Aryl triflates arylation

Phenanthro- Aryl triflates, aryl Stabilization of Pd(1, allows coupling at [116]... 

The order of reactivity of the aryl electrophiles in Pd-catalyzed cyanation is as follows aryl iodides > aryl triflates > aryl bromides > aryl chlorides. The lower the reactivity of the... 

Aryl triflates, aryl bromides, aryl iodides... 

The evolution of new variations of transition metal catalyzed cross couplings, the only area in which "... are there new reactions waiting to be discovered...", [62] will undoubtedly also play a significant role in synthetic aromatic chemistry. Three such methods are currently under study in our laboratories (Scheme 21) aryl O-carbamate and aryl triflate - aryl Grignard (Methods a and b), [63] aryl 0-thiocarbamate - aryl Grignard (Method c), [64] and aryl triflate - aryl zinc (Method d) [65]. A selected example for each method is shown. These processes, which may all be linked to DoM, will allow ehancement of current technology (Scheme 14) and contemplation of conceptually new ways for aryl - aryl bond formation. 

The alkaloid dubamine contains a single bond between the two heteroarene units. This lond was formed in 79% yield by the generally valuable palladium-catalyzed eoupling of an ryltrimethylstannane with an aryl triflate (see section 1.6). The requisite stannane was pre-ared from l,3-benzodioxol-5-yl triflate and hexamethyldistannane with the same palladium atalyst, the triflate ester was obtained from 2(1 f/)-quinolinone and trifluoromethanesulfonic jihydride (A.M. Echavarren, 1987). An earlier attempt to perform this aryl coupling by dassical means gave a yield of only 1 %. 

The most useful pseudo-halides are aryl triflates (trifluoromethylsulfonates) of phenols and enol triflates derived from carbonyl compounds[4,5,6]. 

An Q-arylalkanoate is prepared by the reaction of aryl halide or triflate with the ketene silyl acetal 74 as an alkene component. However, the reaction is explained by transmetallation of Ph - Pd—Br with 74 to generate the Pd eno-late 75, which gives the a-arylalkanoate by reductive elimination[76]. 

The reaction of a halide with 2-butene-1,4-diol (104) affords the aldehyde 105, which is converted into the 4-substituted 2-hydroxytetrahydrofuran 106, and oxidized to the 3-aryl-7-butyrolactone 107[94], Asymmetric arylation of the cyclic acetal 108 with phenyl triflate[95] using Pd-BINAP afforded 109, which was converted into the 3-phenyllactone 110 in 72% ee[96]. Addition of a molecular sieve (MS3A) shows a favorable effect on this arylation. The reaction of the 3-siloxycyclopentene 111 with an alkenyl iodide affords the. silyl... 

Allylic amines are coupled to halides giving either allylic amines or enamines depending on the reaction condition. Reaction of steroidal dienyl triflate with Boc-diprotected allylamine affords allylamine. Use of AcOK as a base is crucial for the clean coupling[102]. The tert-allylic amine 123 reacts with an aryl halide to give the enamine 125 in DMF and allylic amine 124 in nonpolar solvents[103]. 

The alkenyloxirane 126 in excess reacts with aryl and alkenyl halides or triflates in the presence of sodium formate to afford the allylic alcohol 127[104], Similarly, the reaction of the alkenyloxetane 128 gives the homo-allylic alcohol 130[105]. These reactions can be explained by insertion of the double bond in the Ar—Pd bond, followed by ring opening (or /3-eliraination) to form the allylic or homoallylic alkoxypalladium 129, which is converted into the allylic 127 or homoallylic alcohol 130 by the reaction of formate. The 3-alkenamide 132 was obtained by the reaction of the 4-alkenyl-2-azetizinone 131 with aryl iodide and sodium formate [106]. 

Allenes also react with aryl and alkenyl halides, or triflates, and the 7r-allyl-palladium intermediates are trapped with carbon nucleophiles. The formation of 283 with malonate is an example[186]. The steroid skeleton 287 has been constructed by two-step reactions of allene with the enol trillate 284, followed by trapping with 2-methyl-l,3-cyclopentanedione (285) to give 286[187]. The inter- and intramolecular reactions of dimethyl 2,3-butenylmalonate (288) with iodobenzene afford the 3-cyclopentenedicarboxylate 289 as a main product) 188]. 

The formation of disubstituted alkynes by coupling of terminal alkynes, followed by intramolecular attack of an alcohol or amine, is used for the preparation of benzofurans and indoles. The benzo[il)]furan 356 can be prepared easily by the reaction of o-iodophenol with a terminal alkyne[262]. The 2-substituted indole 358 is prepared by the coupling of 2-ethynylaniline (357) with aryl and alkenyl halides or triflates, followed by Pd(ll)-catalyzed cycliza-tion[263]. 

