Coupled Plasma ICP Emission Spectrometry

Contamination of the analytes from the carriers (the precipitates) should be first examined, and the blank test carried out carefully. Great care should also be taken in terms of the recoveries of the analytes, because the procedures in the coprecipitation are sometimes time-consuming and irre-producible. Some efficiencies of recovery for Zr(IV) coprecipitation along with the determined values of trace elements in seawater are summarized in Table 7, where inductively-coupled plasma (ICP) emission spectrometry was applied for the simultaneous multielement analysis [45]. In this experiment, 10 mg of Zr(IV) was added to 11 of seawater, the precipitation made... 

Clinical measurements of lithium may be performed using atomic absorption spectrometry (AAS) or flame emission spectrometry (FES) 64). AAS is regarded as the more reliable of the two techniques for blood lithium. FES is rather more sensitive, but suffers from interference from the high sodium and potassium concentrations in blood. Recent developments include inductively coupled plasma (ICP) emission spectrometry, electrothermal atomization atomic absorption spectrometry (ETAAS), and spectrofluorimetric methods. Spectrofluorime-try and ETAAS offer greater sensitivity than the traditional methods and are useful research tools 65, 66). 

The LPR method as a technique for the preconcentration and separation of elements allows generally the development of hyphenated techniques. One example is the combination with the inductively coupled plasma (ICP) emission spectrometry. The general application of the LPR method for the LPR-ICP technique is illustrated in Figure 20. 

Figure 21. Principle of the polymer-based approach using LPR in conjunction witt the inductively coupled plasma (ICP) emission spectrometry to monitor drinking water.

Inductively coupled plasma (icp) emission, direct current plasma (dcp), and inductively coupled plasma mass spectrometry (icp/ms) have taken over as the methods of choice for the simultaneous detection of metallic impurities in hafnium and hafnium compounds (29,30). 

Pt content determined by inductively coupled plasma-atomic emission spectrometry (ICP-AES). Monolayer uptakes (P = 0) determined at 295 K. 

Magnesium deficiency has been long recognized, but hypermagnesia also occurs (Anderson and Talcott 1994). Magnesium can be determined in fluids by FAAS, inductively coupled plasma atomic emission spectrometry (ICP-AES) and ICP-MS. In tissue Mg can be determined directly by solid sampling atomic absorption spectrometry (SS-AAS) (Herber 1994a). Both Ca and Mg in plasma/serum are routinely determined by photometry in automated analyzers. 

Method abbreviations D-AT-FAAS (derivative flame AAS with atom trapping), ETAAS (electrothermal AAS), GC (gas chromatography), HGAAS (hydride generation AAS), HR-ICP-MS (high resolution inductively coupled plasma mass spectrometry), ICP-AES (inductively coupled plasma atomic emission spectrometry), ICP-MS (inductively coupled plasma mass spectrometry), TXRF (total reflection X-ray fluorescence spectrometry), Q-ICP-MS (quadrapole inductively coupled plasma mass spectrometry)... 

ASTM. 1998a. ASTME1613. Standard test method for analysis of digested samples for lead by inductively coupled plasma atomic emission spectrometry (ICP-AES). Flame Atomic Absorption (FAAS), or Graphite Furnace Atomic Absorption (GFAA) Techniques. American Society for Testing and Materials. 

Thiel G, Danzer K (1997) Direct analysis of mineral components in wine by inductively coupled plasma optical emission spectrometry (ICP-OES). Fresenius J Anal Chem 357 553... 

Inductively coupled plasma atomic emission spectrometry (ICP-AES) is used to screen polymers, liquids and solvent extracts for residual metal atoms (catalysts, fillers, etc.). The technique can provide rapid multi-component screening of elements in solution over a wide concentration range (0.1-1,000 pg/ml). 

Organogermanium compounds can be mineralized by wet oxidative digestion for 4 h at 70°C, in aqueous potassium persulphate, at pH 12. After dilution to an adequate concentration germanium can be determined by ICP-AES (inductively coupled plasma atomic emission spectrometry)9. 

Atomic techniques such as atomic absorption spectrometry (AA), inductively coupled plasma-optical emission spectrometry (ICP-OES), and inductively coupled plasma-mass spectrometry (ICP-MS), have been widely used in the pharmaceutical industry for metal analysis.190-192 A content uniformity analysis of a calcium salt API tablet formulation by ICP-AES exhibited significantly improved efficiency and fast analysis time (1 min per sample) compared to an HPLC method.193... 

Prior to analysis, solutions from seven-day T/D tests on cuprous oxide (Cu20) and nickel metal powder (Ni) were passed through a column with iminodiacetate functional groups using an ammonium acetate buffer. The alkali and alkali earth metals are not bound to the column thereby separating the cations associated with the saltwater matrix from the transition metals of interest which are subsequently eluted with nitric acid and analysed by ICP-AES (inductively-coupled plasma-atomic emission spectrometry). 

