Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Dicarbonyl heterocycles

The conversion of furans by oxidative acetylation or methoxylation to 2,5-diacetoxy- or 2,5-dimethoxy-2,5-dihydrofurans respectively, and their subsequent hydrogenation to the corresponding tetrahydrofurans, provides a useful source of protected 1,4-dicarbonyl compounds capable of conversion inter alia into the other five-membered heterocycles [Pg.142]

The reaction of tnfluoromethyl-substituted A -acyl umnes toward nucleophiles in many aspects parallels that of the parent polyfluoro ketones Heteronucleophiles and carbon nucleophiles, such as enarmnes [37, 38], enol ethers [38, 39, 40], hydrogen cyanide [34], tnmethylsilylcarbomlnle [2,47], alkynes [42], electron-nch heterocycles [43], 1,3-dicarbonyl compounds [44], organolithium compounds [45, 46, 47, 48], and Gngnard compounds [49,50], readily undergo hydroxyalkylation with hexafluoroace-tone and amidoalkylation with acyl imines denved from hexafluoroacetone... [Pg.842]

Use of )3-dicarbonyl compounds in heterocyclic syntheses is, of course, well established, but an interest in vinylogous amides or vinylogous ureas as reactive intermediates has been increased by the current appreciation of enamine chemistry (592-594). [Pg.439]

Subsequent to Hantzsch s communication for the construction of pyridine derivatives, a number of other groups have reported their efforts towards the synthesis of the pyridine heterocyclic framework. Initially, the protocol was modified by Beyer and later by Knoevenagel to allow preparation of unsymmetrical 1,4-dihydropyridines by condensation of an alkylidene or arylidene P-dicarbonyl compound with a P-amino-a,P-unsaturated carbonyl compound. Following these initial reports, additional modifications were communicated and since these other methods fall under the condensation approach, they will be presented as variations, although each of them has attained the status of named reaction . [Pg.307]

The Pictet-Spengler reaction is one of the key methods for construction of the isoquinoline skeleton, an important heterocyclic motif found in numerous bioactive natural products. This reaction involves the condensation of a P-arylethyl amine 1 with an aldehyde, ketone, or 1,2-dicarbonyl compound 2 to give the corresponding tetrahydroisoquinoline 3. These reactions are generally catalyzed by protic or Lewis acids, although numerous thermally-mediated examples are found in the literature. Aromatic compounds containing electron-donating substituents are the most reactive substrates for this reaction. [Pg.469]

The reactions of heterocyclic 1,2-dicarbonyl compounds with diazomethane, which were studied by Eistert and his co-workers in... [Pg.282]

The use of microwaves for the preparation of aromatic five-membered heterocycles has been intensely investigated with excellent results in terms of yields and purities of the products prepared. The Paal-Knorr reaction, namely the cyclocondensation of a 1,4-dicarbonyl compound to give furans, pyrroles and thiophenes has been successfully carried out with the aid of microwaves. [Pg.217]

The majority of nonsteroidal antiinflammatory agents contain an acidic carboxyl group. A series of experimental agents in this class have been prepared in which the acidic proton is supplied by a highly enolizable proton from a function such as a p-dicarbonyl incorporated into a heterocyclic system. As an example, an acylated, highly oxidized isoquinoline moiety can fulfill this function (see also the benzo-thiazines below). Toward this end, reaction of... [Pg.378]

A review is available of the synthesis of polyhydroxyalkyl substituted heterocycles, including furans, by condensations of aldose and ketose sugars with / -dicarbonyl compounds.Ih... [Pg.169]

Microwave-mediated transesterification of commercially available neat poly(styr-ene-co-allyl alcohol) with ethyl 3-oxobutanoate, ethyl 3-phenyl-3-oxopropanoate, and diethyl malonate provided the desired polymer-supported /i-dicarbonyl compounds (Scheme 12.18) [65]. Multigram quantities of these interesting building blocks for heterocycle synthesis were obtained simply by exposing the neat mixture of reagents to microwave irradiation in a domestic microwave oven for 10 min. [Pg.418]

The formation of quinoxaline heterocyclic systems is a well-known transformation of benzofuroxanes, which occurs in the presence of /3-dicarbonyl compounds <2001RJ0891, 2003BMC2149, 2003EJM791, 2005JME2019>. For example, the synthesis of quinoxaline 1,4-di-jV-oxides was carried out by reaction of the appropriate benzofuroxane 69 with the corresponding /3-ketoester, using triethylamine as the catalyst (Scheme 15) <2005JME2019>. [Pg.334]

