Composites classifying

Figure 14.1 Composites classified according to reinforcement types.

The standard NF T 65-004 classifies the types of composite bitumen it distinguishes three grades of bitumen-tars by their pseudo-viscosities and two grades of bitumen-coal tar pitch by their penetrabilities. 

The performance of the classifier has been verified using a number of practical applications, such as civil engineering [3], inspection of aerospace composite structures, ball bearings and aircraft multi-layer structures. Here we present shortly some results, focusing on detection of disbonds in adhesively joint multi-layer aerospace structures using Fokker Bond Tester resonance instrument, details can be found in [1]. 

We have presented a neural network based spectrum classifier (NSC) aimed at ultrasonic resonance spectroscopy. The ultrasonic spectroscopy and the NSC has been evaluated in many industrial applications, such as concrete inspection, testing of aerospace composite structures, ball bearings, and aircraft multi-layer structures. The latter application has been presented in some detail. 

Principal Adsorbent Types. Commercially useful adsorbents can be classified by the nature of their stmcture (amorphous or crystalline), by the sizes of their pores (micropores, mesopores, and macropores), by the nature of their surfaces (polar, nonpolar, or intermediate), or by their chemical composition. AH of these characteristics are important in the selection of the best adsorbent for any particular appHcation. 

Percentage of meteorites seen to fall. Chondrites. Over 90% of meteorites that are observed to fall out of the sky are classified as chondrites, samples that are distinguished from terrestrial rocks in many ways (3). One of the most fundamental is age. Like most meteorites, chondrites have formation ages close to 4.55 Gyr. Elemental composition is also a property that distinguishes chondrites from all other terrestrial and extraterrestrial samples. Chondrites basically have undifferentiated elemental compositions for most nonvolatile elements and match solar abundances except for moderately volatile elements. The most compositionaHy primitive chondrites are members of the type 1 carbonaceous (Cl) class. The analyses of the small number of existing samples of this rare class most closely match estimates of solar compositions (5) and in fact are primary source solar or cosmic abundances data for the elements that cannot be accurately determined by analysis of lines in the solar spectmm (Table 2). Table 2. Solar System Abundances of the Elements ... 

AH commercial as well as most experimental glass-ceramics are based on siUcate bulk glass compositions. Glass-ceramics can be further classified by the composition of thek primary crystalline phases, which may consist of siUcates, oxides, phosphates, or borates. 

Hlkanolamides. The fatty acid alkanolamides are used widely ia shampoo formulations as viscosity and lather builders. They are formed by the condensation of a fatty acid with a primary or secondary alkanolamine. The early amides were compositions of 2 1 alkanolamine to fatty acid. Available technology allows the formation of amides with a 1 1 ratio of these additives. These amides are classified as superamide types. The typical amide used ia shampoo preparations usually contains the mono- or diethanolamine adduct, eg, lauric diethanolamide [120-40-1] (see Amides, fatty acid). 

Medicated Dandruff Shampoos. Dandmff is a scalp condition characterized by the production of excessive cellular material (18). A number of shampoos have been marketed which are designed to control and alleviate this condition, and many additives have been included in shampoo compositions to classify them as treatment products for dandmff. These additives include antimicrobial additives, eg, quaternary ammonium salts keratolytic agents, eg, saUcychc acid and sulfur heavy metals, eg, cadmium sulfide coal tar resorcinol and many others. More recent (ca 1993) systems use selenium sulfide [7488-56-4] or zinc pyrithione [13463-41 -7] as active antidandmff shampoo additives. Both of these additives are classified as dmgs, but can be found in over-the-counter products. A stronger version, incorporating the use of higher levels of selenium sulfide in a shampoo, is available but requires a prescription for purchase. 

The wide range of soHd lubricants can generally be classified as either inorganic compounds or organic polymers, both commonly used in a bonded coating on a matching substrate, plus chemical conversion coatings and metal films. Since solid-film lubricants often suffer from poor wear resistance and inabihty to self-heal any breaks in the film, search continues for improved compositions. 

Friction Materials. Sintered friction materials are classified as metal— nonmetal combinations (49,50). These are best manufactured by the P/M process. Clutch plates, brake bands, brake blocks, and packing compositions are examples of friction materials (see Brake linings and clutch facings). 

Drilling fluids are classified as to the nature of the continuous phase gas, water, oil, or synthetic. Within each classification are divisions based on composition or chemistry of the fluid or the dispersed phase. 

With few exceptions, extender pigments can be classified as commodity chemicals. They are manufactured in large quantities with less sophisticated production methods than most pigments. Whereas the majority of pigments is prepared synthetically, extender pigments are mainly manufactured by the beneficiation of natural minerals. Based on chemical composition, extender pigments are carbonate, sulfate, siUca-based, and siUcate-based compounds. 

In order to operate a process facility in a safe and efficient manner, it is essential to be able to control the process at a desired state or sequence of states. This goal is usually achieved by implementing control strategies on a broad array of hardware and software. The state of a process is characterized by specific values for a relevant set of variables, eg, temperatures, flows, pressures, compositions, etc. Both external and internal conditions, classified as uncontrollable or controllable, affect the state. Controllable conditions may be further classified as controlled, manipulated, or not controlled. Excellent overviews of the basic concepts of process control are available (1 6). 

Refrigerant mixtures are divided into two categories, azeotropes and zeotropes. The 500-series refrigerants are classified as azeotropes, since the vapor composition is identical to the Hquid composition at a given pressure. The 400-series refrigerants are classified as zeotropes, because the equiUbrium... 

A classification by chemical type is given ia Table 1. It does not attempt to be either rigorous or complete. Clearly, some materials could appear ia more than one of these classifications, eg, polyethylene waxes [9002-88 ] can be classified ia both synthetic waxes and polyolefins, and fiuorosihcones ia sihcones and fiuoropolymers. The broad classes of release materials available are given ia the chemical class column, the principal types ia the chemical subdivision column, and one or two important selections ia the specific examples column. Many commercial products are difficult to place ia any classification scheme. Some are of proprietary composition and many are mixtures. For example, metallic soaps are often used ia combination with hydrocarbon waxes to produce finely dispersed suspensions. Many products also contain formulating aids such as solvents, emulsifiers, and biocides. 

---