Battelle

D. F. Feller, MSRC Ah Initio Methods Benchmark Suite—A Measurement of Hardware and Software Performance in the Area of Electronic Structure Methods WA Battelle Pacific Northwest Labs, Richland (1993). 

Pacihc Northwest National Laboratory 902 Battelle Blvd. 

In oaken battels, slow evaporation of water and alcohol through the staves is ordinarily compensated for by refilling and topping each battel by... 

UNISHALE B. The UNISHALE process, like the Paraho process, uses lump feed and countercurrent flows, and can be operated ia either the DH or IH mode. The UNISHALE B process is an IH process that uses hot recycled gas as the heat-transport medium (Fig. 6). The unique feature of the UNISHALE processes is the rock pump. The soflds move upward through the retort as the vapors are moving downward. The rock pump was used ia the UNISHALE technology at Parachute, Colorado to produce more than 0.64 x 10 m (four million battels) of cmde shale oil. Operations were shut down in 1991. 

Fig. 11. Crimp terminal contigurations (a) straight battel, 90° tongue, where wine without insulation is crimped in the battel, (b) Open battel having insulation-piercing lances, (c) Nylon or poly(vinyl chloride) preinsulated terminal accommodating and supporting wine insulation. Wine without end insulation is insetted in the terminal and is crimped. The terminal sleeve is not broken but conforms to the shape of the crimp indent, (d) Quick disconnect...

Ltindgren, Regina E., Risk Communication A Handbook for Communicating Environmental, Safety, and Health Risks, Battelle Press, Columbus, 1994. 

Bert, C.W., Mills, E.J., Gideon, D.N., and Stein, R.A., Preliminary Survey on Hypervelocity-Impact Properties of Plastics and Plastic Laminates, Battelle Memorial Institute Special Report, Columbus, OH, 24 pp., June 1963. 

Oscarson, J.H. and Graff, K.F., Summary Report on Spall Fracture and Dynamic Response of Materials, Battelle Memorial Institute Report No. BAT-197A-4-3, Columbus, OH, 37 pp., March 1968. 

Golovin, M.N., Technical Literature on the Decomposition of Polymethylmethacrylate (PM MSA), Part I, Battelle-Columbus Laboratories Report No. R-6059, Columbus, OH, October 1980. 

Current and Future Materials Usage in Aircraft Gas Turbine Engines, Metals and Ceramics Information Center, Battelle Laboratories, 505 King Avenue, Columbus, Ohio 43201, USA. 

Locklin. D. W., Hazard, H. R., Bloom, S. G., and Nack, H., Power Plant Utilization of Coal, A Battelle Energy Program Report, Battelle Memorial Institute, Columbus, Ohio, September 1974. 

As a result of development work between the Battelle Institute in Frankfurt and a German candle-making company, Aetema, biodegradable cellulose acetate compounds have been available since 1991 from the Rhone-Poulenc subsidiary Tubize Plastics. They are marketed under the trade names Bioceta and Biocellat. The system is centred round the use of an additive which acts both as a plasticiser and a biodegrading agent, causing the cellulose ester to decompose within 6-24 months. 

It appears that HIP was independently invented, also in 1955, at the Battelle Memorial Institute in Columbus, Ohio, under contract to the Atomic Energy Commission and with the immediate objective of bonding nucelar fuel elements with precise dimensional control. 

SOPHIE Selection of Procedures For Hazard Identification and Evaluation Battelle Columbus Division 505 King Avenue Columbus, OH 43201-2693 (614) 424-6424 Assists users with selection of methods to employ for identifying and evaluating hazards in chemical and petrochemical facilities. 

Sirciegic Enviroiimcfirul Health and Safey Maxiagcrocnt (S M) http //w ww. estd. battelle org/sehs m/... 

Dr. Richard Walentowicz provided the EPA CD-ROM disk entitled Exposure Models Library and Integrated Model Evaluation System" with other reference material. Lester Wittenberg of the Center for Chemical Process Safety, AIChE was particularly helpful in providing a chenncal industry perspective and reference material as was Dr. Steven Arendt of JBF Associates, Inc. Drs. David Hesse of Battelle Columbus Laboratories and Vinod Mubayi of Brookhaven National Laboratory were very helpful in providing material on the chemical consequence codes. 

Bryeui R. Noton, Integrated Computer-Aided Manufacturing Cost/Design Guides for Airframes and Electronics, Battelle s Columbus Laboratories, Columbus, Ohio, undated. 

Battelle (Seifert and Giesbrecht 1986) and BASF (Stock 1987) each conducted studies on exploding fuel jets, the former on natural gas and hydrogen jets, and the latter on propane jets. The methane and hydrogen jet program covered subcritical outflow velocities of 140, 190, and 250 m/s and orifice diameters of 10, 20, 50, and 100 mm. In the propane jet program, outflow conditions were supercritical with orifice diameters of 10, 20, 40, 60, and 80 mm. The jets were started and ignited after they had achieved steady-state conditions. 

Schildknecht, M. 1984. Versuche zur Freistrahlzondung von Wasserstoff-Luft-Gemischen im Hinblick auf den Ubergang Deflagration-Detonation, report BIeV-R-65.769-1, Battelle Institut e.V., Frankfurt, West Germany. 

This report is by Battelle Columbus Division to the Line Pipe Research Supervisory Committee of the American Gas Association. It presents an analysis of statistical data obtained from reports of lea)c or rupture (service) incidents and test failures in natural gas transmission and gathering lines over the 14.5 year period from 1970 through June, 1984. All gas transmission companies were required to notify the Office of Pipeline Safety Operations in the event of a "reportable" incident, as defined by the Code of Federal Regulations. The purpose of the study is to organize the reportable incident data into a meaningful format from which the safety record of the industry can be assessed. 

Battelle Columbus Division, Guidelines for Hazard Evaluation Procedures, The Center for Chemical Process Safety, AICliE, New York, NY, 1985. 

Areas with annual o /erags wind speeds of 13 mph or greater are found throughout the United States. Regions with Class 4 winds are considered adractive for Aind turbine siting. (Developed by Battelle Pacific Northwest Laboratories for the U.S. Department of Energy)... 

Miller, K. B. Matchett, J. M. Purcell, C. W. and Turner, M. H. (1995). Strategies for Managing Ozone-Depleting Refrigerants, Confronting the Future. Columbus, OH Battelle Press. 

Battelle-Columbus Division and Synergic Resources Corporation. 1984. Demoud-Side Monigenient, Evohudon ofAkenutivcs. Palo Alto, CA Electric Power Research Institute and Edison Electric Institute. 

---