Fischer Tropsch process catalysts

Hydrogenation of carbon oxides with iron, cobalt, or nickel catalysts (Fischer-Tropsch process). Hydrocarbons are the main products Recovery and separation of oxygenated products obtained from CO and H2 Partial oxidation of nonaromatic hydrocarbon mixtures, e.g., petroleum, paraffins, and natural gas, to produce a mixture of products, such as esters, acids, aldehydes, ketones, and alcohols. This also includes higher fatty acids from petroleum and patents on formaldehyde production... 

Fischer-Tropsch Process. The Hterature on the hydrogenation of carbon monoxide dates back to 1902 when the synthesis of methane from synthesis gas over a nickel catalyst was reported (17). In 1923, F. Fischer and H. Tropsch reported the formation of a mixture of organic compounds they called synthol by reaction of synthesis gas over alkalized iron turnings at 10—15 MPa (99—150 atm) and 400—450°C (18). This mixture contained mostly oxygenated compounds, but also contained a small amount of alkanes and alkenes. Further study of the reaction at 0.7 MPa (6.9 atm) revealed that low pressure favored olefinic and paraffinic hydrocarbons and minimized oxygenates, but at this pressure the reaction rate was very low. Because of their pioneering work on catalytic hydrocarbon synthesis, this class of reactions became known as the Fischer-Tropsch (FT) synthesis. 

The second reaction is called the Fischer-Tropsch synthesis of hydrocarbons. Depending on the conditions and catalysts, a wide range of hydrocarbons from very light materials up to heavy waxes can be produced. Catalysts for the Fischer-Tropsch reaction iaclude iron, cobalt, nickel, and mthenium. Reaction temperatures range from about 150 to 350°C reaction pressures range from 0.1 to tens of MPa (1 to several hundred atm) (77). The Fischer-Tropsch process was developed iadustriaHy under the designation of the Synthol process by the M. W. Kellogg Co. from 1940 to 1960 (83). 

Sasol Fischer-Tropsch Process. 1-Propanol is one of the products from Sasol s Fischer-Tropsch process (7). Coal (qv) is gasified ia Lurgi reactors to produce synthesis gas (H2/CO). After separation from gas Hquids and purification, the synthesis gas is fed iato the Sasol Synthol plant where it is entrained with a powdered iron-based catalyst within the fluid-bed reactors. The exothermic Fischer-Tropsch reaction produces a mixture of hydrocarbons (qv) and oxygenates. The condensation products from the process consist of hydrocarbon Hquids and an aqueous stream that contains a mixture of ketones (qv) and alcohols. The ketones and alcohols are recovered and most of the alcohols are used for the blending of high octane gasoline. Some of the alcohol streams are further purified by distillation to yield pure 1-propanol and ethanol ia a multiunit plant, which has a total capacity of 25,000-30,000 t/yr (see Coal conversion processes, gasification). 

Medium Pressure Synthesis. Pressures of 500—2000 kPa (5—20 atm) were typical for the medium pressure Fischer-Tropsch process. Cobalt catalysts similar to those used for the normal pressure synthesis were typically used at temperatures ranging from 170 to 200°C ia tubular "heat exchanger" type reactors. 

FIG. 23-24 Reactors with moving catalysts, a) Transport fluidized type for the Sasol Fischer-Tropsch process, nonregenerating, (h) Esso type of stable fluidized bed reactor/regeuerator for cracldug petroleum oils, (c) UOP reformer with moving bed of platinum catalyst and continuous regeneration of a controlled quantity of catalyst, (d) Flow distribution in a fluidized bed the catalyst rains through the bubbles. 

Fluidized Catalyst Reactor. Two systems have been proposed, based on large scale operation of the Fischer-Tropsch process (to produce liquid hydrocarbons) at SASOL and at Carthage Hydrocol. The SASOL system was designed by M. W. Kellogg and has been operating for about 20 years (57, 58, 59, 60). 

In the Fischer-Tropsch process, carbon monoxide reacts with hydrogen in the presence of a solid catalyst, with the formation of a mixture of hydrocarbons. The composition of the product varies considerably with the catalyst and the operating conditions. The mixture may include (in addition to hydrocarbons) alcohols, aldehydes, ketones, and acids. 