The samples were air-dried at room temperature, sieved to < 63 pm and analysed by x-ray diffraction (XRD) and scanning electron microscopy combined with an energy dispersive system (SEM-EDS). For chemical analysis, samples were submitted to an extraction with Aqua Regia and analysed by inductively coupled plasma-optical emission spectrometry (ICP/OES). Firing experiments were performed following the procedure described by Brindley Brown (1980). 

Perkin-Elmer ICP 5000 Can be used for flame and graphite furnace ASS and inductively coupled plasma atomic emission spectrometry (sequential) ... 

Table 5.2 Summary of selected analytical methods for molecular environmental geochemistry. AAS Atomic absorption spectroscopy AFM Atomic force microscopy (also known as SFM) CT Computerized tomography EDS Energy dispersive spectrometry. EELS Electron energy loss spectroscopy EM Electron microscopy EPR Electron paramagnetic resonance (also known as ESR) ESR Electron spin resonance (also known as EPR) EXAFS Extended X-ray absorption fine structure FUR Fourier transform infrared FIR-TEM Fligh-resolution transmission electron microscopy ICP-AES Inductively-coupled plasma atomic emission spectrometry ICP-MS Inductively-coupled plasma mass spectrometry. Reproduced by permission of American Geophysical Union. O Day PA (1999) Molecular environmental geochemistry. Rev Geophysics 37 249-274. Copyright 1999 American Geophysical Union...

Soil samples were wet sieved into (a) 2-4 mm, (b) 1-2 mm, (c) 0.5-1 mm, (d) 250-500 i m, (e) 125-250 am, (f) 63-125 j,m and (g) <63 j.m fractions. A ferruginous/magnetic fraction (m) was also prepared from the 2-4 mm fraction. Soil fractions were crushed, digested with HNO3/HCI/HF/HCIO4 and then analysed by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) for Al, Ca, Cu, Fe, K, Mn, Na, P, S and Zn. Inductively Coupled Plasma Mass Spectrometry (ICP-MS) was used to determine Ag, As, Cd, Pb and Sb because of the lower detection limits by this method. The mineralogy of selected samples was determined by qualitative X-ray diffractometry. 

Fluorescence (XRF) and Induced Coupled Plasma Atomic Emission Spectrometry (ICP-AES). The results of the analyses are shown in Tables 1 and 2, respectively. 

Chemical composition of fresh HTs was determined in a Perkin Elmer Mod. OPTIMA 3200 Dual Vision by inductively coupled plasma atomic emission spectrometry (ICP-AES). The crystalline structure of the solids was studied by X-ray diffraction (XRD) using a Siemens D-500 diffractometer equipped with a CuKa radiation source. The average crystal sizes were calculated from the (003) and (110) reflections employing the Debye-Scherrer equation. Textural properties of calcined HTs (at 500°C/4h) were analyzed by N2 adsorption-desorption isotherms on an AUTOSORB-I, prior to analysis the samples were outgassed in vacuum (10 Torr) at 300°C for 5 h. The specific surface areas were calculated by using the Brunauer-... 

Inductively coupled plasma atomic emission spectrometry. See ICP-AES... 

Internal standards are also used in trace metal analysis by inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS) techniques. An internal standard solution is added to ICP-MS and ICP-AES samples to correct for matrix effects, and the response to the internal standard serves as a correction factor for all other analytes (see also chapter 2). 

S. Aguerre, C. Pecheyran and G. Lespes, Validation, using a chemometric approach, of gas chromatography-inductively coupled plasma-atomic emission spectrometry (GC-ICP-AES) for organotin determination, Anal. Bioanal. Chem., 376(2), 2003, 226-235. 

F. J. Copa-Rodriguez and M. I. Basadre-Pampin, Determination of iron, copper and zinc in tinned mussels by inductively coupled plasma atomic emission spectrometry (ICP-AES), Fresenius J. Anal. Chem., 348(5-6), 1994, 390-395. 

Inductively coupled plasma (ICP) needs careful extraction of the relevant information to obtain satisfactory models and several chemometric studies were found. Indeed, many ICP spectroscopists have applied multivariate regression and other multivariate methods to a number of problems. An excellent review has recently been published on chemometric modelling and applications of inductively coupled plasma optical emission spectrometry (ICP-OES) [79]. 

An ANN was used by Magallanes et al. [66] to optimise hydride generation-inductively coupled plasma atomic emission spectrometry (HG-ICP-AES) coupling for the determination of Ge at trace levels. 

The particulate material from the sediment traps was digested in aqua regia in a microwave digestion unit. Fe, Mn, Zn, Ca, Cr, and Cu were determined by inductively coupled plasma atomic emission spectrometry (ICP-AES) P was determined by the molybdate spectrophotometric method (28). A sediment standard (NBS No. 1645) was used regularly to check the accuracy of the sediment digestion procedure. 

---