Moisture atmospheric

Corrosion fatigue is a type of failure (cracking) which occurs when a metal component is subjected to cyclic stress in a corrosive medium. In many cases, relatively mild environments (e.g., atmospheric moisture) can greatly enhance fatigue cracking without producing visible corrosion. 

Freshly distilled ethyl formate must be used. Commercial ethyl formate may be purified as follows. Allow the ethyl formate to stand for 1 hour with 16 per cent, of its weight of anhydrous potassium carbonate with occasional shaking. Decant the ester into a dry flask containing a little fresh anhydrous potassium carbonate and allow to stand for a further hour. Filter into a di flask and distil through an efficient fractionating column, and collect the fraction, b.p. 53-54° protect the receiver from atmospheric moisture. 

Phenyl isocyanate is a colourless liquid, b.p. 164° or 55°/13 mm. its vapour is lacluymatory. The liquid reacts readily with water, yielding diphenyl urea, m.p. 241°, and hence must be protected from atmospheric moisture ... 

Iodine monochlorlde may be prepared as follows. Pass dry chlorine into 127 g. of iodine contained in a 125 ml. distilling flask until the weight has increased by 34-6 g. The chlorine should be led in at or below the surface of the iodine whilst the flask is gently shaken it is essential to have an excess of iodine. Distil the iodine chloride in an ordinary distillation apparatus use a filter flask, protected from atmospheric moisture by a calcium chloride (or cotton wool) guard tube, as a receiver. Collect the fraction b.p. 97-105° the jdeld is 140 g. Preserve the iodine monochloride in a dry, glass-stoppered bottle. 

A wide variety of capsules loaded with water-immiscible or water-iasoluble materials have been prepared by complex coacervation. Capsule size typically ranges from 20—1000 p.m, but capsules outside this range can be prepared. Core contents usually are 80—95 wt %. Complex coacervation processes are adversely affected by active agents that have finite water solubiUty, are surface-active, or are unstable at pH values of 4.0—5.0. The shell of dry complex coacervate capsules is sensitive to variations ia atmospheric moisture content and becomes plasticized at elevated humidities. 

Although neither inflammable nor self-igniting, sodium peroxide is highly inflammable when mixed with oxidi2able substances. Such mixtures bum violendy, even ia the absence of air. Tme sodium peroxocarbonates can be formed under the influence of atmospheric moisture and carbon dioxide. At temperatures >50° C and when exposed to pressure or friction, these peroxocarbonates can decompose and generate flame. 

Unlike common commercial dianhydrides such as PMDA and BTDA, bis(ether anhydride)s possess moderate reactivity toward nucleophiles because of the electron-donating property of the ether groups. Bis(ether anhydtide)s are hardly affected by atmospheric moisture. The stabiUty and generally better solubiUty of bis(ether anhydtide)s provide significant advantages in manufacturing operations. 

Subsequent dehydrohalogenation afforded exclusively the desired (Z)-olefin of the PGI2 methyl ester. Conversion to the sodium salt was achieved by treatment with sodium hydroxide. The sodium salt is crystalline and, when protected from atmospheric moisture and carbon dioxide, is indefinitely stable. A variation of this synthesis started with a C-5 acetylenic PGF derivative and used a mercury salt cataly2ed cyclization reaction (219). Although natural PGI has not been identified, the syntheses of both (6R)- and (65)-PGl2, [62777-90-6] and [62770-60-7], respectively, have been described, as has that of PGI3 (104,216). 

Shipment and Storage. 2-Pyrrohdinone is available in steel dmms and in aluminum or stainless-steel tank cars and tank trailers. Because of its high freezing point, bulk shipments are in tanks with heating coils. Heating with hot water rather than steam avoids product discoloration. Steel (qv), stainless steel, and aluminum are satisfactory materials for storage containers. Because 2-pyrrohdinone is hygroscopic, it must be protected from atmospheric moisture. 

