Butadiene copolymers with methyl

The concentration of (Z)-configuration varies indirectly proportional with the polymerization temperatnre whereas the other three configurations vary directly proportional with the polymerization temperature. The total amoimt of E-, 1,2-, and 3,4- configurations vary from 5% at —40°C to 30% of the total polymer backbone at 100°C polymerization temperatures. Other structvu-al studies have involved 2,3-dichloro- butadiene homopolymer (52), the free-radical random copolymer with methyl methacrylate (53) with chloroprene, and the alternating copolymer of sulfur dioxide with chloroprene (54). Petiaud and Pham studied the thermodynamics of the various modes of imit addition (55). 

Acryhc stmctural adhesives have been modified by elastomers in order to obtain a phase-separated, toughened system. A significant contribution in this technology has been made in which acryhc adhesives were modified by the addition of chlorosulfonated polyethylene to obtain a phase-separated stmctural adhesive (11). Such adhesives also contain methyl methacrylate, glacial methacrylic acid, and cross-linkers such as ethylene glycol dimethacrylate [97-90-5]. The polymerization initiation system, which includes cumene hydroperoxide, N,1S7-dimethyl- -toluidine, and saccharin, can be apphed to the adherend surface as a primer, or it can be formulated as the second part of a two-part adhesive. Modification of cyanoacrylates using elastomers has also been attempted copolymers of acrylonitrile, butadiene, and styrene ethylene copolymers with methylacrylate or copolymers of methacrylates with butadiene and styrene have been used. However, because of the extreme reactivity of the monomer, modification of cyanoacrylate adhesives is very difficult and material purity is essential in order to be able to modify the cyanoacrylate without causing premature reaction. 

G-5—G-9 Aromatic Modified Aliphatic Petroleum Resins. Compatibihty with base polymers is an essential aspect of hydrocarbon resins in whatever appHcation they are used. As an example, piperylene—2-methyl-2-butene based resins are substantially inadequate in enhancing the tack of 1,3-butadiene—styrene based random and block copolymers in pressure sensitive adhesive appHcations. The copolymerization of a-methylstyrene with piperylenes effectively enhances the tack properties of styrene—butadiene copolymers and styrene—isoprene copolymers in adhesive appHcations (40,41). Introduction of aromaticity into hydrocarbon resins serves to increase the solubiHty parameter of resins, resulting in improved compatibiHty with base polymers. However, the nature of the aromatic monomer also serves as a handle for molecular weight and softening point control. 

Fig. 10. Preparation and morphology of toughened PVC (a) secondary PVC grain (50—250 flm) (b) modified PVC with coherent primary grain (ca 1 -lm) (220). CPE = chlorinated polyethylene EVA = ethylene—vinyl acetate copolymers ABS = acrylonitrile—butadiene—styrene MBS = methyl...

Uses Copolymerized with methyl acrylate, methyl methacrylate, vinyl acetate, vinyl chloride, or 1,1-dichloroethylene to produce acrylic and modacrylic fibers and high-strength fibers ABS (acrylonitrile-butadiene-styrene) and acrylonitrile-styrene copolymers nitrile rubber cyano-ethylation of cotton synthetic soil block (acrylonitrile polymerized in wood pulp) manufacture of adhesives organic synthesis grain fumigant pesticide monomer for a semi-conductive polymer that can be used similar to inorganic oxide catalysts in dehydrogenation of tert-butyl alcohol to isobutylene and water pharmaceuticals antioxidants dyes and surfactants. 

Bauer et al. describe the use of a noncontact probe coupled by fiber optics to an FT-Raman system to measure the percentage of dry extractibles and styrene monomer in a styrene/butadiene latex emulsion polymerization reaction using PLS models [201]. Elizalde et al. have examined the use of Raman spectroscopy to monitor the emulsion polymerization of n-butyl acrylate with methyl methacrylate under starved, or low monomer [202], and with high soUds-content [203] conditions. In both cases, models could be built to predict multiple properties, including solids content, residual monomer, and cumulative copolymer composition. Another study compared reaction calorimetry and Raman spectroscopy for monitoring n-butyl acrylate/methyl methacrylate and for vinyl acetate/butyl acrylate, under conditions of normal and instantaneous conversion [204], Both techniques performed well for normal conversion conditions and for overall conversion estimate, but Raman spectroscopy was better at estimating free monomer concentration and instantaneous conversion rate. However, the authors also point out that in certain situations, alternative techniques such as calorimetry can be cheaper, faster, and often easier to maintain accurate models for than Raman spectroscopy, hi a subsequent article, Elizalde et al. found that updating calibration models after... 

Compositionally uniform copolymers of tributyltin methacrylate (TBTM) and methyl methacrylate (MMA) are produced in a free running batch process by virtue of the monomer reactivity ratios for this combination of monomers (r (TBTM) = 0.96, r (MMA) = 1.0 at 80°C). Compositional ly homogeneous terpolymers were synthesised by keeping constant the instantaneous ratio of the three monomers in the reactor through the addition of the more reactive monomer (or monomers) at an appropriate rate. This procedure has been used by Guyot et al 6 in the preparation of butadiene-acrylonitrile emulsion copolymers and by Johnson et al (7) in the solution copolymerisation of styrene with methyl acrylate. 

Since the late 1960 s a few papers have demonstrated compositional analysis of various polymer systans by Raman spectroscopy. For example, Boerio and Yuann (U) developed a method of analysis for copolymers of glycidyl methacrylate with methyl methacrylate and styrene. Sloane and Bramston-Cook (5) analyzed the terpolymer system poly(methyl methacrylate-co-butadiene-co-styrene). The composition of copolymers of styrene-ethylene dimethacrylate and styrene-divinylbenzene was determined by Stokr et (6). Finally, Water (7) demonstrated that Raman spectroscopy could determine the amount of residual monomer in poly(methyl methacrylate) to the % level. This was subsequently lowered to less than 0.1% (8). In spite of its many advantages, the potential of Raman spectroscopy for the analysis of polymer systems has never been fully exploited. 

