Fischer-Tropsch Sasol

Secunda discharges no process water effluents. AU. water streams produced are cleaned and reused in the plant. The methane and light hydrocarbons in the product are reformed with steam to generate synthesis gas for recycle (14). Even at this large scale, the cost of producing fuels and chemicals by the Fischer-Tropsch process is dominated by the cost of synthesis gas production. Sasol has estimated that gas production accounts for 58% of total production costs (39). 

A number of chemical products are derived from Sasol s synthetic fuel operations based on the Fischer-Tropsch synthesis including paraffin waxes from the Arge process and several polar and nonpolar hydrocarbon mixtures from the Synthol process. Products suitable for use as hot melt adhesives, PVC lubricants, cormgated cardboard coating emulsions, and poHshes have been developed from Arge waxes. Wax blends containing medium and hard wax fractions are useful for making candles, and over 20,000 t/yr of wax are sold for this appHcation. 

SASOL. SASOL, South Africa, has constmcted a plant to recover 50,000 tons each of 1-pentene and 1-hexene by extractive distillation from Fischer-Tropsch hydrocarbons produced from coal-based synthesis gas. The company is marketing both products primarily as comonomers for LLDPE and HDPE (see Olefin polymers). Although there is still no developed market for 1-pentene in the mid-1990s, the 1-hexene market is well estabhshed. The Fischer-Tropsch technology produces a geometric carbon-number distribution of various odd and even, linear, branched, and alpha and internal olefins however, with additional investment, other odd and even carbon numbers can also be recovered. The Fischer-Tropsch plants were originally constmcted to produce gasoline and other hydrocarbon fuels to fill the lack of petroleum resources in South Africa. 

Propanol has been manufactured by hydroformylation of ethylene (qv) (see Oxo process) followed by hydrogenation of propionaldehyde or propanal and as a by-product of vapor-phase oxidation of propane (see Hydrocarbon oxidation). Celanese operated the only commercial vapor-phase oxidation faciUty at Bishop, Texas. Since this faciUty was shut down ia 1973 (5,6), hydroformylation or 0x0 technology has been the principal process for commercial manufacture of 1-propanol ia the United States and Europe. Sasol ia South Africa makes 1-propanol by Fischer-Tropsch chemistry (7). Some attempts have been made to hydrate propylene ia an anti-Markovnikoff fashion to produce 1-propanol (8—10). However, these attempts have not been commercially successful. 

Sasol Fischer-Tropsch Process. 1-Propanol is one of the products from Sasol s Fischer-Tropsch process (7). Coal (qv) is gasified ia Lurgi reactors to produce synthesis gas (H2/CO). After separation from gas Hquids and purification, the synthesis gas is fed iato the Sasol Synthol plant where it is entrained with a powdered iron-based catalyst within the fluid-bed reactors. The exothermic Fischer-Tropsch reaction produces a mixture of hydrocarbons (qv) and oxygenates. The condensation products from the process consist of hydrocarbon Hquids and an aqueous stream that contains a mixture of ketones (qv) and alcohols. The ketones and alcohols are recovered and most of the alcohols are used for the blending of high octane gasoline. Some of the alcohol streams are further purified by distillation to yield pure 1-propanol and ethanol ia a multiunit plant, which has a total capacity of 25,000-30,000 t/yr (see Coal conversion processes, gasification). 

Development of SASOL. Over 70% of South Africa s needs for transportation fuels are being suppHed by iadirect Hquefaction of coal. The medium pressure Fischer-Tropsch process was put iato operation at Sasolburgh, South Africa ia 1955 (47). An overall flow schematic for SASOL I is shown ia Figure 12. The product slate from this faciUty is amazingly complex. Materials ranging from hydrocarbons through oxygenates, alcohols, and acids are all produced. 

Fig. 12. Flow scheme for the SASOL I Fischer-Tropsch process. To convert MPa to psig, multiply by 145.

The principal advance ia technology for SASOL I relative to the German Fischer-Tropsch plants was the development of a fluidized-bed reactor/regenerator system designed by M. W. Kellogg for the synthesis reaction. The reactor consists of an entrained-flow reactor ia series with a fluidized-bed regenerator (Fig. 14). Each fluidized-bed reactor processes 80,000 m /h of feed at a temperature of 320 to 330°C and 2.2 MPa (22 atm), and produces approximately 300 m (2000 barrels) per day of Hquid hydrocarbon product with a catalyst circulation rate of over 6000 t/h (49). 

Fig. 15. Block flow diagram, SASOL II and III, where F-T corresponds to Fischer-Tropsch, and BTX is bensene, toluene, xylene. To convert m to...

FIG. 23-24 Reactors with moving catalysts, a) Transport fluidized type for the Sasol Fischer-Tropsch process, nonregenerating, (h) Esso type of stable fluidized bed reactor/regeuerator for cracldug petroleum oils, (c) UOP reformer with moving bed of platinum catalyst and continuous regeneration of a controlled quantity of catalyst, (d) Flow distribution in a fluidized bed the catalyst rains through the bubbles. 

