Elimination amides

After standing in reactor 12, the mixture is cooled there down to 30 °C and filtered in nutsch filter 16 from diethylaminochloride. The filtrate is sent into tank 17 for distillation, and the filter cake is washed with toluene to eliminate amidation products as completely as possible. After the filtrate has been loaded, cooler 18 is filled with water, and the tank agitator is switched on. A residual pressure of 40-55 GPa is created in the system and the tank jacket is filled with a heat carrier or vapour. First, receptacle 20 receives toluene (below 60-65 °C) after separating toluene, amidation products are distilled into fractions. Receptacle 21 receives the intermediate fraction (below 106 °C) the distillation is monitored by the refraction index. At no20 = 1.4210+1.4230 the target fraction, diethylaminomethyl-triethoxysilane, is separated into receptacle 19. The distillation is continued up to 140 °C. As it accumulates, the intermediate fraction from receptacle 21 is sent into apparatus 12 for repeated amidation, and the ready product, diethylaminomethyltriethoxysilane, is sent after additional filtering (in case there is a filter cake) from receptacle 19 into collector 22. 

Hydrazone 244a and ethyl cyanoacetate yielded 245a but required long reflux with azeotropic elimination of water. When water was not eliminated amide 245b was the sole isolable product. Condensing 242... 

By treatment of an amide with sodium hypobromite or sodium hypochlorite solution (or with the halogen and alkali), the amine of one less carbon atom is produced, the net result being the elimination of the carbonyl group. An example is ... 

If alkyl groups are attached to the ylide carbon atom, cis-olefins are formed at low temperatures with stereoselectivity up to 98Vo. Sodium bis(trimethylsilyl)amide is a recommended base for this purpose. Electron withdrawing groups at the ylide carbon atom give rise to trans-stereoselectivity. If the carbon atom is connected with a polyene, mixtures of cis- and rrans-alkenes are formed. The trans-olefin is also stereoseiectively produced when phosphonate diester a-carbanions are used, because the elimination of a phosphate ester anion is slow (W.S. Wadsworth, 1977). 

The reaction of alkenyl mercurials with alkenes forms 7r-allylpalladium intermediates by the rearrangement of Pd via the elimination of H—Pd—Cl and its reverse readdition. Further transformations such as trapping with nucleophiles or elimination form conjugated dienes[379]. The 7r-allylpalladium intermediate 418 formed from 3-butenoic acid reacts intramolecularly with carboxylic acid to yield the 7-vinyl-7-laCtone 4I9[380], The /i,7-titisaturated amide 421 is obtained by the reaction of 4-vinyl-2-azetidinone (420) with an organomercur-ial. Similarly homoallylic alcohols are obtained from vinylic oxetanes[381]. 

The terminal diyne 320 is prepared by coupling of the zinc acetylide 318 with /rfln.s-l-iodo-2-chloroethylenc (319), followed by elimination of HCI with sodium amide[231]. Similarly, terminal di- and triynes are prepared by using cw-l,2-dichloroethylene[232]. The 1-alkenyl or l-aryl-2-(perefluoroalkyl) acetylene 321 is prepared by the reaction of a zinc acetylide with halides[233]. 

As a further application of the reaction, the conversion of an endocyclic double bond to an c.xo-methylene is possible[382]. The epoxidation of an cWo-alkene followed by diethylaluminum amide-mediated isomerization affords the allylic alcohol 583 with an exo double bond[383]. The hydroxy group is eliminated selectively by Pd-catalyzed hydrogenolysis after converting it into allylic formate, yielding the c.ro-methylene compound 584. The conversion of carvone (585) into l,3-disiloxy-4-methylenecyclohexane (586) is an example[382]. 

Two moles of /3-alkoxyaicene can condense on each other by means of their a- and /3-carbon atoms. The resulting intermediate reacts on the anhydrobase by elimination of a molecule of ethanol resulting in a neocyanine formation (Schemes 59 and 60). Both monoanilino and bis-anilino derivatives resulting from the condensation of dimethylform-amide have been isolated. They are capable of furnishing various condensations on either ketomethylene or another reactive nucleus (Scheme 61). 