Shipment, Stora.ge, ndPrice. l-Methyl-2-pyrrohdinone is available in tank cars or tank trailers as well as in dmms. Shipping containers are normally of unlined steel. Rubber hose is unsuitable for handling standard steel pipe or braided steel hose is acceptable. Ordinarily 1020 carbon steel (0550) is satisfactory as a storage material. Stainless-steel 304 and 316, nickel, and aluminum are also suitable. MethylpyrroHdinone is hygroscopic and must be protected from atmospheric moisture. In September 1994, NMP was Hsted at 3.89/kg. 

Polyurethane sealant formulations use TDI or MDI prepolymers made from polyether polyols. The sealants contain 30—50% of the prepolymer the remainder consists of pigments, fiUers, plastici2ers, adhesion promoters, and other additives. The curing of the sealant is conducted with atmospheric moisture. One-component windshield sealants utili2e diethyl malonate-blocked MDI prepolymers (46). Several polyurethane hybrid systems, containing epoxies, siUcones, or polysulfide, are also used. 

Surfa.cta.nt-TypeAntista.ts, Inherently conductive antistats have the advantage of not being dependent on atmospheric moisture to function. Thek drawbacks include expense, coloration of the plastic, and alteration of the mechanical properties of the plastic. The added stiffness caused by conductive fillers may not be a problem with a rigid container, but it can be a problem for a flexible bag. 

Since surfactant-type antistats function by attracting atmospheric moisture to the plastic, the relative humidity (rh) has a significant effect on antistat performance (Fig. 6). Relative humidity also has an effect on charge generation (Table 7). 

Barium also presents a hydrogen explosion ha2ard if allowed to come iato contact with water or atmospheric moisture, and must always be kept dry and preferably sealed ia the shipping containers. 

Beryllium carbide slowly hydroly2es to beryllium oxide and methane in the presence of atmospheric moisture although months may be requited to complete the reaction. Any carbon contained in beryllium metal is present as the carbide because the solubiUty of carbon in beryllium is extremely low. 

A solution of sulfur trioxide [7446-11-9] dissolved in chlorosulfonic acid [7990-94-5] CISO H, has been used as a smoke (U.S. designation FS) but it is not a U.S. standard agent (see Chlorosulfuric acid Sulfuric acid and sulfur trioxide). When FS is atomized in air, the sulfur trioxide evaporates from the small droplets and reacts with atmospheric moisture to form sulfuric acid vapor. This vapor condenses into minute droplets that form a dense white cloud. FS produces its effect almost instantaneously upon mechanical atomization into the atmosphere, except at very low temperatures. At such temperatures, the small amount of moisture normally present in the atmosphere, requires that FS be thermally generated with the addition of steam to be effective. FS can be used as a fill for artillery and mortar shells and bombs and can be effectively dispersed from low performance aircraft spray tanks. FS is both corrosive and toxic in the presence of moisture, which imposes limitations on its storage, handling, and use. 

As a therapeutic agent, ch oline is adininistered orally in the form of symps or elixers containing the chloride, citrates or bitartrate, or in the form of compressed tablets or capsules of the dihydrogen citrate. Choline is also given in small doses as a nutritional supplement in combination with a variety of other materials. In dry pharmaceutical-dosage forms, the dihydrogen citrate is usually preferred because of its lower tendency to absorb atmospheric moisture. Both salts have been used parenteraHy. 

Tanks with contents at lower than atmospheric temperature may require insulation to minimize heat absorption. The insulation must have a vapor barrier at the outside to prevent condensation of atmospheric moisture from reducing its effectiveness. An insulation not damaged by moisture is preferable. The insulation techniques presently used for refrigerated systems can be apphed (see subsection Fow-Temperature and Cryogenic Storage ). 

The confinement of the cracks to a specific area of the cooler suggests that condensate from atmospheric moisture initially formed in this area and dissolved a corrodent from the atmosphere such as ammonia, sulfur dioxide, or oxides of nitrogen. Since the previous cooler had been in service for 20 years, it is conjectured that the rapid failure of this exchanger was due principally to very high bending stresses, which may have been induced during construction of the cooler. 

---