Diaminofurazans 156 are useful starting materials for the synthesis of fused heterocyclic compounds. For example, 3,4-diaminofurazans 156 reacted with dicarbonyl compounds (e.g., with ct-keto acids) to produce a series of 5-hydroxy[l,2,5]oxadiazolo[3,4-A pyrazines 163 (Equation 26) <2003BML3133>. [Pg.348]

Strecker aldehyde are generated by rearrangement, decarboxylation and hydrolysis. Thus the Strecker degradation is the oxidative de-amination and de-carboxylation of an a-amino acid in the presence of a dicarbonyl compound. An aldehyde with one fewer carbon atoms than the original amino acid is produced. The other class of product is an a-aminoketone. These are important as they are intermediates in the formation of heterocyclic compounds such as pyrazines, oxazoles and thiazoles, which are important in flavours. [Pg.17]

Cyclocondensation processes of p-dicarbonyl derivatives or their analogues are still widely employed for the synthesis of new isoxazoles. Non-proteinogenic heterocyclic substituted ct-amino acids have been synthesised using the alkynyl ketone functionality as a versatile building block ynone 2, derived from protected L-aspartic acid 1, reacted with hydroxylamine hydrochloride affording the isoxazole 3 with enantiomeric purity greater than 98% ee <00 JCS(P 1 )2311 >. [Pg.217]

An example for the combination of mechanistically different reactions is the anionic-pericydic process such as the domino-Knoevenagd-hetero-Diels-Alder reaction. In the inter-intramolecular version of this process an aldehyde 1 containing a dienophile moiety and a 1,3-dicarbonyl compound 2 can be mixed together to give unusual heterocycles of diversified structures such as 4 via the intermediate formation of an 1-oxa-l,3-butadiene 3 (scheme 1).[41... [Pg.40]

Highly substituted pyrrolo[l,2- ][l,2,4]triazines were synthesized from pyrrole derivatives, by closure of the triazine ring. Thus, hydrolytic cleavage of some 1,2-diaminopyrroles having a 1-NH-BOC-protected amino function 43 followed by reaction with 1,2-dicarbonyl compounds afforded a one-pot access to the corresponding bicyclic heterocycles 44 (BOC = f-butoxycarbonyl Equation 6) < 1997J(P 1)1829>. [Pg.635]

Thierry Constantieux was born in Pau, France, on 6 May 1968. After studying chemistry at the University Bordeaux I, France, he completed his PhD under the supervision of Dr. J.-P. Picard and Dr. J. Dunoguez in 1994. He completed his Habilitation in 2004, at the University Paul Cezanne, Marseille, France, where he is currently Professor of Organic Chemistry. His main research interest is focused on the development of domino multicomponent reactions from 1,3-dicarbonyl compounds, and their applications in heterocyclic chemistry. [Pg.644]

Catalysed alkylation of tosylmethylisocyanate (TOSMIC) [63, 64] has extended its versatility in the preparation of l, 4-dicarbonyl compounds and as a l, 3-dipolar precursor for the synthesis of heterocyclic compounds. The alkylation reactions should not be conducted in carbon disulphide, as nucleophilic attack by the methylene group on the carbon disulphide leads, after ring closure and S-alkylation, to a 4-alkylthio-1,3-thiazole system [65]. [Pg.244]

Heterocyclic Fused Tropones and Tropolones from Carbonyl and Heterocyclic Dicarbonyl Compounds (Scheme 8)... [Pg.92]

The pyridine ring system may carry snbstituents, jnst as we have seen with benzene rings. We have enconn-tered a nnmber of snch derivatives in the previons section. Hydroxy or amino heterocycles, however, may sometimes exist in tautomeric forms. We have met the concept of tantomerism primarily with carbonyl componnds, and have seen the isomerization of keto and enol tantomers (see Section 10.1). In certain cases, e.g. 1,3-dicarbonyl componnds, the enol form is a major component of the eqnilibrinm mixtnre. In the example shown, liquid acetylacetone contains about 76% of the enol tautomer. [Pg.416]

