Cobalt special

In xylene with 6-10% cobalt Special for large batches or high usage can be diluted performance as for above A,B,C,D,e, f.g... 

Cobalt is a bluish silvery metal, exhibits ferromagnetism, and can exist in more than one crystal form it is used in alloys for special purposes. Chemically it is somewhat similar to iron when heated in air it gives the oxides C03O4 and CoO, but it is less readily attacked by dilute acids. With halogens, the cobalt(II) halides are formed, except that with fluorine the (III) fluoride, C0F3, is obtained. 

Common catalyst compositions contain oxides or ionic forms of platinum, nickel, copper, cobalt, or palladium which are often present as mixtures of more than one metal. Metal hydrides, such as lithium aluminum hydride [16853-85-3] or sodium borohydride [16940-66-2] can also be used to reduce aldehydes. Depending on additional functionahties that may be present in the aldehyde molecule, specialized reducing reagents such as trimethoxyalurninum hydride or alkylboranes (less reactive and more selective) may be used. Other less industrially significant reduction procedures such as the Clemmensen reduction or the modified Wolff-Kishner reduction exist as well. 

Butane LPO conducted in the presence of very high concentrations of cobalt catalyst has been reported to have special character (2,205,217—219). It occurs under mild conditions with reportedly high efficiency to acetic acid. It is postulated to involve the direct attack of Co(III) on the substrate. Various additives, including methyl ethyl ketone, -xylene, or water, are claimed to be useful. 

Reduction of sulfur dioxide by methane is the basis of an Allied process for converting by-product sulfur dioxide to sulfur (232). The reaction is carried out in the gas phase over a catalyst. Reduction of sulfur dioxide to sulfur by carbon in the form of coal has been developed as the Resox process (233). The reduction, which is conducted at 550—800°C, appears to be promoted by the simultaneous reaction of the coal with steam. The reduction of sulfur dioxide by carbon monoxide tends to give carbonyl sulfide [463-58-1] rather than sulfur over cobalt molybdate, but special catalysts, eg, lanthanum titanate, have the abiUty to direct the reaction toward producing sulfur (234). 

Color. Many water samples have a yellow to brownish-yeUow color which is caused by natural substances, eg, leaves, bark, humus, and peat material. Turbidity in a sample can make the measurement of color uncertain and is usually removed by centrifiigation prior to analysis. The color is usually measured by comparison of the sample with known concentrations of colored solutions. A platinum—cobalt solution is used as the standard, and the unit of color is that produced by 1 mg/L platinum as chloroplatinate ion. The standard is prepared from potassium chloroplatinate (K PtCl ) and cobalt chloride (C0CI26H2O). The sample may also be compared to suitably caUbrated special glass color disks. 

Meta.1 Complex Dyes. Metals such as chromium and cobalt can be iatroduced iato dye molecules to give larger molecules. They can be regarded as being a special form of mordant dye. The complexes can be formed by chelating one or two molecules of dye with metal. They are appHed ia a similar manner to acid dyes. 

Electroplated Metals and Alloys. The metals electroplated on a commercial scale from specially formulated aqueous solutions iaclude cadmium, chromium, cobalt, copper, gold, iadium, iron, lead, nickel, platinum-group metals, silver, tin, and ziac. Although it is possible to electroplate some metals, such as aluminum, from nonaqueous solutions as well as some from molten salt baths, these processes appear to have achieved Httie commercial significance. 

Fire Hazards - Flash Point Not flammable Flammable Limits in Air (%) Not flammable Fire Extinguishing Agents Not pertinent Fire Extinguishing Agents Not To Be Used Not pertinent Special Hazards of Combustion Products Toxic cobalt oxide fumes form during fires Behavior in Fire No data Ignition Temperature Not pertinent Electrical Hazard Not pertinent Burning Rate Not pertinent. 

Reduction of unsaturated aldehydes seems more influenced by the catalyst than is that of unsaturated ketones, probably because of the less hindered nature of the aldehydic function. A variety of special catalysts, such as unsupported (96), or supported (SJ) platinum-iron-zinc, plalinum-nickel-iron (47), platinum-cobalt (90), nickel-cobalt-iron (42-44), osmium (<55), rhenium heptoxide (74), or iridium-on-carbon (49), have been developed for selective hydrogenation of the carbonyl group in unsaturated aldehydes. None of these catalysts appears to reduce an a,/3-unsaturated ketonic carbonyl selectively. 

Numerous proprietary electrolytes have been developed for the production of harder and brighter deposits. These include acid, neutral and alkaline solutions and cyanide-free formulations and the coatings produced may be essentially pure, where maximum electrical conductivity is required, or alloyed with various amounts of other precious or base metals, e.g. silver, copper, nickel, cobalt, indium, to develop special physical characteristics. 

A special kind of oxidative addition occurs between phosphine cobalt hydride complexes and boron halides ... 

Some of the transition metal macrocycles adsorbed on electrode surfaces are of special Interest because of their high catalytic activity for dloxygen reduction. The Interaction of the adsorbed macrocycles with the substrate and their orientation are of Importance In understanding the factors controlling their catalytic activity. In situ spectroscopic techniques which have been used to examine these electrocatalytlc layers Include visible reflectance spectroscopy surface enhanced and resonant Raman and Mossbauer effect spectroscopy. This paper Is focused principally on the cobalt and Iron phthalocyanlnes on silver and carbon electrode substrates. 

Of special Interest as O2 reduction electrocatalysts are the transition metal macrocycles In the form of layers adsorptlvely attached, chemically bonded or simply physically deposited on an electrode substrate Some of these complexes catalyze the 4-electron reduction of O2 to H2O or 0H while others catalyze principally the 2-electron reduction to the peroxide and/or the peroxide elimination reactions. Various situ spectroscopic techniques have been used to examine the state of these transition metal macrocycle layers on carbon, graphite and metal substrates under various electrochemical conditions. These techniques have Included (a) visible reflectance spectroscopy (b) laser Raman spectroscopy, utilizing surface enhanced Raman scattering and resonant Raman and (c) Mossbauer spectroscopy. This paper will focus on principally the cobalt and Iron phthalocyanlnes and porphyrins. 

A current area of interest is the use of AB cements as devices for the controlled release of biologically active species (Allen et al, 1984). AB cements can be formulated to be degradable and to release bioactive elements when placed in appropriate environments. These elements can be incorporated into the cement matrix as either the cation or the anion cement former. Special copper/cobalt phosphates/selenates have been prepared which, when placed as boluses in the rumens of cattle and sheep, have the ability to decompose and release the essential trace elements copper, cobalt and selenium in a sustained fashion over many months (Chapter 6). Although practical examples are confined to phosphate cements, others are known which are based on a variety of anions polyacrylate (Chapter 5), oxychlorides and oxysulphates (Chapter 7) and a variety of organic chelating anions (Chapter 9). The number of cements available for this purpose is very great. 

---