Chromium compounds peroxides

Ghromium(III) Compounds. Chromium (ITT) is the most stable and most important oxidation state of the element. The E° values (Table 2) show that both the oxidation of Cr(II) to Cr(III) and the reduction of Cr(VI) to Cr(III) are favored in acidic aqueous solutions. The preparation of trivalent chromium compounds from either state presents few difficulties and does not require special conditions. In basic solutions, the oxidation of Cr(II) to Cr(III) is still favored. However, the oxidation of Cr(III) to Cr(VI) by oxidants such as peroxides and hypohaUtes occurs with ease. The preparation of Cr(III) from Cr(VI) ia basic solutions requires the use of powerful reducing agents such as hydra2ine, hydrosulfite, and borohydrides, but Fe(II), thiosulfate, and sugars can be employed in acid solution. Cr(III) compounds having identical counterions but very different chemical and physical properties can be produced by controlling the conditions of synthesis. 

Preuss HG, Grojec PL, Lieberman S, et al. 1997. Effects of different chromium compounds on blood pressure and lipid peroxidation in spontaneously hypertensive rats. Clin Nephrol 47(5) 325-330. 

Ueno S, Susa N, Furukawa Y, et al. 1988. The relationship between the development of toxicity and lipid peroxidation induced by chromium compounds in rats. Kitasato Arch of Exp Med 61 137-147. 

CL 0.05 mg/mVl5M SAFETY PROFILE Confirmed human carcinogen. Explodes when heated to 115°C. When heated to decomposition it emits toxic fumes of Na20. See also CHROMIUM COMPOUNDS and PEROXIDES. 

If a trace of chromate or diehromate be heated in an opaque bead of fusion mixture on a platinum wire, a yellow bead results a chromium salt will give the same result if the bead is touched with a minute quantity of sodium peroxide. When heated with borax on platinum wire in an oxidising flame, chromium compounds impart to the bead a yellow or dark red colour, which on cooling becomes yellowish green if heated in the reducing flame an emerald green bead is obtained. 

Estimation of Chromium.—In the analysis of chromites or of other substances containing chromium, such as leather ashes, pigments, etc., it is first necessary to obtain a solution. This is done by finely powdering the substance and heating it with a suitable flux in a crucible, preferably of nickel. Many fluxes have been employed, usually caustic alkali or alkali carbonates, but the one in most common use at present is sodium peroxide, whereby the chromium compound is rapidly converted to a chromate. - Excess of alkali is removed by boiling with ammonium carbonate, which also precipitates any iron present. The filtrate is then acidified with dilute sulphuric acid and the chromium estimated either by gravimetric or volumetric methods. 

Alkenes can be oxidized to ketones of the same chain length by using salts of copper, palladium, and mercury as catalysts and air, electrolysis [120], hydrogen peroxide, or chromium compounds as oxidants [60, 65, 140, 565] (equation 90). 

DIEXHYLENE GLYCOL METHYL ETHER ACETATE (629-38-9) Combustible liquid (flash point 180°F/98°C). Moisture may cause decomposition with formation of acetic acid. Reacts violently with strong oxidizers, permanganates, peroxides, ammonium persulfate, bromine dioxide, calcium chlorate, chlorosulfonic acid, oleum, sulfuric acid, nitric acid, perchloric acid, and other strong acids. Incompatible with acyl halides, aliphatic amines, alkalis, boranes, isocyanates, nitrates. May form shock-sensitive mixtures with silver, cobalt, chlorinated hydrocarbons, nitromethane, chromium compounds. Attacks some plastics, rubber, and coatings. Attacks copper, brass, zinc. 

Chromium compounds catalyze the oxidation of indigocarmine (indigo-disulfonic acid) by hydrogen peroxide. The addition of 2,2 -dipyridyl increases the sensitivity of the reaction. This behavior forms the basis of a very sensitive test for hexavalent chromium. 

Addition of dilute potassium dichromate(VI) solution, K2Cr207, to a solution of hydrogen peroxide produces chromium peroxide, CrOj, as an unstable blue coloration on adding a little ether and shaking this compound transfers to the organic layer in which it is rather more stable. 

