Casting basics

To realize a process integrated quality control the conception shown in fig. 2 was followed. The casting process which is influenced by process parameters like thermal economy, alloy composition or black wash will be pursued with particulary to the problematic nature adjusted sensoring systems. On basic factors orientated sensoring systems like microfocus radioscopy, and tomography will be employed and correlated with sensoring systems which can be applicated under industrial conditions. 

The AET was used at standard tests of numerous structural materials, above all steels and cast iron, prepared are ceramic samples. Part of tested samples had qjecial sur ce layer treatments by laser, plasma nitridation and similar. Effect of special surface treatment the authors published already earlier [5,6]. In this contribution are summed up typical courses of basic dependencies, measured by the AET at contact loading. 

Tellurium improves the machinability of copper and stainless steel, and its addition to lead decreases the corrosive action of sulfuric acid on lead and improves its strength and hardness. Tellurium is used as a basic ingredient in blasting caps, and is added to cast iron for chill control. Tellurium is used in ceramics. Bismuth telluride has been used in thermoelectric devices. 

The basic methods for forming film or sheeting materials may be classified as follows melt extmsion, calendering, solution casting, and chemical regeneration. Of special note is the use of biaxial orientation as part of the critical manufacturing steps for many film and sheet products. 

Most ferrous scrap is recycled in steelmaking processes by melting the scrap in either a basic oxygen or an electric arc furnace. However, a significant market exists for cast-iron products, which are also made by melting ferrous scrap. In 1991, world production of cast irons was estimated at nearly 3.9 X 10 t at over 14,000 iron foundries (15). 

PhenoHc resins are prepared by the reaction of phenol or substituted phenol with an aldehyde, especially formaldehyde, in the presence of an acidic or basic catalyst. Their thermosetting character and the exotherm associated with the reaction presented technical barriers to commercialization. In 1900, the first U.S. patent was granted for a phenoHc resin, using the resin in cast form as a substitute for hard mbber (10). 

Total hip implants of the nature described have hospital Hst prices ia the range of 5000— 8000. Fully custom-made implants cost approximately 10,000. The low end basic total hip implant is forged or cast stainless steel, cemented ia place, one size fits all, and costs 1000. 

S = basic allowable stress for materials, excluding casting, joint, or structural-grade quahty factors E = quahty factor. The quahty factor E is one or the product of more than one of the following quahty factors casting quality factor Ec, joint quahty factor Ej (see Fig. 10-164), and structural-grade quahty factor E, of 0.92. 

There are two basic types of cast iron white, and grey. The phases in white iron are a and FejC, and it is the large volume fraction of FejC that makes the metal brittle. The name comes from the silvery appearance of the fracture surface, due to light being reflected from cleavage planes in the FejC. In grey iron much of the carbon separates... 

The second largest market is that of profiles, particularly for the building industry. UPVC has become well established for guttering, waste piping and conduits, where economies arise not just in basic product costs but also in transportation and installation costs. Unlike with cast iron products, corrosion and maintenance is less of a problem, although UPVC products are more liable... 

The basic patent (US Patent 3256219) indicates that the system is viable with conventional resins although special grades have been developed that are said to be particularly suitable. One example in the patent recommends the use of a polyester prepared using a maleic acid, phthalic acid and propylene glycol ratio of 2 1 33 and with an acid value of 40. To 500g of such a resin are added 10g of benzoyl peroxide and 167 g of styrene. Water 600 g is then stirred in at 5-10°C until a white creamy water-in-oil emulsion is obtained. A solution of 0.8 g of dimethyl-p-toluidine in lOOg of styrene is stirred into the emulsion and the resin is cast between plates and cured at 50°C. 

Increasingly today, steels after they have been tapped (poured) from the furnace undergo a further stage of processing called secondary steelmaking before the steel is cast. This applies to both the basic oxygen process route and to the electric arc furnace route. 

---