Blends multicomponent

As more complex multicomponent blends are being developed for commercial appHcations, new approaches are needed for morphology characterization. Often, the use of RuO staining is effective, as it is sensitive to small variations in the chemical composition of the component polymers. For instance PS, PC, and styrene—ethylene/butylene—styrene block copolymers (SEES) are readily stained, SAN is stained to a lesser degree, and PET and nylons are not stained (158,225—228). 

Principal component analysis has been used in combination with spectroscopy in other types of multicomponent analyses. For example, compatible and incompatible blends of polyphenzlene oxides and polystyrene were distinguished using Fourier-transform-infrared spectra (59). Raman spectra of sulfuric acid/water mixtures were used in conjunction with principal component analysis to identify different ions, compositions, and hydrates (60). The identity and number of species present in binary and tertiary mixtures of polycycHc aromatic hydrocarbons were deterrnined using fluorescence spectra (61). 

Synthetic polymers have become extremely important as materials over the past 50 years and have replaced other materials because they possess high strength-to-weight ratios, easy processabiUty, and other desirable features. Used in appHcations previously dominated by metals, ceramics, and natural fibers, polymers make up much of the sales in the automotive, durables, and clothing markets. In these appHcations, polymers possess desired attributes, often at a much lower cost than the materials they replace. The emphasis in research has shifted from developing new synthetic macromolecules toward preparation of cost-effective multicomponent systems (ie, copolymers, polymer blends, and composites) rather than preparation of new and frequendy more expensive homopolymers. These multicomponent systems can be "tuned" to achieve the desired properties (within limits, of course) much easier than through the total synthesis of new macromolecules. 

Conducting Polymer Blends, Composites, and Colloids. Incorporation of conducting polymers into multicomponent systems allows the preparation of materials that are electroactive and also possess specific properties contributed by the other components. Dispersion of a conducting polymer into an insulating matrix can be accompHshed as either a miscible or phase-separated blend, a heterogeneous composite, or a coUoidaHy dispersed latex. When the conductor is present in sufftcientiy high composition, electron transport is possible. 

There are several approaches to the preparation of multicomponent materials, and the method utilized depends largely on the nature of the conductor used. In the case of polyacetylene blends, in situ polymerization of acetylene into a polymeric matrix has been a successful technique. A film of the matrix polymer is initially swelled in a solution of a typical Ziegler-Natta type initiator and, after washing, the impregnated swollen matrix is exposed to acetylene gas. Polymerization occurs as acetylene diffuses into the membrane. The composite material is then oxidatively doped to form a conductor. Low density polyethylene (136,137) and polybutadiene (138) have both been used in this manner. 

Very little work has been done in this area. Even electrolyte transport has not been well characterized for multicomponent electrolyte systems. Multicomponent electrochemical transport theory [36] has not been applied to transport in lithium-ion electrolytes, even though these electrolytes consist of a blend of solvents. It is easy to imagine that ions are preferentially solvated and ion transport causes changes in solvent composition near the electrodes. Still, even the most sophisticated mathematical models [37] model transport as a binary salt. 

The single-component bacterial vaccines are listed in Table 15.1. For each vaccine, notes are provided of the basic material fkm which the vaccine is made, the salient production processes and tests for potency and for safety. The multicomponent vaccines that are made by blending together two or more of the single component vaccines are required to meet the potency and safety requirements for each of the single components that they contain. The best known of the combined bacterial vaccines is the adsorbed diphtheria, tetanus and pertussis vaccine (DTPerWac/Ads) that is used to immunize infants, and the adsorbed diphtheria and tetanus vaccine (DTWac/Ads) that is used to reinforce the immunity of school entrants. 

Steps 5 and 6 involved the characterization and optimization of multicomponent capsules based on blends containing up to four polyelectrolytes, often in the presence of a gelling agent or surface coating. While these results are part of the overall objective of this project, they are beyond the scope of this paper and will be reported elsewhere [61,62]. 

The preceding discussion can be used as a guide for rational selection of multicomponent polymer blends used for encapsulation, or as a basis for interpreting our findings. 

Table 2 indicates that the most suitable capsular membranes comprised semi-or non-transparent systems. Generally, the multicomponent blending resulted in smooth capsules with the exception of the alginate/spermine-polymethylene-co-guanidine systems which were either irregularly shaped or mosaic. There was no correlation observed between the capsule turbidity and permeability. 

It is the intent of this doeument to define the terms most commonly encountered in the field of polymer blends and eomposites. The scope has been limited to mixtures in which the eomponents differ in ehemical composition or molar mass or both and in which the continuous phase is polymeric. Many of the materials described by the term multiphase are two-phase systems that may show a multitude of finely dispersed phase domains. Hence, incidental thermodynamic descriptions are mainly limited to binary mixtures, although they can be and, in the scientific literature, have been generalized to multicomponent mixtures. Crystalline polymers and liquid-crystal polymers have been considered in other documents [1,2] and are not discussed here. 

From its nature, a flavour is defined as a multicomponent blend of volatiles, non-volatiles and complex raw materials which is responsible for the final product properties. In flavour production, the volume-dominated operation units are mixing processes of liquids and dry blends. 

---