Pyrrole derivatives are prepared by the coupling and annulation of o-iodoa-nilines with internal alkynes[291]. The 4-amino-5-iodopyrimidine 428 reacts with the TMS-substituted propargyl alcohol 429 to form the heterocondensed pyrrole 430, and the TMS is removed[292]. Similarly, the tryptophane 434 is obtained by the reaction of o-iodoaniline (431) with the internal alkyne 432 and deprotection of the coupled product 433(293]. As an alternative method, the 2,3-disubstituted indole 436 is obtained directly by the coupling of the o-alky-nyltrifluoroacetanilide 435 with aryl and alkenyl halides or triflates(294]. 

Carbonylation of enol triflates derived from ketones and aldehydes affords Q,/)-unsaturated esters[332]. Steroidal esters are produced via their aryl and enol triflates[328]. The enol triflate in 477 is more reactive than the aryl tritlate and the carbonylation proceeds stepwise. First, carbonylation of the enol triflate affords the amide 478 and then the ester 479 is obtained in DMSO using dppp[333]. 

Carboxylic acids are produced in water. Selection of solvents is crucial and the carbonylation of the enol triflate 480 can be carried out in aqueous DMF, and that of the aryl triflate 481 in aqueous DMSO using dppf as a ligand[328,334]. The carbonylation of the enol triflate 482 to form the a, 0. unsaturated acid 483 using dppf as a ligand in aqueous DMF has been applied in the total synthesis of multifunctionalized glycinueclepin[335]. 

The carbonyiation of o-diiodobenzene with a primary amine affords the phthalimide 501 [355,356]. Carbonyiation of iodobenzene in the presence of (9-diaminobenzene (502) and DBU or 2,6-lutidine affords 2-phenylbenzimida-zole (503)[357, The carbonyiation of aryl iodides in the presence of pentaflnor-oaniline affords 2-arylbenzoxazoles directly, 2-Arylbenzoxazole is prepared indirectly by the carbonyiation of (9-aminophenol[358j. The optically active aryl or alkenyl oxazolinc 505 is prepared by the carbonyiation of the aryl or enol triflates in the presence of the opticaly active amino alcohol 504, followed by treatment with thionyl chloride[359]. 

Aldehydes can also be prepared by the carbonylation of aryl and alkenyl halides and triflate, and benzyl and allyl chlorides using tin hydride as a hydride source and Pd(PhjP)4 as a catalyst[377]. Hydrosilancs arc used as another hydride source[378]. The arenediazonium tetralluoroborate 515 is converted into a benzaldehyde derivative rapidly in a good yield by using Et ,SiH or PH MS as the hydride source[379]. 

The aryl- and heteroarylfluorosilanes 541 can be used for the preparation of the unsymmetrical ketones 542[400], Carbonylation of aryl triflate with the siloxycyclopropane 543 affords the 7-keto ester 545. In this reaction, transme-tallation of the siloxycyclopropane 543 with acylpalladium and ring opening generate Pd homoenolate as an intermediate 544 without undergoing elimination of/3-hydrogen[401],... 

The carbonylation of aryl iodides in the presence of terminal alkynes affords the acyl alkynes 565. Bidentate ligands such as dppf give good results. When PhjP is used, phenylacetylene is converted into diphenylacetylene as a main product[4l5]. Triflates react similarly to give the alkynyl ketones 566[4I6], In... 

Aryl halides react with a wide variety of aryl-, alkenyl- and alkylstan-nanes[548-550]. Coupling of an aryl tritlate with an arylstannane is a good preparative method for diaryls such as 688. The coupling of alkenylstannanes with alkenyl halides proceeds stereospecifically to give conjugated dienes 689. The allylstannane 690 is used for allylation[397,546,551-553]. Aryl and enol triflates react with organostannanes smoothly in the presence of LiCl[554]. 

The intramolecular coupling of organostannanes is applied to macrolide synthesis. In the zearalenone synthesis, no cyclization was observed between arylstannane and alkenyl iodide. However, intramolecular coupling take.s place between the alkenylstannane and aryl iodide in 706. A similar cyclization is possible by the reaction of the alkenylstannane 707 with enol triflate[579]. The coupling was applied to the preparation of the bicyclic 1,3-diene system 708[580]. 