The acidity of acetylene and terminal alkynes permits them to be converted to their conjugate bases on treatment with sodium amide These anions are good nucleophiles and react with methyl and primary alkyl halides to form carbon-carbon bonds Secondary and tertiary alkyl halides cannot be used because they yield only elimination products under these conditions... 

Double dehydrohalogenation of gemmal dihalides (Section 9 7) An E2 elimination reaction of a gemmal dihalide yields an alkenyl halide If a strong enough base IS used sodium amide for example a second elimination step follows the first and the alkenyl halide IS converted to an alkyne... 

Although nucleophilic aromatic substitution by the elimination-addition mecha nism IS most commonly seen with very strong amide bases it also occurs with bases such as hydroxide ion at high temperatures A labeling study revealed that hydroly SIS of chlorobenzene proceeds by way of a benzyne intermediate... 

Nucleophilic aromatic substitution can also occur by an elimination-addition mechanism This pathway is followed when the nucleophile is an exceptionally strong base such as amide ion m the form of sodium amide (NaNH2) or potassium amide (KNH2) Benzyne and related arynes are intermediates m nucleophilic aromatic substitutions that pro ceed by the elimination-addition mechanism... 

Ketenimines are usually prepared from carboxyHc acid derivatives such as amides and imino chlorides via elimination and from nitriles via alkylation with alkyl haHdes under strong basic conditions (21,64). 

Phosphoms halides are subject to reactions with active hydrogen compounds and result in the elimination of hydrogen halide. They are convenient reagents in the synthesis of many esters, amides, and related compounds. However, because the involved hydrogen halide frequendy catalyzes side reactions, it is usually necessary to employ a hydrogen halide scavenger to remove the by-product. 

Potassium Amides. The strong, extremely soluble, stable, and nonnucleophilic potassium amide base (42), potassium hexamethyldisilazane [40949-94-8] (KHMDS), KN [Si(CH2]2, pX = 28, has been developed and commercialized. KHMDS, ideal for regio/stereospecific deprotonation and enolization reactions for less acidic compounds, is available in both THF and toluene solutions. It has demonstrated benefits for reactions involving kinetic enolates (43), alkylation and acylation (44), Wittig reaction (45), epoxidation (46), Ireland-Claison rearrangement (47,48), isomerization (49,50), Darzen reaction (51), Dieckmann condensation (52), cyclization (53), chain and ring expansion (54,55), and elimination (56). 

Trialkanolamines caimot form amides, but they do give esters at temperatures sufftciendy high to eliminate water. 

Prilocaine hydrochloride [1786-81-8] is also similar in profile to Hdocaine, although prilocaine has significantly less vasodilator activity. Prilocaine is the least toxic of the amino amide local anesthetics. However, its tendency to cause methemoglobinemia, especially in newborns, has eliminated its use in obstetric surgery. 

Condensa.tlon, This term covers all processes, not previously iacluded ia other process definitions, where water or hydrogen chloride is eliminated ia a reaction involving the combination of two or more molecules. The important condensation reactions are nitrogen and sulfur heterocycle formation, amide formation from acid chlorides, formation of substituted diphenyl amines, and misceUaneous cyclizations. 

Hydrolysis of esters and amides by enzymes that form acyl enzyme intermediates is similar in mechanism but different in rate-limiting steps. Whereas formation of the acyl enzyme intermediate is a rate-limiting step for amide hydrolysis, it is the deacylation step that determines the rate of ester hydrolysis. This difference allows elimination of the undesirable amidase activity that is responsible for secondary hydrolysis without affecting the rate of synthesis. Addition of an appropriate cosolvent such as acetonitrile, DMF, or dioxane can selectively eliminate undesirable amidase activity (128). 

