2-Butene synthesis

Recently, Monsanto has developed a carbonylation route(50) to prepare adipic acid from butenes. The process is based on dicarbonylation of 1, 4-dimethoxy- -butene with a palladium catalyst containing chloride ligands. This approach could achieve commercial potential if an economically viable 1,4-disubstituted -butene synthesis can be developed. A direct butene carbonylation rout to adipic acid is a desirable research target. 

Chemikova, 1. M., Pisman, 1. L, and Dalin, M. A., Optimal experimental conditions for the 1-butene synthesis, Azerb. Khim. Zhur, 1965, 35 (Russian). 

Cydopentane reagents used in synthesis are usually derived from cyclopentanone (R.A. Ellison, 1973). Classically they are made by base-catalyzed intramolecular aldol or ester condensations (see also p. 55). An important example is 2-methylcydopentane-l,3-dione. It is synthesized by intramolecular acylation of diethyl propionylsucdnate dianion followed by saponification and decarboxylation. This cyclization only worked with potassium t-butoxide in boiling xylene (R. Bucourt, 1965). Faster routes to this diketone start with succinic acid or its anhydride. A Friedel-Crafts acylation with 2-acetoxy-2-butene in nitrobenzene or with pro-pionyl chloride in nitromethane leads to acylated adducts, which are deacylated in aqueous acids (V.J. Grenda, 1967 L.E. Schick, 1969). A new promising route to substituted cyclopent-2-enones makes use of intermediate 5-nitro-l,3-diones (D. Seebach, 1977). 

Zinc acetylides, prepared in situ by the treatment of lithium acetylides with ZnCF, are widely used. The zinc acetylide 311, prepared in situ, reacts with (Z)-3-iodo-2-buten-l-ol (312) with nearly complete retention of stereochemistry to afford an important intermediate 313 for carotenoid synthesis[227]. 

The isoprenoid compound shown is a scent marker present in the urine of the red fox Sug gest a reasonable synthesis for this substance from 3 methyl 3 buten 1 ol and any necessary organic or inorganic reagents... 

Asymmetric Hydroboration. Hydroboration—oxidation of (Z)-2-butene with diisopinocampheylborane was the first highly enantioselective asymmetric synthesis (496) the product was R(—)2-butanol in 87% ee. Since then several asymmetric hydroborating agents have been developed. Enantioselectivity in the hydroboration of significant classes of prochiral alkenes with representative asymmetric hydroborating agents is shown in Table 3. 

Butene Hydroformylation, A mote recendy developed process for the synthesis of isoprene is butene hydroformylation followed by dehydration. This process has not been practiced commercially, but processing steps are similar to commercial processes (119). 2-Butene is hydroformylated to 2-methylbutanol which is then dehydrated to isoprene. 

CH2=CHCH(NH2)CH2CH2C00H (18), obtained through condensation of diethyl malonate with l,4-dichloro-2-butene [764-41-0] (43), or the antiulcer Rebamipide [90098-04-7] (19), whose synthesis involves the use of 2-(acetylamino)malonate (44), are examples of new pharmaceuticals recently launched. 

The second type of solution polymerization concept uses mixtures of supercritical ethylene and molten PE as the medium for ethylene polymerization. Some reactors previously used for free-radical ethylene polymerization in supercritical ethylene at high pressure (see Olefin POLYMERS,LOW DENSITY polyethylene) were converted for the catalytic synthesis of LLDPE. Both stirred and tubular autoclaves operating at 30—200 MPa (4,500—30,000 psig) and 170—350°C can also be used for this purpose. Residence times in these reactors are short, from 1 to 5 minutes. Three types of catalysts are used in these processes. The first type includes pseudo-homogeneous Ziegler catalysts. In this case, all catalyst components are introduced into a reactor as hquids or solutions but form soHd catalysts when combined in the reactor. Examples of such catalysts include titanium tetrachloride as well as its mixtures with vanadium oxytrichloride and a trialkyl aluminum compound (53,54). The second type of catalysts are soHd Ziegler catalysts (55). Both of these catalysts produce compositionaHy nonuniform LLDPE resins. Exxon Chemical Company uses a third type of catalysts, metallocene catalysts, in a similar solution process to produce uniformly branched ethylene copolymers with 1-butene and 1-hexene called Exact resins (56). 

The synthesis of isotactic polymers of higher a-olefins was discovered in 1955, simultaneously with the synthesis of isotactic PP (1,2) syndiotactic polymers of higher a-olefins were first prepared in 1990 (3,4). The first commercial production of isotactic poly(l-butene) [9003-29-6] (PB) and poly(4-methyl-l-pentene) [9016-80-2] (PMP) started in 1965 (5). 

However, the composition of the mixture can be controlled to some extent by the correct choice of olefin and reaction conditions. For example, the production of tertiary phosphines can be maximi2ed by conducting the reaction at relatively low phosphine pressures, 1.5 MPa (200 psi), and using a 20—30% stoichiometric excess of a straight-chained olefin as in the synthesis of tributylphosphine [988-40-3] by reaction with 1-butene [106-98-9]. 

An example of a specialty olefin from an amyl alcohol is Phillips Petroleum s new process for 3-methyl-1-butene (used in the synthesis of pyrethroids) from the catalytic dehydration of 3-methyl-1-butanol (21,22). The process affords 94% product selectivity and 94% alcohol conversion at 310°C and 276 kPa (40 psig). 