Epoxides such as ethylene oxide and higher olefin oxides may be produced by the catalytic oxidation of olefins in gas-liquid-particle operations of the slurry type (S7). The finely divided catalyst (for example, silver oxide on silica gel carrier) is suspended in a chemically inactive liquid, such as dibutyl-phthalate. The liquid functions as a heat sink and a heat-transfer medium, as in the three-phase Fischer-Tropsch processes. It is claimed that the process, because of the superior heat-transfer properties of the slurry reactor, may be operated at high olefin concentrations in the gaseous process stream without loss with respect to yield and selectivity, and that propylene oxide and higher... 

The Fischer-Tropsch process is of considerable economic interest because it is the basis of conversion of carbon monoxide to synthetic hydrocarbon fuels, and extensive work has been done on optimization of catalyst systems. 

Rao, V. U. S., Stiegel, G. J., Cinquegrane, G. J., and Srivastava, R. D. 1992. Iron-based catalysts for slurry-phase Fischer-Tropsch process Technology review. Fuel Process. Technol. 30 83-107. 

Pankina, G. V., Chemavskii, P. A., Lermontov, A. S., and Lunin, V. V. 2002. Study of carbon deposits on the surface of supported cobalt catalysts in the Fischer-Tropsch process. Petrol. Chem. 42 217-20. 

Espinoza, R.L., Shingles, T., Duvenhage, D.J., and Langenhoven, P.L., Method of modifying and controlling catalyst selectivity in a Fischer-Tropsch process. U.S. patent 6,653,357, Sasol Technology, Nov. 25, 2003. 

Fischer-Tropsch process. 2. Catalysts. I. Davis, Burtron H., 1934-II. Occelli, Mario L., 1942- III. Title. IV. Series. 

In view of the size of operation being contemplated, it is unlikely that homogeneous catalysts will play a primary role in the production of synthetic oil. However, from the standpoint of the chemical industry, the complex mixture of products obtained from the classical Fischer-Tropsch process is generally unattractive owing to the economic constraints imposed by costly separation/purification processes. What is needed is a catalyst system for the selective conversion of CO/H2 mixtures to added-... 

Duftschmid A variation of the Fischer-Tropsch process in which synthesis gas and an oil are circulated over a fixed bed of iron catalyst in order to increase the yield of olefins from the gas. 

Kolbel-Rheinpreussen A process for converting syngas to gasoline. The gas was passed through a suspension of an iron catalyst in an oil. Developed by H. Kolbel at Rheinpreussen, Germany, from 1936 until the 1950s when it was supplanted by the Fischer-Tropsch process. 

Synol A version of the Fischer-Tropsch process developed in Germany during World War II. It used a different catalyst and produced a larger fraction of alcohols and olefins. 

Synthetic Oils Also known as the Robinson-Bindley process. A variation on the Fischer-Tropsch process which uses a different catalyst, a different H2/CO ratio, and yields a higher proportion of olefins in the product. Piloted by Synthetic Oils, United Kingdom, in the 1930s, but not commercialized. 

Synthine [Synthetic benzin] An early version of the Fischer-Tropsch process in which a mixture of carbon monoxide and hydrogen was passed over an iron catalyst and thereby converted to a complex mixture of oxygenates. 

In general, TPR measurements are interpreted on a qualitative basis as in the example discussed above. Attempts to calculate activation energies of reduction by means of Expression (2-7) can only be undertaken if the TPR pattern represents a single, well-defined process. This requires, for example, that all catalyst particles are equivalent. In a supported catalyst, all particles should have the same morphology and all atoms of the supported phase should be affected by the support in the same way, otherwise the TPR pattern would represent a combination of different reduction reactions. Such strict conditions are seldom obeyed in supported catalysts but are more easily met in unsupported particles. As an example we discuss the TPR work by Wimmers et al. [8] on the reduction of unsupported Fe203 particles (diameter approximately 300 nm). Such research is of interest with regard to the synthesis of ammonia and the Fischer-Tropsch process, both of which are carried out over unsupported iron catalysts. 

Fischer-Tropsch process, Fe catalysts, 39 104 Fischer-Tropsch reaction... 

In addition to this, solid acid catalysts can also be used in the hydroisomerization cracking of heavy paraffins, or as co-catalysts in Fischer-Tropsch processes. In the first case, it could also be possible to transform inexpensive refinery cuts with a low octane number (heavy paraffins, n-Cg 20) to fuel-grade gasoline (C4-C7) using bifunctional metal/acid catalysts. In the last case, by combining zeolites with platinum-promoted tungstate modified zirconia, hybrid catalysts provide a promising way to obtain clean synthetic liquid fuels from coal or natural gas. 

---