Carbonylation reactions alcohol

Esters and acids from simple carbonylation reactions Alcohols, ethers and esters with higher homologous alkyl groups. Hydrocarbons from hydrogenolysis of the alcohol and its homologs. Ethers from dehydration of the substrate. Esters of the reagent alcohol. s)oiefins from dehydration of the alcohols. Isomeric alcohols. Isomer products (linear/branched 50/50 - 60/40). Only 2-methyl butanol Dimers and trimers of i-butene. 

As a unique reaction of Pd(II), the oxidative carbonylation of alkenes is possible with Pd(ll) salts. Oxidative carbonylation is mechanistically different from the hydrocarboxylation of alkenes catalyzed by Pd(0), which is treated in Chapter 4, Section 7.1. The oxidative carbonylation in alcohol can be understood in the following way. The reaction starts by the formation of the alkoxy-carbonylpalladium 218. Carbopalladation of alkene (alkene insertion) with 218 gives 219. Then elimination of /3-hydrogen of this intermediate 219 proceeds to... 

Oxidative carbonylation of alcohols with PdCh affords the carbonate 572 and oxalate 573(512-514]. The selectivity of the mono- and dicarbonylation depends on the CO pressure and reaction conditions. In order to make the reaction catalytic, Cu(II) and Fe(III) salts are used. Under these conditions, water is formed and orthoformate is added in order to trap the water. Di-/-butyl peroxide is also used for catalytic oxidative carbonylation to give carbonates and oxalates in the presence of 2,6-dimetliylpyridine(515]. 

Moderate yields of acids and ketones can be obtained by paHadium-cataly2ed carbonylation of boronic acids and by carbonylation cross-coupling reactions (272,320,321). In an alternative procedure for the carbonylation reaction, potassium trialkylborohydride ia the presence of a catalytic amount of the free borane is utilized (322). FiaaHy, various tertiary alcohols including hindered and polycycHc stmctures become readily available by oxidation of the organoborane iatermediate produced after migration of three alkyl groups (312,313,323). 

Hydroformylation. Probably the best known catalytic carbonylation reaction is the hydroformylation, or 0x0 reaction, for producing aldehydes and alcohols from carbon monoxide, hydrogen, and olefins (eq. 9) (36). 

Yoneda, N. Takahashi, Y Fukuhara, T. Suzuki, A. Bull. Chem. Soc. Jpn., 1986,59,2819. For reviews of other carbonylation reactions of alcohols and other saturated oxygenated compounds, see Bahrmann, H. Comils, B. in Falbe New Syntheses with Carbon Monoxide, Springer NY, 1980, p. 226 Piacenti, F. Bianchi, M. in Wender Pino Organic Syntheses via Metal Carbonyls, vol. 2 Wiley NY, 1977, p. 1. 

Since 1985, several thousands of publications have appeared on complexes that are active as catalysts in the addition of carbon monoxide in reactions such as carbonylation of alcohols, hydroformylation, isocyanate formation, polyketone formation, etc. It will therefore be impossible within the scope of this chapter to review all these reports. In many instances we will refer to recent review articles and discuss only the results of the last few years. Second, we will focus on those reports that have made use explicitly of coordination complexes, rather than in situ prepared catalysts. Work not containing identified complexes but related to publications discussing well-defined complexes is often mentioned by their reference only. Metal salts used as precursors on inorganic supports are often less well defined and most reports on these will not be mentioned. 

Numerous reactions of carbonyl compounds, alcohols, olefins, etc., with compounds bearing E14=X bonds in which the latter act as direct analogs of phosphorus and arsenic ylides have already been accomplished.17 Recently, an interest in reactivity of compounds with multiple E14-X bonds is increasing due to challenges of important practical applications (see,... 

The insertion of carbon monoxide into o-alkylpalladium(II) complexes followed by attack by either alcohols or amines is a powerful acylation method. This carbonylation reaction has been applied in several different ways to the reactions and syntheses of indoles. Hegedus and coworkers converted o-allylanilines to indoline esters 315 in yields up to 75% [293], In most of the examples in this section, CO at atmospheric pressure was employed. 

