Diethyl ether polarity

Dramatic rate accelerations of [4 + 2]cycloadditions were observed in an inert, extremely polar solvent, namely in5 M solutions oflithium perchlorate in diethyl ether(s 532 g LiC104 per litre ). Diels-Alder additions requiring several days, 10—20 kbar of pressure, and/ or elevated temperatures in apolar solvents are achieved in high yields in some hours at ambient pressure and temperature in this solvent (P.A. Grieco, 1990). Also several other reactions, e.g, allylic rearrangements and Michael additions, can be drastically accelerated by this magic solvent. The diastereoselectivities of the reactions in apolar solvents and in LiClO EtjO are often different or even complementary and become thus steerable. 

Reaction of ethyl iodide with triethylamine [(CH3CH2)3N ] yields a crystalline compound CgH2oNI in high yield This compound is soluble in polar solvents such as water but insoluble in nonpolar ones such as diethyl ether It does not melt below about 200°C Suggest a reasonable structure for this product... 

Organohthium and organomagnesium compounds are stable species when prepared m suitable solvents such as diethyl ether They are strongly basic however and react instantly with proton donors even as weakly acidic as water and alcohols A proton is transferred from the hydroxyl group to the negatively polarized carbon of the organometallic compound to form a hydrocarbon... 

Ethers like water and alcohols are polar molecules Diethyl ether for example has a dipole moment of 1 2 D Cyclic ethers have larger dipole moments ethylene oxide and tetrahydrofuran have dipole moments m the 1 7 to 1 8 D range—about the same as that of water (1 8D)... 

Lipids differ from the other classes of naturally occurring biomolecules (carbohy drates proteins and nucleic acids) in that they are more soluble m nonpolar to weakly polar solvents (diethyl ether hexane dichloromethane) than they are m water They include a variety of structural types a collection of which is introduced m this chapter... 

Anionic polymerization of vinyl monomers can be effected with a variety of organometaUic compounds alkyllithium compounds are the most useful class (1,33—35). A variety of simple alkyllithium compounds are available commercially. Most simple alkyllithium compounds are soluble in hydrocarbon solvents such as hexane and cyclohexane and they can be prepared by reaction of the corresponding alkyl chlorides with lithium metal. Methyllithium [917-54-4] and phenyllithium [591-51-5] are available in diethyl ether and cyclohexane—ether solutions, respectively, because they are not soluble in hydrocarbon solvents vinyllithium [917-57-7] and allyllithium [3052-45-7] are also insoluble in hydrocarbon solutions and can only be prepared in ether solutions (38,39). Hydrocarbon-soluble alkyllithium initiators are used directiy to initiate polymerization of styrene and diene monomers quantitatively one unique aspect of hthium-based initiators in hydrocarbon solution is that elastomeric polydienes with high 1,4-microstmcture are obtained (1,24,33—37). Certain alkyllithium compounds can be purified by recrystallization (ethyllithium), sublimation (ethyllithium, /-butyUithium [594-19-4] isopropyllithium [2417-93-8] or distillation (j -butyUithium) (40,41). Unfortunately, / -butyUithium is noncrystaUine and too high boiling to be purified by distiUation (38). Since methyllithium and phenyllithium are crystalline soUds which are insoluble in hydrocarbon solution, they can be precipitated into these solutions and then redissolved in appropriate polar solvents (42,43). OrganometaUic compounds of other alkaU metals are insoluble in hydrocarbon solution and possess negligible vapor pressures as expected for salt-like compounds. 

The dihydrate is very soluble ia polar solvents, such as methanol, ethanol, acetone, dioxane, and tetrahydrofuran, but insoluble ia benzene, chloroform, and petroleum ether. SolubiUty of the dihydrate ia diethyl ether (1.47 g/100 g solvent) is different from that of the anhydrous form (23.6 g/100 g solvent). 

Pyrrole is soluble in alcohol, benzene, and diethyl ether, but is only sparingly soluble in water and in aqueous alkaUes. It dissolves with decomposition in dilute acids. Pyrroles with substituents in the -position are usually less soluble in polar solvents than the corresponding a-substituted pyrroles. Pyrroles that have no substituent on nitrogen readily lose a proton to form the resonance-stabilized pyrrolyl anion, and alkaU metals react with it in hquid ammonia to form salts. However, pyrrole pK = ca 17.5) is a weaker acid than methanol (11). The acidity of the pyrrole hydrogen is gready increased by electron-withdrawing groups, eg, the pK of 2,5-dinitropyrrole [32602-96-3] is 3.6 (12,13). 

For example, carbon dioxide from air or ethene nitrogen oxides from nitrogen methanol from diethyl ether. In general, carbon dioxide, carbon monoxide, ammonia, hydrogen sulfide, mercaptans, ethane, ethene, acetylene (ethyne), propane and propylene are readily removed at 25°. In mixtures of gases, the more polar ones are preferentially adsorbed). 

Bonhote and co-workers [10] reported that ILs containing triflate, perfluorocar-boxylate, and bistrifylimide anions were miscible with liquids of medium to high dielectric constant (e), including short-chain alcohols, ketones, dichloromethane, and THF, while being immiscible with low dielectric constant materials such as alkanes, dioxane, toluene, and diethyl ether. It was noted that ethyl acetate (e = 6.04) is miscible with the less-polar bistrifylimide and triflate ILs, and only partially miscible with more polar ILs containing carboxylate anions. Brennecke [15] has described miscibility measurements for a series of organic solvents with ILs with complementary results based on bulk properties. 