M.K. Laughner, Molding compositions with methyl (meth)acrylate-butadiene-styrene graft copolymers, US Patent 5 087 663, assigned to The Dow Chemical Company (Midland, MI), February 11,1992. 

Products with improved properties use instead pure PMMA a terpolymer from 1,3-butadiene, styrene, and methyl methacrylate (8). Actually, the proposed blend consists of up to 6 components of copolymers of different composition and particle diameters. 

The GPC analysis of block copolymers is handicapped by the difficulty in obtaining a calibration curve. A method has recently been suggested to circumvent this difficulty by using the calibration curves of homopolymers. This method has been extended so that the calibration curves of block copolymers of various compositions can be constructed from the calibration curve of one-component homopolymers and Mark-Houwink parameters. The intrinsic viscosity data on styrene-butadiene and styrene-methyl methacrylate block polymers were used for verification. The average molecular weight determined by this method is in excellent agreement with osmometry data while the molecular weight distribution is considerably narrower than what is implied by the polydispersity index calculated from the GPC curve in the customary manner. 

The composition of the grafted side chain copolymer has also been determined by Sakurada (113) and found to be different from the normal copolymer formed with acrylonitrile and butadiene. With styrene the grafted copolymers were found to be richer in acrylonitrile than the normal copolymer. Similar differences were found by Resting (114) with methyl methacrylate and styrene grafted to cotton and by Odian et al. (115) with grafting mixed monomers to Teflon and to polyethylene. It is believed that one monomer may be preferentially sorbed or diffused faster than the other, leading to a different monomer ratio at the actual site of grafting. 

Polymerization of 2-methylpropene in the presence of small amounts of 2-methyl-1,3-butadiene (isoprene) gives a copolymer with enough double bonds to permit cross-linking of the polymer chains through vulcanization. The product is a hard-wearing, chemically resistant rubber called butyl rubber. It is highly impermeable to air and is used widely for inner tubes for tires. 

Terpolymers made from two different olefins and CO are known. They were first described in Brubaker s initial patent and involved the free radical initiated terpolymerization of CO and C2H with another olefin such as propylene, isobutylene, butadiene, vinyl acetate, diethyl maleate or tetrafluoroethylene More recently, in another patent, Hammer has described the free radical initiated terpolymerization of CO and C2H with vinyl esters, vinyl ethers or methyl methacrylate 26Reaction temperatures of 180-200 °C and a combined pressure of 186 MPa were employed. Typically a CO QH4 olefin molar ratio of 10 65 25 was observed in the terpolymers. In other patents, Hammer 27,28) has described the formation of copolymers with pendant epoxy groups by the free radical initiated polymerization of CO, QH4, vinyl acetate and glycidyl methacrylate. Reaction conditions similar to those stated above were employed, and a typical CO C2H vinyl acetate glycidyl methacrylate molar ratio of 10 65 20 5 was observed in the product polymer. 

The mechanical degradation and production of macroradicals can also be performed by mastication of polymers brought into a rubbery state by admixture with monomer several monomer-polymer systems were examined (10, 11). This technique was for instance studied for the cold mastication of natural rubber or butadiene copolymers in the presence of a vinyl monomer (13, 31, 52). The polymerization of methyl methacrylate or styrene during the mastication of natural rubber has yielded copolymers which remain soluble up to complete polymerization vinyl acetate, which could not produce graft copolymers by the chain transfer technique, failed also in this mastication procedure. Block and graft copolymers were also prepared by cross-addition of the macroradicals generated by the cold milling and mastication of mixtures of various elastomers and polymers, such as natural rubber/polymethyl methacrylate (74), natural rubber/butadiene-styrene rubbers (76) and even phenol-formaldehyde resin/nitrile rubber (125). 

Comparison of Methyl Methacrylate-Butadiene-Styrene with Acrylonitrile-Butadiene—Styrene Graft Copolymers... 

In the polymer impregnated gels, some porosity typically remains. Although some copolymers of methyl methacrylate, butadiene and styrene have been used to impregnate silica, the best known system is still silica impregnated with polymethyl methacrylate (PMMA)150-153. While this type of hybrid was important at first, it has been surpassed by other methods of hybrid synthesis that are simpler, with fewer steps and shorter times. 

Miyaki and Fujimoto and co-workers [16,17] have obtained an even finer distribution of fixed charge groups by casting films from multicomponent block copolymers such as poly(isoprene- >-styrene- >-butadiene- >-(4-vinyl benzyl)dime-thylamine- Msoprene). These films show a very regular domain structure with a 200-500 A spacing. After casting the polymer film, the (4-vinyl benzyl) dimethy-lamine blocks were quatemarized with methyl iodide vapor, and the styrene blocks were sulfonated with chlorosulfuric acid. 

Polyitaconic add is converted completdy to the methyl ester with diazomethane (7), while Fisher esterification results in partial esterification of both itaconic acid homo- and copolymers (6). DMI homopolymers and its copolymer with butadiene can be reduced with lithium aluminum hydride to the polymeric alcohols, which on the basis of solubility, may under some conditions be partially cross-linked by intermolecular ester formation (6). Hydrazine converts polydimethyl itaccmate to the polymeric dihydrazide which is water-soluble and exhibits reducing properties. The hydrazide can be treated with aldehyde or ketones to form polymeric hydrazones (45). A cross-linked polymer of bi chloroethyl ita-conate) on treatment with trietlylamine, has been converted by partial quatemization to an anion exchange resin (46). 

---