To synthesize pyrazinecarboxylic esters and pyrazinecarboxamides, chloropyrazines were subjected to Pd-catalyzed carbonylation reactions in either alcohols or dialkylamines [44, 45]. 2-Chloro-3,6-dimethylpyrazine (23) was smoothly carbonylated in methanol containing a catalytic amount of Pd(dba)2 and Ph3P to give 2-methoxycarbonyl-3,6-dimethylpyrazine (70). Somewhat lower yields were observed in the preparation of pyrazinecarboxylic diesters under the same conditions. 

Another interesting cyclization employing 2-hydroxy-substituted methoxyallenes 101 was reported by Takahashi et al. (Scheme 8.29) [85]. Their novel Ru3(CO)12-cata-lyzed carbonylation reaction of allenyl alcohols 101 furnished y-lactones 108 in almost quantitative yields. 

Abstract The use of Co building block in presence of water or an alcohol to functionalise alkenes by hydroxycarbonylation or alkoxycarbonylation reactions is reviewed in this chapter. The hydroxyl groups can be present in the substrate itself so cascade reactions can occur. Palladium precursors are largely involved in these reactions and this analysis of the literature focuses on the mechanisms involving Pd(0), Pd(H)(X)L2, PdX2 and an oxidant like CuCl systems. Introduction of chiral L or L2 ligands or even the presence of chiral carbon atoms in the substrate lead to asymmetric carbonylation reactions. 

Geraniol is an interesting substrate that presents a hindered terminal C = C bond and an allylic function. The carbonylation reaction gives, beside the acid, the six-membered lactone and not the butyrolactone that means that initially an isomerization step occurred as depicted in Scheme 13. The most adapted ligand to obtain good selectivity in this lactone is dppb [98]. In the case of perillyl alcohol such an isomerization does not occur and the C5-lactone is produced (Scheme 14) [99]. 

Abstract The basic principles of the oxidative carbonylation reaction together with its synthetic applications are reviewed. In the first section, an overview of oxidative carbonylation is presented, and the general mechanisms followed by different substrates (alkenes, dienes, allenes, alkynes, ketones, ketenes, aromatic hydrocarbons, aliphatic hydrocarbons, alcohols, phenols, amines) leading to a variety of carbonyl compounds are discussed. The second section is focused on processes catalyzed by Pdl2-based systems, and on their ability to promote different kind of oxidative carbonylations under mild conditions to afford important carbonyl derivatives with high selectivity and efficiency. In particular, the recent developments towards the one-step synthesis of new heterocyclic derivatives are described. 

Oxidative carbonylation is not necessarily associated with C - C bond formation. Indeed, heteroatom carbonylation may occur exclusively, as in the oxidative carbonylation of alcohols or phenols to carbonates, of alcohols and amines to carbamates, of aminoalcohols to cyclic carbamates, and of amines to ureas. All these reactions are of particular significance, in view of the possibility to prepare these very important classes of carbonyl compounds through a phosgene-free approach. These carbonylations are usually carried out in the presence of an appropriate oxidant under catalytic conditions (Eqs. 31-33), and in some cases can be promoted not only by transition metals but also by... 

The oxidative carbonylation of alcohols and phenols to carbonates can be catalyzed by palladium or copper species [154-213]. This reaction is of particular practical importance, since it can be developed into an industrial process for the phosgene-free synthesis of dimethyl carbonate (DMC) and diphenyl carbonate (DPC), which are important industrial intermediates for the production of polycarbonates. Moreover, DMC can be used as an eco-friendly methylation and carbonylation agent [214,215]. The industrial production of DMC by oxidative carbonylation of methanol has been achieved by Enichem [216] and Ube [217]. 

