Electrochemical transition metals

Polyquiaolines have been used as polymer supports for transition-metal cataly2ed reactions. The coordinatkig abiUty of polyqukioline ligands for specific transition metals has allowed thek use as catalysts ki hydroformylation reactions (99) and for the electrochemical oxidation of primary alcohols (100). 

Soluble and weU-characterized polygermane homopolymers, (R Ge), and their copolymers with polysdanes have been prepared by the alkaH metal coupling of diorgano-substituted dihalogermanes (137—139), via electrochemical methods (140), and by transition-metal catalyzed routes (105), as with the synthesis of polysdanes. 

Coupling of butadiene with CO2 under electrochemically reducing conditions produces decadienedioic acid, and pentenoic acid, as weU as hexenedioic acid (192). A review article on diene telomerization reactions catalyzed by transition metal catalysts has been pubUshed (193). 

Transition metal complexes with 2,2 -bipyridine ligands in anion-selective recognition and optical/electrochemical sensing 96CC689. 

Chloroaluminate(III) ionic liquid systems are perhaps the best established and have been most extensively studied in the development of low-melting organic ionic liquids with particular emphasis on electrochemical and electrodeposition applications, transition metal coordination chemistry, and in applications as liquid Lewis acid catalysts in organic synthesis. Variable and tunable acidity, from basic through neutral to acidic, allows for some very subtle changes in transition metal coordination chemistry. The melting points of [EMIM]C1/A1C13 mixtures can be as low as -90 °C, and the upper liquid limit almost 300 °C [4, 6]. 

This is surprising in view of the fact that a great deal of effort was made to study transition metal complexes in chloroaluminate ionic liquids in the 1980s and early 1990s (see Section 6.1 for some examples). The investigations at this time generally started with electrochemical studies [41], but also included spectroscopic and complex chemistry experiments [42]. 

The wide electrochemical windows of ionic liquids, in combination with their ability to serve as solvents for transition metal catalysts, opens up new possibilities for a combination of electrochemistry and transition metal catalysis. A very exciting first example has recently been published by Bedioui et al. [27]. 

This review focuses on the structural stability of transition metal oxides to lithium insertion/extraction rather than on their electrochemical performance. The reader should refer to cited publications to access relevant electrochemical data. Because of the vast number of papers on lithium metal oxides that have been published since the 1970s, only a selected list of references has been provided. 

Some cations with an octahedral-site preference (such as Ni2+, Co3+, and Cr3+) are expected to occupy the 16d sites of the spinel with Mn, whereas cations with a strong tetrahedral-site preference (such as Zn2+) are expected to occupy the 8a sites and to dislodge corresponding lithium ions into the 16d sites. In cases where Mn is substituted by transition metal ions (such as Co, Ni, and Cr) that can partake in the electrochemical reaction, voltage plateaus between 4 and 5V have been observed [135, 136],... 

A series of solid transition-metal chlorides can be used as positive electrodes in cells with sodium as the negative electrode. The various metal chlorides form electrochemical pairs with sodium showing different emf values (Table 1 ). 

There are three types of electron transfers, firstly the generation of an electron electrochemically, by y-irradiation, or by photolytic dissociation, secondly the transfer of an electron from an inorganic or organic compound, referred to as a nucleophilic homolytic leaving group (Zollinger, 1973 a), and thirdly a transfer from a transition metal or transition metal ion complex. In this section we will discuss the fundamental aspects of these three types. In the following sections and in Chapter 10, specific examples and synthetic applications will be summarized. 

Figure 7.9. Schematic representation of the density of states N(E) in the conduction band of two transition metal electrodes (W and R) and of the definitions of work function O, chemical potential of electrons p, electrochemical potential of electrons or Fermi level p, surface potential x, Galvani (or inner) potential (p and Volta (or outer) potential for the catalyst (W) and for the reference electrode (R). The measured potential difference UWr is by definition the difference in p q>, p and p are spatially uniform O and can vary locally on the metal surfaces 21 the T terms are equal, see Fig. 5.18, for the case of fast spillover, in which case they also vanish for an overall neutral cell Reprinted with permission from The Electrochemical Society.

Electropolymerization is also an attractive method for the preparation of modified electrodes. In this case it is necessary that the forming film is conductive or permeable for supporting electrolyte and substrates. Film formation of nonelectroactive polymers can proceed until diffusion of electroactive species to the electrode surface becomes negligible. Thus, a variety of nonconducting thin films have been obtained by electrochemical oxidation of aromatic phenols and amines Some of these polymers have ligand properties and can be made electroactive by subsequent inincorporation of transition metal ions... 

Polynuclear transition metal cyanides such as the well-known Prussian blue and its analogues with osmium and ruthenium have been intensely studied Prussian blue films on electrodes are formed as microcrystalline materials by the electrochemical reduction of FeFe(CN)g in aqueous solutionThey show two reversible redox reactions, and due to the intense color of the single oxidation states, they appear to be candidates for electrochromic displays Ion exchange properties in the reduced state are limited to certain ions having similar ionic radii. Thus, the reversible... 

Transition Metal and Organic Redox-Active Macrocycles Designed to Electrochemically Recognize Charged and Neutral Guest Species Paul D. Beer... 

Electrochemical properties of various transition metal oxides for energy storage... 

Tiibutsch H (1978) Hole reactions from d-energy bands of layer type group VI transition metal dichalcogenides New perspectives for electrochemical solar energy conversion. J... 

Unal U, Matsumoto Y, Tanaka N, Kimura Y, Tamoto N (2003) Electrostatic self-assembly deposition of Titanate(IV) layered oxides intercalated with transition metal complexes and their electrochemical properties. J Phys Chem B 107 12680-12689... 

A critical review on the foundation and earlier results on metal intercalates of the transition metal dichalcogenides and related host materials can be found in the seminal paper of Whittingham [53]. The electrochemical and transport properties... 

Reeve RW, Christensen PA, Hamnett A, Haydock SA, Roy SC (1998) Methanol tolerant oxygen reduction catalysts based on transition metal sulfides. J Electrochem Soc 145 3463-... 

Of special Interest as O2 reduction electrocatalysts are the transition metal macrocycles In the form of layers adsorptlvely attached, chemically bonded or simply physically deposited on an electrode substrate Some of these complexes catalyze the 4-electron reduction of O2 to H2O or 0H while others catalyze principally the 2-electron reduction to the peroxide and/or the peroxide elimination reactions. Various situ spectroscopic techniques have been used to examine the state of these transition metal macrocycle layers on carbon, graphite and metal substrates under various electrochemical conditions. These techniques have Included (a) visible reflectance spectroscopy (b) laser Raman spectroscopy, utilizing surface enhanced Raman scattering and resonant Raman and (c) Mossbauer spectroscopy. This paper will focus on principally the cobalt and Iron phthalocyanlnes and porphyrins. 

---