Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Metal ion buffers

Buffer-metal ion complexes nonexistent or soluble and well defined. [Pg.42]

The liquid chemical developers that have been in use in the IC industry are basic, aqueous solutions. The main two classes are the buffered metal-ion-containing (e.g., sodium metasilicate) and the metal-ion-free (MIF) developers (e.g., aqueous solutions of TMAH). Both classes of developers are typically formulated with additives such as surfactants to improve wetting.The buffered systems can be used at lower pH for the same normality, and thus offer better... [Pg.504]

Direct Titrations. The most convenient and simplest manner is the measured addition of a standard chelon solution to the sample solution (brought to the proper conditions of pH, buffer, etc.) until the metal ion is stoichiometrically chelated. Auxiliary complexing agents such as citrate, tartrate, or triethanolamine are added, if necessary, to prevent the precipitation of metal hydroxides or basic salts at the optimum pH for titration. Eor example, tartrate is added in the direct titration of lead. If a pH range of 9 to 10 is suitable, a buffer of ammonia and ammonium chloride is often added in relatively concentrated form, both to adjust the pH and to supply ammonia as an auxiliary complexing agent for those metal ions which form ammine complexes. A few metals, notably iron(III), bismuth, and thorium, are titrated in acid solution. [Pg.1167]

The pH of an NH3/NH4CI buffer (piQ = 9.24) is sufficient to ensure the precipitation of most metals as the hydroxide. The alkaline earths and alkaline metals, however, will not precipitate at this pH. In addition, metal ions that form soluble complexes with NH3, such as Cu +, Zn +, NP+, and Co +, also will not precipitate under these conditions. [Pg.211]

Description of the Method. The operational definition of water hardness is the total concentration of cations in a sample capable of forming insoluble complexes with soap. Although most divalent and trivalent metal ions contribute to hardness, the most important are Ca + and Mg +. Hardness is determined by titrating with EDTA at a buffered pH of 10. Eriochrome Black T or calmagite is used as a visual indicator. Hardness is reported in parts per million CaCOs. [Pg.326]

Because they are weak acids or bases, the iadicators may affect the pH of the sample, especially ia the case of a poorly buffered solution. Variations in the ionic strength or solvent composition, or both, also can produce large uncertainties in pH measurements, presumably caused by changes in the equihbria of the indicator species. Specific chemical reactions also may occur between solutes in the sample and the indicator species to produce appreciable pH errors. Examples of such interferences include binding of the indicator forms by proteins and colloidal substances and direct reaction with sample components, eg, oxidising agents and heavy-metal ions. [Pg.468]

Uses. The principal use of monosodium phosphate is as a water-soluble soHd acid and pH buffer, primarily in acid-type cleaners. The double salt, NaH2P04 H PO, referred to as hemisodium orthophosphate or sodium hemiphosphate, is often generated in situ from monosodium phosphate and phosphoric acid in these types of formulations. Mixtures of mono- and disodium phosphates are used in textile processing, food manufacture, and other industries to control pH at 4—9. Monosodium phosphate is also used in boiler-water treatment, as a precipitant for polyvalent metal ions, and as an animal-feed supplement. [Pg.332]

Calcium and magnesium can be titrated readily with disodium ethylenediaminetetraacetate, with Eriochrome Black T as the indicator. The solution is buffered at pH 10.0. Certain metal ions interfere with this procedure by causing fading or indistinct end points. Cyanide, sulfide, or hydroxjiamine can be used to eliminate or minimise the interferences. [Pg.231]

The concentration of the metal ion can be controlled by adjusting the ratio of the concentrations of free ligand and metal chelate. If both species are present in appreciable amounts, moderate changes in either concentration have Httie effect on the ratio. The concentration of the metal ion can thus be buffered in a manner analogous to the buffeting of pH by the presence of a weak acid and its anion... [Pg.391]

By buffering the metal ion concentration using a chelant, E can be adjusted to and stabilized at values that give desirable properties to the deposit. Selective buffering can sequester the properties of interfering ions or can be used to regulate the potentials of two or more ions to approximately the same value in order to effect codeposition. [Pg.392]

Concentration Control. Sequestration, solubilization, and buffering depend on the concentration control feature of chelation. Traces of metal ions are almost universally present in Hquid systems, often arising from the materials of the handling equipment if not introduced by the process materials. Despite very low concentrations, some trace metals produce undesirable effects such as coloration or instabiHty. [Pg.392]

Buffering. If addition or removal of an appreciable amount of a metal ion produces only a relatively small change in the concentration of that ion is a solution, the solution is buffered with respect to the ion. Metal ions are buffered by chelants of various strengths, ie, stabiHty constants, in a manner exactiy analogous to the buffering of hydrogen ions by bases of various strengths. [Pg.392]

Citric acid is utilized in a large variety of food and industrial appHcations because of its unique combination of properties. It is used as an acid to adjust pH, a buffer to control or maintain pH, a chelator to form stable complexes with multivalent metal ions, and a dispersing agent to stabilize emulsions and other multiphase systems (see Dispersants). In addition, it has a pleasant, clean, tart taste making it useful in food and beverage products. [Pg.185]

Medical Uses. Citric acid and citrate salts are used to buffer a wide range of pharmaceuticals at their optimum pH for stabiUty and effectiveness (65—74). Effervescent formulations use citric acid and bicarbonate to provide rapid dissolution of active ingredients and improve palatabiUty. Citrates are used to chelate trace metal ions, preventing degradation of ingredients. Citrates are used to prevent the coagulation of both human and animal blood in plasma and blood fractionation. Calcium and ferric ammonium citrates are used in mineral supplements. [Pg.185]