Complexes of other metals are also capable of catalyzing useful carbonylation reactions under phase transfer conditions. For example, certain palladium(o) catalysts, like Co2(C0)g, can catalyze the carbonylation of benzylic halides to carboxylic acids. When applied to vinylic dibromides, unsaturated diacids or diynes were obtained, using Pd(diphos)2[diphos l,2-bis(diphenylphosphino)ethane] as the metal catalyst, benzyltriethylammonium chloride as the phase transfer agent, and t-amyl alcohol or benzene as the organic phase(18),... 

A number of ruthenium-based catalysts for syn-gas reactions have been probed by HP IR spectroscopy. For example, Braca and co-workers observed the presence of [Ru(CO)3l3]", [HRu3(CO)ii]" and [HRu(CO)4] in various relative amounts during the reactions of alkenes and alcohols with CO/H2 [90]. The hydrido ruthenium species were found to be active in alkene hydroformylation and hydrogenation of the resulting aldehydes, but were inactive for alcohol carbonylation. By contrast, [Ru(CO)3l3]" was active in the carbonylation of alcohols, glycols, ethers and esters and in the hydrogenation of alkenes and oxygenates. 

Reactions lla-e add up to Reaction 10. Reactions lla-b have been shown above to be catalyzed by Rh/CH3l. Reaction 11c, i.e. acid-catalysed pyrolysis of EDA to acetaldehyde and acetic anhydride, is well documented (9). Both reaction lid, hydrogenation of aldehyde, and Reaction lie, carbonylation of alcohols, are of course well known. The reaction sequence is in agreement with the fact that EDA and AH, especially in short-duration experiments, are detected as by-products. Acetaldehyde is also observed in small quantities, but no ethanol is found. Possibly, Reactions lid and He occur concertedly. We have separately demonstrated that both EDA and AH are suitable feeds to produce propionic acid under homologation reactions conditions. We thus demonstrated... 

In oxidation studies it has usually been assumed that thermal decomposition of alkyl hydroperoxides leads to the formation of alcohols. However, carbonyl-forming eliminations of hydroperoxides, usually under the influence of base, are well known. Of more interest, nucleophlic rearrangements, generally acid-catalyzed, have been shown to produce a mixture of carbonyl and alcohol products by fission of the molecule (6). For l-butene-3-hydroperoxide it might have been expected that a rearrangement (Reaction 1) similar to that which occurs with cumene hydroperoxide could produce two molecules of acetaldehyde. 

Another clear example of an acetylene insertion reaction was reported by Chiusoli (15). He observed that allylic halides react catalytically with nickel carbonyl in alcoholic solution, in the presence of CO and acetylene, to form esters of cis-2,5-hexadienoic acid. The intermediate in this reaction is very probably a 7r-allylnickel carbonyl halide, X, which then undergoes acetylene insertion followed by CO insertion and alcoholysis or acyl halide elimination (35). Acetylene is obviously a considerably better inserting group than CO in this reaction since with acetylene and CO, the hexadienoate is the only product, whereas, with only CO, the 3-butenoate ester is formed (15). [See Reaction 59]. 

There are a number of amine-catalyzed carbonylation reactions which are catalyzed by cobalt carbonyl and iron carbonyl. It seems to me that these are insertion reactions of metal amides, where carbon monoxide is inserted and then some kind of a reduction or subsequent reaction gives the observed products, urea derivatives or carbamates in alcohols. We do not know the structure of the iron compound it is probably similar to the cobalt species shown. 

A very promising synthesis of /3-lactones has been recently reported, involving the palladium-catalyzed carbonylation reaction of halogeno alcohols. For example, 3-phenyl-2-oxetanone was obtained in 63% yield from 2-phenyl-2-bromoethanol in DMF solution at room temperature under 1 atmosphere pressure of carbon monoxide (equation 115). A proposed mechanism, in which palladium metal inserts into the carbon-halogen bond, followed by insertion of a molecule of carbon monoxide into the carbon-palladium bond and then ring closure, fits kinetics data (80JA4193). 

---