Hydrogen containing

Improved spectroscopic methods showed that the spectrum of hydrogen contained many more lines than was originally supposed and that some of these lines were split further into yet more lines when... 

Any hydrogen contained within the chlorine from the electroly2er is concentrated in the residual gas from the Hquefaction process and must not be allowed to exceed the explosive concentration limit of 5%. Although hydrogen concentration can be controUed by adding dry air to the process. 

Electrochemical fluorination leads to fragmentation, coupling, and rearrangement reactions as well as giving the perfluorinated product. In addition, small amounts of hydrogen can be retained in the cmde product. The products are purified by treatment with base to remove the hydrogen-containing species and subsequently distilled. 

Normal hydrogen contains ca 3 1 ratio of ortho- to j t rt -hydrogen. See text. 

Inorganic monomers can be used to plasma-deposit polymer-type films (16). At high plasma energies, the monomers are largely decomposed and can be used to form materials such as amorphous hydrogen-containing siUcon films from SiH for thin-film solar-ceU materials. 

The hydrogen contained in coke bums at a higher rate than carbon. Hydrogen-burning rates are four to five times greater than carbon-burning rates. 

Deuterium [16873-17-9] (symbol or D) occurs ia nature in all hydrogen-containing compounds to the extent of about 0.0145 atom %. Small but real... 

Specialty Epoxy Resins. In addition to bisphenol, other polyols such as aUphatic glycols and novolaks are used to produce specialty resins. Epoxy resins may also include compounds based on aUphatic, cycloaUphatic, aromatic, and heterocycHc backbones. Glycidylation of active hydrogen-containing stmctures with epichlorohydrin and epoxidation of olefins with peracetic acid remain the important commercial procedures for introducing the oxirane group into various precursors of epoxy resins. 

Hydrogenation of Acetaldehyde. Acetaldehyde made from acetylene can be hydrogenated to ethanol with the aid of a supported nickel catalyst at 150°C (156). A large excess of hydrogen containing 0.3% of oxygen is recommended to reduce the formation of ethyl ether. Anhydrous ethanol has also been made by hydrogenating acetaldehyde over a copper-on-pumice catalyst (157). 

Hydrogen-Containing Carbons from Pyrolyzcd Organic Precursors... 

The cycle life of the hydrogen-containing samples also appears to be limited as shown in ref 8. This is unacceptable for a practical application. The capacity loss is mostly due to the elimination of the excess capacity which exhibits hysteresis. Since this portion of the capacity appears related to the incorporated hydrogen, its elimination with cycling may not be unexpected. We do not understand this point fully yet, and further work would appear to be warranted. 

Fig. 23. When lithium inserts in hydrogen-containing carbon, some lithium atoms bind on the hydrogen-terminated edges of hexagonal carbon fragments. This causes a change from sp to sp bonding [37].

Hydrogen-Containing Carbons from Pyrolyzed Organic Precursors 358... 

The depropanizer overhead, Cj and lighter feed is compressed to about 300 psi and then passed over a fixed bed of acetylene removal catalyst, generally palladium on alumina. Because of the very large amount of hydrogen contained in this stream, the operating conditions are critical to selectively hydrogenate the acetylene without degrading the valuable ethylene to ethane. 

Hydrogen as it occurs in nature is predominantly composed of atoms in which the nucleus is a single proton. In addition, terrestrial hydrogen contains about 0.0156% of deuterium atoms in which the nucleus also contains a neutron, and this is the reason for its variable atomic weight (p. 17). Addition of a second neutron induces instability and tritium is radioactive, emitting low-energy particles with a half-life of 12.33 y. Some characteristic properties of these 3 atoms are given in Table 3.1, and their implications for stable isotope studies, radioactive tracer studies, and nmr spectroscopy are obvious. 

Most physical properties are but little affected by nuclear-spin isomerism though the thermal conductivity of P-H2 is more than 50% greater than that of 0-H2, and this forms a ready means of analysing mixtures. The mp of P-H2 (containing only 0.21% (3-H2) is 0.15 K below that of normal hydrogen (containing 75% 0-H2), and by extrapolation the mp of (unobtainable) pure... 

---