Cosmetics and Toiletries. Citric acid and bicarbonate are used in effervescent type denture cleansers to provide agitation by reacting to form carbon dioxide gas. Citric acid is added to cosmetic formulations to adjust the pH, act as a buffer, and chelate metal ions preventing formulation discoloration and decomposition (213—218). [Pg.186]

D. D. Perrin and B. Dempsey, Buffers for pH and Metal Ion Control, Chapman and Hall, London, 1974. [Pg.49]

Heavy metal contamination of pH buffers can be removed by passage of the solutions through a Chelex X-100 column. For example when a solution of 0.02M HEPES [4-(2-HydroxyEthyl)Piperazine-l-Ethanesulfonic acid] containing 0.2M KCl (IL, pH 7.5) alone or with calmodulin, is passed through a column of Chelex X-100 (60g) in the K" " form, the level of Ca ions falls to less than 2 x 10" M as shown by atomic absorption spectroscopy. Such solutions should be stored in polyethylene containers that have been washed with boiling deionised water (5min) and rinsed several times with deionised water. TES [, N,N, -Tetraethylsulfamide] and TRIS [Tris-(hydroxymethyl)aminomethane] have been similarly decontaminated from metal ions. [Pg.54]

Scheme VIII has the form of Scheme II, so the relaxation time is given by Eq. (4-15)—appjirently. However, there is a difference between these two schemes in that L in Scheme VIII is also a participant in an acid-base equilibrium. The proton transfer is much more rapid than is the complex formation, so the acid-base system is considered to be at equilibrium throughout the complex formation. The experiment can be carried out by setting the total ligand concentration comparable to the total metal ion concentration, so that the solution is not buffered. As the base form L of the ligand undergoes coordination, the acid-base equilibrium shifts, thus changing the pH. This pH shift is detected by incorporating an acid-base indicator in the solution. Scheme VIII has the form of Scheme II, so the relaxation time is given by Eq. (4-15)—appjirently. However, there is a difference between these two schemes in that L in Scheme VIII is also a participant in an acid-base equilibrium. The proton transfer is much more rapid than is the complex formation, so the acid-base system is considered to be at equilibrium throughout the complex formation. The experiment can be carried out by setting the total ligand concentration comparable to the total metal ion concentration, so that the solution is not buffered. As the base form L of the ligand undergoes coordination, the acid-base equilibrium shifts, thus changing the pH. This pH shift is detected by incorporating an acid-base indicator in the solution.
This shows that the pM value of the solution is fixed by the value of K and the ratio of complex-ion concentration to that of the free ligand. If more of M is added to the solution, more complex will be formed and the value of pM will not change appreciably. Likewise, if M is removed from the solution by some reaction, some of the complex will dissociate to restore the value of pM. This recalls the behaviour of buffer solutions encountered with acids and bases (Section 2.20), and by analogy, the complex-ligand system may be termed a metal ion buffer. [Pg.53]

A. Direct titration. The solution containing the metal ion to be determined is buffered to the desired pH (e.g. to PH = 10 with NH4-aq. NH3) and titrated directly with the standard EDTA solution. It may be necessary to prevent precipitation of the hydroxide of the metal (or a basic salt) by the addition of some auxiliary complexing agent, such as tartrate or citrate or triethanolamine. At the equivalence point the magnitude of the concentration of the metal ion being determined decreases abruptly. This is generally determined by the change in colour of a metal indicator or by amperometric, spectrophotometric, or potentiometric methods. [Pg.311]

B. Back-titration. Many metals cannot, for various reasons, be titrated directly thus they may precipitate from the solution in the pH range necessary for the titration, or they may form inert complexes, or a suitable metal indicator is not available. In such cases an excess of standard EDTA solution is added, the resulting solution is buffered to the desired pH, and the excess of the EDTA is back-titrated with a standard metal ion solution a solution of zinc chloride or sulphate or of magnesium chloride or sulphate is often used for this purpose. The end point is detected with the aid of the metal indicator which responds to the zinc or magnesium ions introduced in the back-tit ration. [Pg.311]

This colour change can be observed with the ions of Mg, Mn, Zn, Cd, Hg, Pb, Cu, Al, Fe, Ti, Co, Ni, and the Pt metals. To maintain the pH constant (ca 10) a buffer mixture is added, and most of the above metals must be kept in solution with the aid of a weak complexing reagent such as ammonia or tartrate. The cations of Cu, Co, Ni, Al, Fe(III), Ti(IV), and certain of the Pt metals form such stable indicator complexes that the dyestuff can no longer be liberated by adding EDTA direct titration of these ions using solochrome black as indicator is therefore impracticable, and the metallic ions are said to block the indicator. However, with Cu, Co, Ni, and Al a back-titration can be carried out, for the rate of reaction of their EDTA complexes with the indicator is extremely slow and it is possible to titrate the excess of EDTA with standard zinc or magnesium ion solution. [Pg.317]


See other pages where Metal ion buffers is mentioned: [Pg.387]    [Pg.98]    [Pg.573]    [Pg.722]    [Pg.690]    [Pg.517]    [Pg.517]    [Pg.387]    [Pg.98]    [Pg.573]    [Pg.722]    [Pg.690]    [Pg.517]    [Pg.517]    [Pg.1167]    [Pg.222]    [Pg.533]    [Pg.385]    [Pg.522]    [Pg.279]    [Pg.12]    [Pg.381]    [Pg.388]    [Pg.391]    [Pg.392]    [Pg.48]    [Pg.2063]    [Pg.2212]    [Pg.121]    [Pg.7]    [Pg.501]    [Pg.463]    [Pg.147]    [Pg.53]   
See also in sourсe #XX -- [ Pg.248 , Pg.252 ]

See also in sourсe #XX -- [ Pg.298 , Pg.343 ]




SEARCH



Metal buffering

Metallic buffers

Uses of metal-ion buffers

© 2024 chempedia.info