Esters are most commonly prepared by the reaction of a carboxyHc acid and an alcohol with the elimination of water. Esters are also formed by a number of other reactions utilizing acid anhydrides, acid chlorides, amides, nitriles, unsaturated hydrocarbons, ethers, aldehydes, ketones, alcohols, and esters (via ester interchange). Detailed reviews of esterification are given in References 1—9. 

Under conditions similar to those already outlined, stable aziridin imine derivatives, e.g. (422) and (423), can be prepared in excellent yields (70-80%) by treating the appropriate a-bromoamidines (easily accessible from the amide precursor) with potassium t-butoxide in ether <70AG(E)38l). At low temperatures the elimination proceeds with high regio- and stereo-selectivity at -40 °C (421) yields predominantly (422). 

Amides are stable compounds. The lower-melting members (such as acetamide) can be readily purified by fractional distillation. Most amides are solids which have low solubilities in water. They can be recrystallised from large quantities of water, ethanol, ethanol/ether, aqueous ethanol, chloroform/toluene, chloroform or acetic acid. The likely impurities are the parent acids or the alkyl esters from which they have been made. The former can be removed by thorough washing with aqueous ammonia followed by recrystallisation, whereas elimination of the latter is by trituration or recrystallisation from an organic solvent. Amides can be freed from solvent or water by drying below their melting points. These purifications can also be used for sulfonamides and acid hydrazides. 

Aromatic ethers and furans undergo alkoxylation by addition upon electrolysis in an alcohol containing a suitable electrolyte.Other compounds such as aromatic hydrocarbons, alkenes, A -alkyl amides, and ethers lead to alkoxylated products by substitution. Two mechanisms for these electrochemical alkoxylations are currently discussed. The first one consists of direct oxidation of the substrate to give the radical cation which reacts with the alcohol, followed by reoxidation of the intermediate radical and either alcoholysis or elimination of a proton to the final product. In the second mechanism the primary step is the oxidation of the alcoholate to give an alkoxyl radical which then reacts with the substrate, the consequent steps then being the same as above. The formation of quinone acetals in particular seems to proceed via the second mechanism. ... 

In the case of esters, carboxylate anions, amides, and acid chlorides, the tetrahedral adduct may undergo elimination. The elimination forms a ketone, permitting a second addition step to occur. The rate at which breakdown of the tetrahedral adduct occurs is a function of the reactivity of the heteroatom substituent as a leaving group. The order of stability of the... 

Insight into the factors that govern breakdown of tetrahedral intermediates has also been gained by studying the hydrolysis of amide acetals. If the amine is expelled, an ester is formed, whereas elimination of an alcohol gives an amide ... 

Ester eliminations are normally one of two types, base catalyzed or pyrolytic. The usual choice for base catalyzed j5-elimination is a sulfonate ester, generally the tosylate or mesylate. The traditional conditions for elimination are treatment with refluxing collidine or other pyridine base, and rearrangement may occur. Alternative conditions include treatment with variously prepared aluminas, amide-metal halide-carbonate combinations, and recently, the use of DMSO either alone or in the presence of potassium -butoxide. 

Tosylates also undergo elimination upon treatment with lithium salts in amide solvents. The a,/ -unsaturated ketone (106) is formed from the a-hy-droxy ketone tosylate in a fashion analogous to a-halo ketone eliminations. 

MonofluoToalkanes and vicinal difluoroalkanes are dehydrofluonnated if strong enough bases are applied [10 12] In 5-fluorononane and fluorocyclodo-decane, elimination by means of sodium methoxide in methanol gives cis- and trans allcenes in respective yields of 8 and 21% and in ratios of 1 2 2 2 4, however, the bulky lithium diisopropyl amide m tetrahydrofuran produces trdns-isomers almost exclusively The strength of the base does not have much effect on the rate of elimination, but the lithium cation causes considerable acceleration [10] (equation 10)... 

---