Groups ether

Analysis There are four ether groups, but they are peripheral and easily made. The key FG is the amide which we must discoimect first at the C-N bond. Both acid and amine could be made from the same nitrile. 

Synthesis of allenic alcohols hy 1., 2-substitution of chlorine on ether groups by hydride... 

The hydroxyl groups can be alkylated in the usual manner. Hydroxyalkyl ethers may be prepared with alkylene oxides and chloromethyl ethers by reaction with formaldehyde and hydrogen chloride (86). The terminal chlorides can be easily converted to additional ether groups. 

Applications. Table 12 Hsts crop-protection chemicals and pharmaceuticals containing the aryl fluoroaLkyl ether group. 

Another process employs a pH maintained at 4—7 and a catalyst that combines a divalent metal cation and an acid. Water is removed continuously by azeotropic distillation and xylene is recycled. The low water content increases the reaction rate. The dibenzyl ether groups are decomposed by the acid the yield of 2,2 -methylene can be as high as 97% (34). 

Unlike common commercial dianhydrides such as PMDA and BTDA, bis(ether anhydride)s possess moderate reactivity toward nucleophiles because of the electron-donating property of the ether groups. Bis(ether anhydtide)s are hardly affected by atmospheric moisture. The stabiUty and generally better solubiUty of bis(ether anhydtide)s provide significant advantages in manufacturing operations. 

In the presence of cationic initiators, the possibiUty for loss of pendant ether groups to form free alcohol is another side reaction that usually results in color formation because of the highly conjugated products formed. 

Epoxy Resins. Epoxy resins (qv) are used to cross-link other resins with amine, hydroxyl, and carboxyHc acid (or anhydride) groups. The epoxy group, properly called an oxkane, is a cycHc three-membered ether group. By far the most widely used epoxy resins in coatings are bisphenol A (BPA) (4,4 -(l-methylethyHdene)bisphenol) [80-05-7] epoxy resins. 

Semicrystalline Polyimides. Semicrystalline polyimides containing carbonyl and ether groups have been synthesized by the group at the NASA Langley Research Center (37). One such material, designated LARC-CPI, which is an acronym for Langley Research Center—Crystalline Polyimide,... 

Three selective methods to remove protective groups are receiving much attention assisted, electrolytic, and photolytic removal. Four examples illustrate assisted removal of a protective group. A stable allyl group can be converted to a labile vinyl ether group (eq. 4) a /3-haloethoxy (eq. 5) or a /3-silylethoxy (eq. 6) derivative is cleaved by attack at the /3-substituent and a stable o-nitro-phenyl derivative can be reduced to the o-amino compound, which undergoes cleavage by nucleophilic displacement (eq. 7) ° ... 

CH3CN H20 (4 1), HgCl2, 24 h, 90-94% yield. The methylthiomethyl ether group can be removed in the presence of the phenylthiomethyl ether. ... 

This has led to chemical modification of the polyesters, in particular the introduction of allyl ether groups into the resins. Amongst the monomers figuring prominently in the literature are allyl glyceryl ether I, trimethylolpropane diallyl ether II (1,1-diallyloxypropanol) and pentaerythritol triallyl ether III (2,2,2-trial-lyloxyethanol), as shown in Figure 25.32. 

Hydroxyisophthalic acid has been prepared by oxidizing 2-hydroxy-3-methylbenzoic acid with lead dioxide, by cleaving the ether group of 2-methoxyisophthalic acid with hydriodic acid, and by hydrolyzing 2-iodoisophthalic acid with alcoholic sodium hydroxide. ... 

The C(ls) and 0(ls) spectra of polyphenylene ether (PPE) before and after evaporation of chromium onto the surface are shown in Fig. 23. C(ls) spectra of neat PPE consisted of two components, near 284.6 and 286.0 eV, that were assigned to carbon atoms in the benzene and methyl groups and in the ether groups, respectively. The 0(ls) spectrum consisted of a single peak, near 533.4 eV, that was assigned to the ether oxygen atoms. After evaporation of chromium, a new peak related to formation of Cr202 was observed near 531.0 eV. 

The UV cure system contains an epoxy or a vinyl ether functionalized PDMS polymer and a photo catalyst [36]. This latter, a diaryliodonium salt is photolyti-cally decomposed to form an active acid that polymerizes the epoxy or vinyl ether groups and crosslinks the network. 

Schaub ° introduced methyl groups at both the 16a- and 17a-positions by 1,4-addition of methylmagnesium iodide to the A -20-ketone (8) followed by methylation of the intermediate 16a-methyl-17-enolate anion (9) with methyl iodide. After hydrolysis of the tetrahydropyranyl ether group a 40% yield of the 16,17-dimethyl derivative (10) was obtained. With the corresponding 3j -acetoxy derivative, the yield of (10) is only 20%. 

Values in parentheses arc yields of fluorinated cyclic ethers without pendant ether group (OR t)... 

---