The scope was illustrated with 35 examples using various P-ketoesters as well as acetylacetone as 1,3-dicarbonyl compound. The use of aliphatic a,P-unsaturated aldehydes resulted in low yield and inferior enantioselectivity. Transformation of the DHP products into other optically active heterocyclic... [Pg.430]

It should be noted that carbonyl compounds, more often aldehydes, are usual second reagent in both the groups. Other building-blocks in these multicomponent processes, leading to the formation of five-, six-, and seven-membered heterocycles, can be numerous acids and their derivatives, p-dicarbonyl compounds or other CH-acids, isocyanides, etc. At this, three-component reactions of ABC and ABB types [32] are the most typical for aminoazole, although some four-component ABCC processes were also published. [Pg.43]

On the other hand, Lipson and co-authors in their pubhcations described numerous MCRs of cyclic (3-dicarbonyl compounds and aldehydes with 5-amino-3-methylpy-razole [84], 3-amino-1,2,4-triazole [90], 3-amino-5-methyltio-l,2,4-triazole [91], 2-aminobenimidazole [92], and 2,5-diamino-l,2,4-triazole [93]. It was shown that multicomponent treatments studied in the case of these aminoazoles should proceed via preliminary formation of corresponding enamines, which were isolated and subsequently transformed into target heterocycles (Scheme 28). Intermediates... [Pg.59]

Keywords 1,3-Dicarbonyls, Biginelh reaction, Hantzsch reaction, Heterocyclic chemistry, Knoevenagel condensation, Mannich reaction, Michael addition, Multi-component reactions... [Pg.227]

A vast array of piperidine containing cores, both natural and synthetic, are of biological and medicinal interest. These heterocyclic scaffolds have been the subjects of considerable synthetic efforts, especially for the construction of optically active compounds. In this context, Khan et al. reported a catalytic bromodi-methylsulfonium bromide (BDMS) three-component reaction of 1,3-dicarbonyls with aromatic aldehydes and aromatic amines for a facile access to highly functionalized piperidines (Scheme 24) [104]. This strategy is an interesting illustration of... [Pg.242]

This approach has been extended to cyclic 1,3-dicarbonyls for the synthesis of tetrahydrobenzopyrane derivatives, also known as tetrahydrochromenes, which have attracted much attention due to their wide range of biological properties. Thus, a mixture of an aromatic aldehyde, dimedone, and malonitrile in aqueous media catalyzed either by (5)-proline [123] or tetramethylammoniura hydroxide (TMAH) [124] gave the bicyclic heterocycle in excellent yields (Scheme 35). [Pg.249]

In its original form, the Michael addition consisted on the addition of diethyl malonate across the double bond of ethyl cinnamate in the presence of sodium ethoxide to afford a substituted pentanedioic acid ester. Currently, all reactions that involve a 1,4-addition of stabilized carbon nucleophiles to activated 7i-systems are known as Michael additions. Among the various reactants, enolates derived from p-dicarbonyl compounds are substrates of choice due to their easy deprotonation under mild conditions. Recently, Michael addition-based MCRs emerged as highly potential methodologies for the synthesis of polysubstituted heterocycles in the five- to seven-membered series. [Pg.256]

In 2008, Lhommet and co-workers, by extrapolation of a previously described polycyclic version [144], proposed the three-component condensation of acrolein, (5)-2-phenylglycinol, and various acyclic 1,3-dicarbonyls in toluene in the presence of 4 A molecular sieves for the preparation of chiral, bicyclic functionalized tetrahydropyridines (Scheme 50) [145]. These heterocycles may be used as chiral building blocks for the synthesis of alkaloids, as illustrated by the total enantiose-lective synthesis of (—)-lupinine in five steps and 29% overall yield. [Pg.258]


See other pages where Dicarbonyl heterocycles is mentioned: [Pg.319]    [Pg.820]    [Pg.537]    [Pg.303]    [Pg.151]    [Pg.179]    [Pg.62]    [Pg.12]    [Pg.14]    [Pg.240]    [Pg.100]    [Pg.317]    [Pg.251]    [Pg.206]    [Pg.311]    [Pg.74]    [Pg.387]    [Pg.63]    [Pg.227]    [Pg.229]    [Pg.245]    [Pg.253]    [Pg.261]   
See also in sourсe #XX -- [ Pg.7 , Pg.1186 ]




SEARCH



© 2024 chempedia.info