Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Chromium peroxide

Addition of dilute potassium dichromate(VI) solution, K2Cr207, to a solution of hydrogen peroxide produces chromium peroxide, CrOj, as an unstable blue coloration on adding a little ether and shaking this compound transfers to the organic layer in which it is rather more stable. [Pg.281]

Oxidation of 2-deoxyglycosides with the chromium peroxide-pyridine... [Pg.266]

Chromium Peroxide Compounds. Add a little of a dilute sulphu-... [Pg.218]

Chromium peroxide (CrOs), obtained by the oxidation of chromium trioxide with hydrogen peroxide, reacts with amines forming complexes, like 2,2 -bipyridylchromium (BPCP) and pyridinechromium (PCP) peroxides, that oxidize efficiently alcohols to aldehydes and ketones 426b... [Pg.91]

Because of the two peroxide groups the compound is often called chromium peroxide. The name peroxochromic acid is less appropriate, because the compound does not contain hydrogen at all. In aqueous solution the blue colour fades rapidly, because chromium pentoxide decomposes to chromium(III) and oxygen ... [Pg.257]

Like other transition metals, notably Ti, V, Nb, Ta, Mo and W, chromium forms peroxo compounds in the higher oxidation states. They are all more or less unstable, both in and out of solution, decomposing slowly with the evolution of oxygen, and some of them are explosive or flammable in air. The main ones are the adducts of the deep blue chromium peroxide, CrOs, the violet peroxochromates, the red peroxochromates, and the addition compounds of Cr04. [Pg.841]

The chromates of the alkali metals and of magnesium and calcium are soluble in water the other chromates are insoluble. The chromate ion is yellow, but some insoluble chromates are red (for example silver chromate, Ag2Cr04). Chromates are often isomorph-ous with sulphates, which suggests that the chromate ion, CrO has a tetrahedral structure similar to that of the sulphate ion, SO4 Chromates may be prepared by oxidising chromium(III) salts the oxidation can be carried out by fusion with sodium peroxide, or by adding sodium peroxide to a solution of the chromium(IIl) salt. The use of sodium peroxide ensures an alkaline solution otherwise, under acid conditions, the chromate ion is converted into the orange-coloured dichromate ion ... [Pg.378]

Acetic acid Chromium(VI) oxide, chlorosulfonic acid, ethylene glycol, ethyleneimine, hydroxyl compounds, nitric acid, oleum, perchloric acid, peroxides, permanganates, potasssium r rf-butoxide, PCI3... [Pg.1207]

Ammonia, anhydrous Mercury, halogens, hypochlorites, chlorites, chlorine(I) oxide, hydrofluoric acid (anhydrous), hydrogen peroxide, chromium(VI) oxide, nitrogen dioxide, chromyl(VI) chloride, sulflnyl chloride, magnesium perchlorate, peroxodisul-fates, phosphorus pentoxide, acetaldehyde, ethylene oxide, acrolein, gold(III) chloride... [Pg.1207]

Ethyl ether Eiquid air, chlorine, chromium(VI) oxide, lithium aluminum hydride, ozone, perchloric acid, peroxides... [Pg.1208]

Glycerol Acetic anhydride, hypochlorites, chromium(VI) oxide, perchlorates, alkali peroxides, sodium hydride... [Pg.1208]

Hydrogen peroxide Copper, chromium, iron, most metals or their salts, alcohols, acetone, organic materials, flammable liquids, combustible materials... [Pg.1208]

Butane-Naphtha Catalytic Liquid-Phase Oxidation. Direct Hquid-phase oxidation ofbutane and/or naphtha [8030-30-6] was once the most favored worldwide route to acetic acid because of the low cost of these hydrocarbons. Butane [106-97-8] in the presence of metallic ions, eg, cobalt, chromium, or manganese, undergoes simple air oxidation in acetic acid solvent (48). The peroxidic intermediates are decomposed by high temperature, by mechanical agitation, and by action of the metallic catalysts, to form acetic acid and a comparatively small suite of other compounds (49). Ethyl acetate and butanone are produced, and the process can be altered to provide larger quantities of these valuable materials. Ethanol is thought to be an important intermediate (50) acetone forms through a minor pathway from isobutane present in the hydrocarbon feed. Formic acid, propionic acid, and minor quantities of butyric acid are also formed. [Pg.68]

Make acid yields coumaUc acid when treated with fuming sulfuric acid (19). Similar treatment of malic acid in the presence of phenol and substituted phenols is a facile method of synthesi2ing coumarins that are substituted in the aromatic nucleus (20,21) (see Coumarin). Similar reactions take place with thiophenol and substituted thiophenols, yielding, among other compounds, a red dye (22) (see Dyes and dye intermediates). Oxidation of an aqueous solution of malic acid with hydrogen peroxide (qv) cataly2ed by ferrous ions yields oxalacetic acid (23). If this oxidation is performed in the presence of chromium, ferric, or titanium ions, or mixtures of these, the product is tartaric acid (24). Chlorals react with malic acid in the presence of sulfuric acid or other acidic catalysts to produce 4-ketodioxolones (25,26). [Pg.522]

Chromium (ITT) can be analy2ed to a lower limit of 5 x 10 ° M by luminol—hydrogen peroxide without separating from other metals. Ethylenediaminetetraacetic acid (EDTA) is added to deactivate most interferences. Chromium (ITT) itself is deactivated slowly by complexation with EDTA measurement of the sample after Cr(III) deactivation is complete provides a blank which can be subtracted to eliminate interference from such ions as iron(II), inon(III), and cobalt(II), which are not sufficiently deactivated by EDTA (275). [Pg.274]