Furalazine, Acetylfuratrizine, Panfuran-S. Heating nitrovin in butanol or dimethylformamide at 100—130°C affords furalazine, 6-[2-(5-nitro-2-furanyl)ethenyl]-l,2,4-triazine-3-amine (34). An improved synthesis originates with 5-nitro-2-furancarboxaldehyde and acetone, proceeds through 4-(5-nitro-2-furanyl)-3-buten-2-one followed by a selenium dioxide oxidation to the pymvaldehyde hydrate, and subsequent reaction with aininoguariidine (35). Furalazine, acetylfuratrizine (36), and the A[-A/-bis(hydroxymethyl) derivative, Panfuran-S, formed from the parent compound and formaldehyde (37), are systemic antibacterial agents. 

The application of the AE reaction to kinetic resolution of racemic allylic alcohols has been extensively used for the preparation of enantiomerically enriched alcohols and allyl epoxides. Allylic alcohol 48 was obtained via kinetic resolution of the racemic secondary alcohol and utilized in the synthesis of rhozoxin D. Epoxy alcohol 49 was obtained via kinetic resolution of the enantioenriched secondary allylic alcohol (93% ee). The product epoxy alcohol was a key intermediate in the synthesis of (-)-mitralactonine. Allylic alcohol 50 was prepared via kinetic resolution of the secondary alcohol and the product utilized in the synthesis of (+)-manoalide. The mono-tosylated 3-butene-1,2-diol is a useful C4 building block and was obtained in 45% yield and in 95% ee via kinetic resolution of the racemic starting material. 

Other PK variations include microwave conditions, solid-phase synthesis, and the fixation of atmospheric nitrogen as the nitrogen source (27—>28). Hexamethyldisilazane (HMDS) is also an excellent ammonia equivalent in the PK synthesis. For example, 2,5-hexanedione and HMDS on alumina gives 2,5-dimethylpyrrole in 81% yield at room temperature. Ammonium formate can be used as a nitrogen source in the PK synthesis of pyrroles from l,4-diaryl-2-butene-l,4-diones under Pd-catalyzed transfer hydrogenation conditions. 

Oxidation of n-hutane to maleic anhydride is becoming a major source for this important chemical. Maleic anhydride could also be produced by the catalytic oxidation of n-butenes (Chapter 9) and benzene (Chapter 10). The principal use of maleic anhydride is in the synthesis of unsaturated polyester resins. These resins are used to fabricate glass-fiber reinforced materials. Other uses include fumaric acid, alkyd resins, and pesticides. Maleic acid esters are important plasticizers and lubricants. Maleic anhydride could also be a precursor for 1,4-butanediol (Chapter 9). 

The three isomers constituting n-hutenes are 1-hutene, cis-2-hutene, and trans-2-hutene. This gas mixture is usually obtained from the olefinic C4 fraction of catalytic cracking and steam cracking processes after separation of isobutene (Chapter 2). The mixture of isomers may be used directly for reactions that are common for the three isomers and produce the same intermediates and hence the same products. Alternatively, the mixture may be separated into two streams, one constituted of 1-butene and the other of cis-and trans-2-butene mixture. Each stream produces specific chemicals. Approximately 70% of 1-butene is used as a comonomer with ethylene to produce linear low-density polyethylene (LLDPE). Another use of 1-butene is for the synthesis of butylene oxide. The rest is used with the 2-butenes to produce other chemicals. n-Butene could also be isomerized to isobutene. ... 

The Stork enamine reaction and the intramolecular aldol reaction can be carried out in sequence to allow the synthesis of cyclohexenones. For example, reaction of the pyrrolidine enamine of cyclohexanone with 3-buten-2-one. followed by enamine hydrolysis and base treatment, yields the product indicated. Write each step, and show the mechanism of each. 

Olefin metathesis of vinylboronates [102] and allylboronates [103, 104] has been investigated over the past few years because organoboranes are versatile intermediates for organic synthesis. Cross metathesis of vinylboronate 108 and 2-butene 109, for example, yields the boronate 110, which can be converted to the corresponding vinyl bromide 111 with high Z selectivity. Vinyl iodides can be obtained analogously. It should be noted that vinyl bromides and vinyl... 

E. Smotkin The group of Professor Smotkin at Illinois (IIT) was first to demonstrate NEMCA for an isomerization reaction (1-butene to cis-and trans-2-butene) over a Pd/Nafion catalyst at room temperature. This important and spectacular discovery underlines the great potential ofNafion for inducing NEMCA at low temperatures for numerous important organic synthesis reactions. 

FeX3 was also found to be an excellent promoter in the classical Prins cycliza-tion (Scheme 10, route H), with the observation of a satisfactory reaction between 3-buten-l-ol and several aldehydes, affording the corresponding c/s-4-halo-2-alkyl tetrahydrop3Tans in good yields [Eq. (1) in Scheme 32] [35], In a similar manner, the methodology can be extended to the piperidine synthesis through an aza-Prins cyclization [Eq. (2), Scheme 32] [41],... 

The reacticai mechanism is investigated by using DFT calculations [128,129] indicating formation of a Fe-H species to be an important step. In case of 1 -butene, the synthesis... 

---