Acetic acid Chromium(VI) oxide, chlorosulfonic acid, ethylene glycol, ethyleneimine, hydroxyl compounds, nitric acid, oleum, perchloric acid, peroxides, permanganates, potasssium r rf-butoxide, PCI3... 

Butane-Naphtha Catalytic Liquid-Phase Oxidation. Direct Hquid-phase oxidation ofbutane and/or naphtha [8030-30-6] was once the most favored worldwide route to acetic acid because of the low cost of these hydrocarbons. Butane [106-97-8] in the presence of metallic ions, eg, cobalt, chromium, or manganese, undergoes simple air oxidation in acetic acid solvent (48). The peroxidic intermediates are decomposed by high temperature, by mechanical agitation, and by action of the metallic catalysts, to form acetic acid and a comparatively small suite of other compounds (49). Ethyl acetate and butanone are produced, and the process can be altered to provide larger quantities of these valuable materials. Ethanol is thought to be an important intermediate (50) acetone forms through a minor pathway from isobutane present in the hydrocarbon feed. Formic acid, propionic acid, and minor quantities of butyric acid are also formed. 

Make acid yields coumaUc acid when treated with fuming sulfuric acid (19). Similar treatment of malic acid in the presence of phenol and substituted phenols is a facile method of synthesi2ing coumarins that are substituted in the aromatic nucleus (20,21) (see Coumarin). Similar reactions take place with thiophenol and substituted thiophenols, yielding, among other compounds, a red dye (22) (see Dyes and dye intermediates). Oxidation of an aqueous solution of malic acid with hydrogen peroxide (qv) cataly2ed by ferrous ions yields oxalacetic acid (23). If this oxidation is performed in the presence of chromium, ferric, or titanium ions, or mixtures of these, the product is tartaric acid (24). Chlorals react with malic acid in the presence of sulfuric acid or other acidic catalysts to produce 4-ketodioxolones (25,26). 

When hydrogen peroxide is added to an acid solution of Cr(VI), a deep blue color, iadicating the formation of chromium (VI) oxide diperoxide [35262-77-2] is observed. This compound is metastable and rapidly decomposes to Cr(III) and oxygen at room temperature. The reaction... 

Wet-Chemical Determinations. Both water-soluble and prepared insoluble samples must be treated to ensure that all the chromium is present as Cr(VI). For water-soluble Cr(III) compounds, the oxidation is easily accompHshed using dilute sodium hydroxide, dilute hydrogen peroxide, and heat. Any excess peroxide can be destroyed by adding a catalyst and boiling the alkaline solution for a short time (101). Appropriate ahquot portions of the samples are acidified and chromium is found by titration either using a standard ferrous solution or a standard thiosulfate solution after addition of potassium iodide to generate an iodine equivalent. The ferrous endpoint is found either potentiometricaHy or by visual indicators, such as ferroin, a complex of iron(II) and o-phenanthroline, and the thiosulfate endpoint is ascertained using starch as an indicator. 

Chromium plating from hexavalent baths is carried out with insoluble lead-lead peroxide anodes, since chromium anodes would be insoluble (passive). There are three main anode reactions oxidation of water, reoxidation of Cr ions (or more probably complex polychromate compounds) produced at the cathode and gradual thickening of the PbOj film. The anode current density must balance the reduction and reoxidation of trivalent chromium so that the concentration reaches a steady state. From time to time the PbOj film is removed as it increases electrical resistance. 

This is an alternative method of introducing copper into an o-hydroxyazo dye structure. The azo compound is treated with a copper(II) salt and an oxidant in an aqueous medium at 40-70 °C and pH 4.5-7.0. Sodium peroxide, sodium perborate, hydrogen peroxide or other salts of peroxy acids may be used as oxidants, the function of which is to introduce a second hydroxy group in the o -position [25]. This process is reminiscent of earlier work on Cl Acid Red 14 (5.51 X = H), an o-hydroxyazo dye that will not react with a chromium (III) salt to form a 1 1 complex but will do so by oxidation with an acidified dichromate solution. This oxidation product was later found to be identical with that obtained by conventional reaction of Cl Mordant Black 3 (5.51 X = OH) with a chromium(III) salt [7]. 

---