Chromium oxide is mixed with aluminum powder, placed in a refractory-lined vessel, and ignited with barium peroxide and magnesium powder. The reaction is exothermic and self-sustaining. Chromium metal of 97—99% purity is obtained, the chief impurities being aluminum, iron, and silicon (Table 4). Commercial chromium metal may also be produced from the oxide by reduction with silicon in an electric-arc furnace. [Pg.116]

Ghromium(III) Compounds. Chromium (ITT) is the most stable and most important oxidation state of the element. The E° values (Table 2) show that both the oxidation of Cr(II) to Cr(III) and the reduction of Cr(VI) to Cr(III) are favored in acidic aqueous solutions. The preparation of trivalent chromium compounds from either state presents few difficulties and does not require special conditions. In basic solutions, the oxidation of Cr(II) to Cr(III) is still favored. However, the oxidation of Cr(III) to Cr(VI) by oxidants such as peroxides and hypohaUtes occurs with ease. The preparation of Cr(III) from Cr(VI) ia basic solutions requires the use of powerful reducing agents such as hydra2ine, hydrosulfite, and borohydrides, but Fe(II), thiosulfate, and sugars can be employed in acid solution. Cr(III) compounds having identical counterions but very different chemical and physical properties can be produced by controlling the conditions of synthesis. [Pg.135]

When hydrogen peroxide is added to an acid solution of Cr(VI), a deep blue color, iadicating the formation of chromium (VI) oxide diperoxide [35262-77-2] is observed. This compound is metastable and rapidly decomposes to Cr(III) and oxygen at room temperature. The reaction... [Pg.137]

Wet-Chemical Determinations. Both water-soluble and prepared insoluble samples must be treated to ensure that all the chromium is present as Cr(VI). For water-soluble Cr(III) compounds, the oxidation is easily accompHshed using dilute sodium hydroxide, dilute hydrogen peroxide, and heat. Any excess peroxide can be destroyed by adding a catalyst and boiling the alkaline solution for a short time (101). Appropriate ahquot portions of the samples are acidified and chromium is found by titration either using a standard ferrous solution or a standard thiosulfate solution after addition of potassium iodide to generate an iodine equivalent. The ferrous endpoint is found either potentiometricaHy or by visual indicators, such as ferroin, a complex of iron(II) and o-phenanthroline, and the thiosulfate endpoint is ascertained using starch as an indicator. [Pg.141]

The final solution should be checked for absence of free cyanide. The hypochlorite or CI2 + NaOH method is by far the most widely used commercially (45). However, other methods are oxidation to cyanate using hydrogen peroxide, o2one, permanganate, or chlorite electrolysis to CO2, NH, and cyanate hydrolysis at elevated temperatures to NH and salts of formic acid air or steam stripping at low pH biological decomposition to CO2 and N2 chromium... [Pg.380]

Concentration Effects. The reactivity of ethyl alcohol—water mixtures has been correlated with three distinct alcohol concentration ranges (35,36). For example, the chromium trioxide oxidation of ethyl alcohol (37), the catalytic decomposition of hydrogen peroxide (38), and the sensitivities of coUoidal particles to coagulation (39) are characteristic for ethyl alcohol concentrations of 25—30%, 40—60%, and above 60% alcohol, respectively. The effect of various catalysts also differs for different alcohol concentrations (35). [Pg.403]

Again, as with pyridopyrimidines, the main reaction is oxidation of di- or poly-hydro derivatives to fully aromatic structures, often merely by air or oxygen. In some cases the reagent of choice is mercury(II) oxide, whilst other reagents used include sulfur, bromine, chloranil, chromium trioxide-acetic acid, hydrogen peroxide, and potassium ferricyanide, which also caused oxidative removal of a benzyl group in the transformation (306) (307)... [Pg.237]

Ammonia can also react violently with a large selection of chemicals including ethylene oxide, halogens, heavy metals, and oxidants such as chromium trioxide, dichlorine oxide, dinitrogen tetroxide, hydrogen peroxide, nitric acid, liquid oxygen, and potassium chlorate. [Pg.276]

Chromium plating from hexavalent baths is carried out with insoluble lead-lead peroxide anodes, since chromium anodes would be insoluble (passive). There are three main anode reactions oxidation of water, reoxidation of Cr ions (or more probably complex polychromate compounds) produced at the cathode and gradual thickening of the PbOj film. The anode current density must balance the reduction and reoxidation of trivalent chromium so that the concentration reaches a steady state. From time to time the PbOj film is removed as it increases electrical resistance. [Pg.349]


See other pages where Chromium peroxide is mentioned: [Pg.263]    [Pg.383]    [Pg.257]    [Pg.383]    [Pg.140]    [Pg.141]    [Pg.43]    [Pg.6528]    [Pg.203]    [Pg.125]    [Pg.59]    [Pg.22]    [Pg.263]    [Pg.383]    [Pg.257]    [Pg.383]    [Pg.140]    [Pg.141]    [Pg.43]    [Pg.6528]    [Pg.203]    [Pg.125]    [Pg.59]    [Pg.22]    [Pg.274]    [Pg.1208]    [Pg.377]    [Pg.141]    [Pg.57]    [Pg.149]    [Pg.971]    [Pg.70]    [Pg.546]    [Pg.731]    [Pg.696]   


SEARCH



© 2024 chempedia.info