The Fischer-Tropsch reaction is highly exothermic. Therefore, adequate heat removal is critical. High temperatures residt in high yields of methane, as well as coking and sintering of the catalyst. Three types of reac tors (tubular fixed bed, fluidized bed, and slurry) provide good temperature control, and all three types are being used for synthesis gas conversion. The first plants used tubular or plate-type fixed-bed reactors. Later, SASOL, in South Africa, used fluidized-bed reactors, and most recently, slurry reactors have come into use. 

The largest Fischer-Tropsch facility based on natural gas is the Mossgas plant located in Mossel Bay, South Africa. Natural gas is converted to synthesis gas in a two-stage reformer and subsequently converted to hydrocarbons by SASOL s Synthol technology. The plant, commissioned in 1992, has a capacity of 7155 mVd (45,000 bbFd). 

Fischer Tropsch technology is best exemplified by the SASOL projects in South Africa. After coal is gasified to a synthesis gas mixture, it is purified in a rectisol unit. The purified gas mixture is reacted in a synthol unit over an iron-based catalyst. The main products are gasoline, diesel fuel, and jet fuels. By-products are ethylene, propylene, alpha olefins, sulfur, phenol, and ammonia which are used for the production of downstream chemicals. 

Fluidized Catalyst Reactor. Two systems have been proposed, based on large scale operation of the Fischer-Tropsch process (to produce liquid hydrocarbons) at SASOL and at Carthage Hydrocol. The SASOL system was designed by M. W. Kellogg and has been operating for about 20 years (57, 58, 59, 60). 

Consequently, two semicommercial pilot plants have been operated for 1.5 years. One plant, designed and erected by Lurgi and South African Coal, Oil, and Gas Corp. (SASOL), Sasolburg, South Africa, was operated as a sidestream plant to a commercial Fischer-Tropsch synthesis plant. Synthesis gas is produced in a commercial coal pressure gasification plant which includes Rectisol gas purification and shift conversion so the overall process scheme for producing SNG from coal could be demonstrated successfully. The other plant, a joint effort of Lurgi and El Paso Natural Gas Corp., was operated at the same time at Petrochemie Schwechat, near Vienna, Austria. Since the starting material was synthesis gas produced from naphtha, different reaction conditions from those of the SASOL plant have also been operated successfully. 

L. Seglin Why has Lurgi selected the hot gas recycle process for methanation rather than the isothermal reactor (ARGE) design which they used for the Fischer-Tropsch plant in SASOL s plant in South Africa ... 

Fischer-Tropsch reaction of CO/H2 to produce ethanol followed by the Sasol Kvaemer process. 

Dry, M. E. 1982. Sasol s Fischer-Tropsch experience. Hydrocarb. Process. 61 121-24. 

Espinoza, R. L., Steynberg, A. P., Jager, B., and Vosloo, A. C. 1999. Low temperature Fischer-Tropsch synthesis from a Sasol perspective. Appl. Catal. A 186 13-26. 

Espinoza, R.L., Shingles, T., Duvenhage, D.J., and Langenhoven, P.L., Method of modifying and controlling catalyst selectivity in a Fischer-Tropsch process. U.S. patent 6,653,357, Sasol Technology, Nov. 25, 2003. 

Selective Fuel Properties from Key Units in the Original Sasol 2 and 3 Fischer-Tropsch Oil Refineries... 

Oxygenates were recovered from the Fischer-Tropsch aqueous product, employing a separation strategy similar to that in the Sasol 1 refinery. The main difference was in volume, and this made further separation of the different alcohols and carbonyl compounds worthwhile. Some of the ethanol served as a blending component in motor gasoline, with the final blend containing around 10% ethanol.38 Most of the alcohols and carbonyl compounds were sold as chemicals. In addition to the oxygenates, the C2 hydrocarbons were also recovered and sold. 

Change occurred in high-temperature Fischer-Tropsch reactor technology. The circulating fluidized bed Sasol Synthol reactors were replaced by fixed fluidized bed Sasol Advanced Synthol (SAS) reactors.44 This did not meaningfully affect the Fe-HTFT syncrude composition, but it reduced the operating cost of HTFT synthesis. 

The design intent was to produce transportation fuels, and the design did not specifically make provision for chemicals co-production. It is in principle possible to extract chemicals from the HTFT syncrude, such as the alcohols that are being recovered from the Fischer-Tropsch aqueous product. Extraction of linear a-olefins may also be considered, which has indeed been investigated,57 and many other opportunities exist. However, it should be noted that the Mossgas facility is much smaller than the Sasol Synfuels facility, and recovery of valuable products in HTFT syncrude may not have economy of scale. 

Le Roux, J. H., and Qranje, S., Eds. 1984. Fischer-Tropsch waxes. Sasolburg Sasol. 

---