From empirical observation, ILs tend to be immiscible with non-polar solvents. They can therefore be washed or brought into contact with diethyl ether or hexane to extract non-polar reaction products. Among solvents of greater polarity, esters (ethyl acetate, for example) exhibit variable solubility with ILs, depending on the nature of the IL. Polar or dipolar solvents (including chloroform, acetonitrile, and methanol) appear to be totally miscible with all ILs (excepting tetrachloroaluminate IL and the like, which react). Among notable exceptions, [EMIMJCl and [BMIMJCl are insoluble in dry acetone. 

For the deprotonation of less acidic precursors, which do not lead to mesomerically stabilized anions, butyllithium/TMEDA in THF or diethyl ether, or the more reactive, but more expensive,. seobutyllithium under these conditions usually are the most promising bases. Het-eroatomic substitution on the allylic substrate, which docs not contribute to the mesomeric or inductive stabilization often facilitates lithiation dramatically 58. In lithiations, in contrast to most other metalations, the kinetic acidity, caused by complexing heteroatom substituents, may override the thermodynamic acidity, which is estimated from the stabilization of the competing anions. These directed lithiations59 should be performed in the least polar solvent possible, e.g.. diethyl ether, toluene, or even hexane. 

The reaction is best performed in THF. In less polar solvents such as diethyl ether or benzene, the chemical yields are significantly lower. 

Ethers are more volatile than alcohols of the same molar mass because their molecules do not form hydrogen bonds to one another (Fig. 19.2). They are also less soluble in water because they have a lower ability to form hydrogen bonds to water molecules. Because ethers are not very reactive and have low molecular polarity, they are useful solvents for other organic compounds. However, ethers are flammable diethyl ether is easily ignited and must be used with great care. 

Aqueous solutions are not suitable solvents for esterifications and transesterifications, and these reactions are carried out in organic solvents of low polarity [9-12]. However, enzymes are surrounded by a hydration shell or bound water that is required for the retention of structure and catalytic activity [13]. Polar hydrophilic solvents such as DMF, DMSO, acetone, and alcohols (log P<0, where P is the partition coefficient between octanol and water) are incompatible and lead to rapid denaturation. Common solvents for esterifications and transesterifications include alkanes (hexane/log P=3.5), aromatics (toluene/2.5, benzene/2), haloalkanes (CHCI3/2, CH2CI2/I.4), and ethers (diisopropyl ether/1.9, terf-butylmethyl ether/ 0.94, diethyl ether/0.85). Exceptionally stable enzymes such as Candida antarctica lipase B (CAL-B) have been used in more polar solvents (tetrahydrofuran/0.49, acetonitrile/—0.33). Room-temperature ionic liquids [14—17] and supercritical fluids [18] are also good media for a wide range of biotransformations. 

The most common mobile phase is a gradient of petroleum ether or hexane with increasing concentrations of acetone or diethyl ether. Development of the column should be optimized for each sample to afford a quick and effective separation to avoid band broadening. The separation can be followed visually. The most non-polar a- and 3-carotenes are eluted first as a yellow band followed by the chlorophylls and other more polar carotenoids like cryptoxanthin, lutein, and zeaxanthin that frequently fuse together and appear as a single band. ... 

However, complete hydrolysis of carotenoid esters sometimes is not achieved in 1 to 3 hr. The saponification degree can be verified easily by the presence of carotenol ester peaks eluting later than the peaks of P-carotene on reversed phase columns. Retinol palmitate, added as an internal standard to orange juice, also serves to indicate whether saponification is complete, since it is converted to retinol which elutes at lower retention time. The mixture is subsequently washed with water until free of alkali in a separatory funnel. Other more polar solvents such as CH2CI2 or EtOAc, and diethyl ether alone or mixtured with petroleum ether can be used to increase the recovery of polar xanthophylls from the water phase. 

The most critical decision to be made is the choice of the best solvent to facilitate extraction of the drug residue while minimizing interference. A review of available solubility, logP, and pK /pKb data for the marker residue can become an important first step in the selection of the best extraction solvents to try. A selected list of solvents from the literature methods include individual solvents (n-hexane, " dichloromethane, ethyl acetate, acetone, acetonitrile, methanol, and water ) mixtures of solvents (dichloromethane-methanol-acetic acid, isooctane-ethyl acetate, methanol-water, and acetonitrile-water ), and aqueous buffer solutions (phosphate and sodium sulfate ). Hexane is a very nonpolar solvent and could be chosen as an extraction solvent if the analyte is also very nonpolar. For example, Serrano et al used n-hexane to extract the very nonpolar polychlorinated biphenyls (PCBs) from fat, liver, and kidney of whale. One advantage of using n-hexane as an extraction solvent for fat tissue is that the fat itself will be completely dissolved, but this will necessitate an additional cleanup step to remove the substantial fat matrix. The choice of chlorinated hydrocarbons such as methylene chloride, chloroform, and carbon tetrachloride should be avoided owing to safety and environmental concerns with these solvents. Diethyl ether and ethyl acetate are other relatively nonpolar solvents that are appropriate for extraction of nonpolar analytes. Diethyl ether or ethyl acetate may also be combined with hexane (or other hydrocarbon solvent) to create an extraction solvent that has a polarity intermediate between the two solvents. For example, Gerhardt et a/. used a combination of isooctane and ethyl acetate for the extraction of several ionophores from various animal tissues. 

If the analyte contains either an acidic or a basic functionality, adjusting the pH of the extraction solvent to make the analyte either ionic or nonionic may be advantageous. To make an analyte that contains an acidic or basic functionality nonionic for extraction into a nonpolar solvent, a small amount (5% or less) of an organic acid (such as acetic acid or trifluoroacetic acid) or organic base (triethylamine) along with methanol (about 10%) can be added to diethyl ether or ethyl acetate. Conversely, buffered solutions can be used to control the pH precisely in such a way as to control the charge on an analyte and thus improve its extraction efficiency into polar solvents. 

---