For coupling, the cheaper aryl fluorosulfonate 713 is used as an alternative to the expensive aryl triflates to give the same results[473]. The arenesulfonates 714 are active for the reaction with vinylstannanes when dppp and LiCI are used in DMSO[583], The bromide 715 attacks the arylstannane moiety selectively without reacting with the organoboron moiety in 716 in the absence of a base[584]. 

The arylation of the i-tributyistannyl glycai 717 offers a synthetic route to chaetiacandin[585,586]. The Pd-catalyzed reactions of the 3-stannylcyclobute-nedione 718 with iodobenzene, and benzoyl chloride[S87], and alkenylation with alkenyl(phenyl)iodonium triflates proceed smoothly by the co-catalysis by Cul[588,589],... 

Aryl, heteroaryl, and alkenyl cyanides are prepared by the reaction of halides[656-658] or triflates[659,660] with KCN or LiCN in DMF, HMPA, and THF. Addition of crown ethers[661] and alumina[662] promotes efficient aryl and alkenyl cyanation. lodobenzene is converted into benzonitrile (794) by the reaction of trimethylsiiyl cyanide in EtiN as a solvent. No reaction takes place with aryl bromides and chlorides[663]. The reaction was employed in an estradiol synthesis. The 3-hydroxy group in 796 was derived from the iodide 795 by converting it into a cyano group[664]. 

Hydrogenolysis of aryl and alkenyl halides and triflates proceeds by the treatment with various hydride sources. The reaction can be explained by the transmetallation with hydride to form palladium hydride, which undergoes reductive elimination. Several boro hydrides are used for this purpose[680], Deuteration of aromatic rings is possible by the reaction of aryl chlorides with NaBD4681]. 

The enone 807 is converted into the dienol triflatc 808 and then the conjugated diene 809 by the hydrogenolysis with tributylammonium for-mate[689,690]. Naphthol can be converted into naphthalene by the hydrogenolysis of its triflate 810[691-693] or sulfonates using dppp or dppf as a ligand[694]. Aryl tetrazoyl ether 811 is cleaved with formic acid using Pd on carbon as a catalyst[695]. 

Tandem cyclization/3-substitution can be achieved starting with o-(trifluoro-acetamido)phenylacetylenes. Cyclization and coupling with cycloalkenyl trif-lates can be done with Pd(PPh3)4 as the catalyst[9]. The Pd presumably cycles between the (0) and (II) oxidation levels by oxidative addition with the triflate and the reductive elimination which completes the 3-alkenylation. The N-protecting group is removed by solvolysis under the reaction conditions, 3-Aryl groups can also be introduced using aryl iodides[9]. 

Indoles with carbocyclic halogen or triflate substituents are potential starting materials for vinylation, arylation and acylation via palladium-catalysed pro-cesses[l]. Indolylstannanes. indolylzinc halides and indolylboronic acids are also potential reactants. The principal type of substitution which is excluded from such coupling reactions is alkylation, since saturated alkyl groups tend to give elimination products in Pd-catalysed processes. 

Highly unstable vinyl cations, generated in situ from vinyl triflates have also been arylated (the triflate group is replaced by the aromatics) to give vinyl aromatics under Friedel-Crafts conditions (28). 

CoupDng of ongarxjtin reagents (and Pd catalyst) with aryl or vinyl haiidas or triflates, acyl chlorides or allyl acetates. 

Abbreviations Aik, alkyl AN, acetonitrile Ar, aryl Bu, butyl cod, 1,5-cyclooctadiene Cp, cy-clopentadienyl Cp , pentamethylcyclopentadienyl Cy, cyclohexyl dppm, diphenylphosphinome-thane dpme, Ph2PC2H4PMe2 Et, ethyl fod, 6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octane-dionate HOMO, highest occupied molecular orbital LUMO, lowest unoccupied molecular orbital Me, methyl MO, molecular orbital nbd, norbornadiene Nuc, nucleophile OTf, triflate Ph, phenyl Pr, propyl py, pyridine THE, tetrahydrofuran TMEDA V,V,M,M-tetramethylethylenediamine. 

Transition metal-catalyzed synthesis of hetarylamines and hetaryl ethers from triflates and aryl/hetaryl halides or heterocyclic amines 98AG(E)2046. 

The Stille coupling of an aryl triflate normally calls for the addition of at least one equivalent of LiCl. Presumably, the transmetallation is facilitated by replacing triflate with CP at the palladium intermediate generated from oxidative addition. As Stille demonstrated in 1988, 4-quinolinyl triflate 100 was coupled with phenylstannane 101 in the presence of Pd(Ph3P)4 and LiCl in refluxing 1,4-dioxane to furnish biaryl 102, which was used as an intermediate for the first total synthesis of antibiotic amphimedine (88JA4051). 

---