyclohexanol, benzyl alcohol, amyl acetate, and phenol, but insoluble in ether, chloroform, acetone, and benzene. It is very soluble in dilute alkah, but these solutions are unstable. Various polymorphic crystalline forms of riboflavin exhibit variations in physical properties. In aqueous nicotinamide solution at pH 5, solubihty increases from 0.1 to 2.5% as the nicotinamide concentration increases from 5 to 50% (9). 

Barium is a member of the aLkaline-earth group of elements in Group 2 (IIA) of the period table. Calcium [7440-70-2], Ca, strontium [7440-24-6], Sr, and barium form a closely aUied series in which the chemical and physical properties of the elements and thek compounds vary systematically with increa sing size, the ionic and electropositive nature being greatest for barium (see Calcium AND CALCIUM ALLOYS Calcium compounds Strontium and STRONTIUM compounds). As size increases, hydration tendencies of the crystalline salts increase solubiUties of sulfates, nitrates, chlorides, etc, decrease (except duorides) solubiUties of haUdes in ethanol decrease thermal stabiUties of carbonates, nitrates, and peroxides increase and the rates of reaction of the metals with hydrogen increase. 

Butadiene is a noncorrosive, colorless, flammable gas at room temperature and atmospheric pressure. It has a mildly aromatic odor. It is sparingly soluble in water, slightly soluble in methanol and ethanol, and soluble in organic solvents like diethyl ether, ben2ene, and carbon tetrachloride. Its important physical properties are summarized in Table 1 (see also references 11, 12). 1,2-Butadiene is much less studied. It is a flammable gas at ambient conditions. Some of its properties are summarized in Table 2. 

Table 2 gives physical property data for propylene chlorohydrins. 2-Chloro-l-propanol [78-89-7] HOCH2CHCICH2, is also named 2-propylene chlorohydrin, 2-chloropropyl alcohol, or 2-chloro-l-hydroxypropane. l-Chloro-2-propanol [127-00-4] CICH2CHOHCH2, also known as j -propjlene chlorohydrin, 1-chloroisopropyl alcohol, and l-chloro-2-hydroxypropane, is a colorless Hquid, miscible in water, ethanol, and ethyl ether. 

A summary of physical properties of ethyl alcohol is presented ia Table 1. Detailed information on the vapor pressure, density, and viscosity of ethanol can be obtained from References 6—14. A listing of selected biaary and ternary azeotropes of ethanol is compiled ia Reference 15. 

We can offer several kinds of evidence. Some comes from the behavior of ethanol in chemical reactions and some from the determination of certain physical properties. Let s consider the reactions first. 

All of the reactions and the physical properties of ethanol have been explained on the basis of the behavior of the OH group in structure 1, CH3CH5OH. This is true of most of the reactions of ethanol—the reaction centers at the OH group (which is called the hydroxyl group), and the remainder of the molecule, C2HS—, remains intact. The reactions lead to the suggestion that there are two parts in the molecule of ethanol, the H H... 

Set out your design on a data sheet and make a rough sketch of the heat exchanger. The physical properties of ethanol can be readily found in the literature. 

Data were obtained (Hovorka Kendall, Chem Eng Prog 56(8) 58, 1960) for the reaction between NaOH and ethyl acetate to form sodium acetate and ethanol in a tubular reactor 3.2 cm ID at 29.8 C in which the flow rate varied between 440 and 2072 cc/min.The feed consisted of 0.1 N solutions of NaOH and ethyl acetate. Assuming physical properties of water, the corresponding Reynolds numbers vary between 370 and 1720. Thus the flow is laminar. Analyze these data and then design (a) a batch reactor and (b) a CSTR for a feed rate of 100 liters/min and a conversion of 65%. 

Ethyl vinyl ether, 1 254, 258 derivation from ethanol, 10 557 physical properties of, l 255t Ethynylation, acetylene, 1 181, 231-249 Etretinate, 25 790 Etridiazole, 23 629... 

Owing to the unsatisfactory physical properties of the triglycerides, the oils are converted into fatty acid esters of low alcohols such as methanol or ethanol. 

---