Aryl bromide, reactions

Indoles, pyrroles, and carbazoles are themselves suitable substrates for palladium-catalyzed amination. An initial study of this reaction using DPPF-ligated palladium as the catalyst showed that these reactions occurred readily with electron-poor aryl halides. With unactivated aryl bromides, reactions with pyrrole or indole resulted in good yields, but reaction times were long and a temperature of 120 °C was required. Thus, an improved catalyst system was necessary to make the reaction more general and amenable to temperature- or base-sensitive substrates. 

The use of ferrocene-based ligands such as 3 and PPFA (8) result in the formation of catalysts that extended the scope of the arylation reaction to more difficult transformations [37,38,56]. For example, di-n-butylamine could now be effectively coupled with electronically neutral as well as electron-deficient aryl bromides. Reaction of 4-ferf-butylbromobenzene with di-n-butylamine with the ( )-BlNAP/Pd- or DPPF/Pd-based catalysts resulted in significant amounts of terf-butylbenzene formation, however the use of ligands 3 and 8 resulted in formation of the desired product in excellent yield, Eq. (25). 

Examples of the formylation of aryl halides with synthesis gas catalyzed by palladium complexes are summarized in Equation 19.90. These reactions relied upon the development of ligands with particular steric and electronic properties. The dia-damantyl-n-butyl phosphine shown in the equation, in combination with palladium acetate, leads to the formation of aromatic aldehydes in high yields from electron-rich and electron-poor aryl bromides. Reactions of nitroarenes and 2-bromopyridine provided the aldehydes in low yield, but other examples occurred in satisfactor) yield with only 0.1-0.75 mol % catalyst. The identity of the base is important in this process, and TMEDA was the most effective base. The mechanism of this process was not proposed in the initial work, but is likely to occur by oxidative addition of the aryl halide, insertion of the carbon monoxide into the palladium-aryl bond, and a combination of hydrogenolysis of the acyl intermediate and elimination of hydrogen halide to regenerate palladium(O). The base would then be involved in the hydrogenol5 sis and consumption of hydrogen halide. 

Aryl, heteroaryl, and alkenyl cyanides are prepared by the reaction of halides[656-658] or triflates[659,660] with KCN or LiCN in DMF, HMPA, and THF. Addition of crown ethers[661] and alumina[662] promotes efficient aryl and alkenyl cyanation. lodobenzene is converted into benzonitrile (794) by the reaction of trimethylsiiyl cyanide in EtiN as a solvent. No reaction takes place with aryl bromides and chlorides[663]. The reaction was employed in an estradiol synthesis. The 3-hydroxy group in 796 was derived from the iodide 795 by converting it into a cyano group[664]. 

A Pd-cataly2ed reaction of amines with halides is expected, but actually little is known about the reaction. The CDE ring system of lavendamycin (805) has been constructed by the intramolecular reaction of aryl bromide with aniline derivative in 804, but 1.2 equiv, of Pd(Ph3P)4 is required[679]. 

Another method for the hydrogenoiysis of aryl bromides and iodides is to use MeONa[696], The removal of chlorine and bromine from benzene rings is possible with MeOH under basic conditions by use of dippp as a ligand[697]. The reduction is explained by the formation of the phenylpalladium methoxide 812, which undergoes elimination of /i-hydrogen to form benzene, and MeOH is oxidized to formaldehyde. Based on this mechanistic consideration, reaction of alcohols with aryl halides has another application. For example, cyclohex-anol (813) is oxidized smoothly to cyclohexanone with bromobenzene under basic conditions[698]. 

The allylstannane 474 is prepared by the reaction of allylic acetates or phosphates with tributyltin chloride and Sml2[286,308] or electroreduction[309]. Bu-iSnAlEt2 prepared in situ is used for the preparation of the allylstannane 475. These reactions correspond to inversion of an allyl cation to an allyl anion[3l0. 311], The reaction has been applied to the reductive cyclization of the alkenyl bromide in 476 with the allylic acetate to yield 477[312]. Intramolecular coupling of the allylic acetate in 478 with aryl bromide proceeds using BuiSnAlEti (479) by in situ formation of the allylstannane 480 and its reaction with the aryl bromide via transmetallation. (Another mechanistic possibility is the formation of an arylstannane and its coupling with allylic... 

Sandmeyer reaction using cop per(l) bromide is applicable to the conversion of primary arylamines to aryl bromides... 

Sandmeyer reaction (Section 22 17) Reaction of an aryl dia zonium ion with CuCl CuBr or CuCN to give respec tively an aryl chloride aryl bromide or aryl cyanide (nitrile)... 

Aryl bromides were also perfluoroethylated under these conditions [205] The key to improved yields was the azeotropic removal of water from the sodium perfluoroalkylcarboxylate [205] Partial success was achieved with sodium hepta-fluorobutyrate [204] Related work with halonaphthalene and anthracenes has been reported [206 207] The main limitation of this sodium perfluoroalkylcarboxylate methodology is the need for 2 to 4 equivalents of the salt to achieve reasonable yields A trifluoromethylcopper solution can be prepared by the reaction of bis(tri-fluoromethyl)mercury with copper powder in /V-methylpyrrolidone (NMP) at 140 °C [208] (equation 138) or by the reaction of N-trifluoromethyl-A-nitro-sotnfluoromethane sulfonamide with activated copper in dipolar aprotic solvents [209] This trifluoromethylcopper solution can be used to trifluoromethylate aro matic [209], benzylic [209], and heterocyclic halides [209]... 

Bromoquinolines behave in the Suzuki reaction similarly to simple carbocyclic aryl bromides and the reaction is straightforward. Examples include 3-(3-pyridyl)quinoline (72) from 3-bromoquinoline (70) and 3-pyridylboronic acid (71) (91JOC6787) and 3-phenyl-quinoline 75 from substituted 3,7-dibromoquinoline 73 and (2-pivaloylaminophenyl)boronic acid 74 (95SC4011). Notice that the combination of potassium carbonate and ethanol resulted in debromination at the C(7) position (but the... 

Cradally, dais allows orgatiozitic reagents to be prepared from less reactive aryl bromides and secondary or tertiary alkyl bromides.. Alternatively, orgatiozitic iodides can be prepared by means of a paliadiurniOj-catalyzed reaction between alkyl iodides and Et2Zn iSdaeme 2.25) [53-56],... 

For the in situ preparation of the required arenediazonium salt from an aryl amine by application of the diazotization reaction, an acid HX is used, that corresponds to the halo substituent X to be introduced onto the aromatic ring. Otherwise—e.g. when using HCl/CuBr—a mixture of aryl chloride and aryl bromide will be obtained. The copper-(l) salt 2 (chloride or bromide) is usually prepared by dissolving the appropriate sodium halide in an aqueous solution of copper-(ll) sulfate and then adding sodium hydrogensulfite to reduce copper-(ll) to copper-(1). Copper-(l) cyanide CuCN can be obtained by treatment of copper-(l) chloride with sodium cyanide. 

Saito has recently reported high yields and enantioselectivities in aziridine synthesis through reactions between aryl- or vinyl-substituted N-sulfonyl imines and aryl bromides in the presence of base and mediated by a chiral sulfide 122 (Scheme 1.41) [66]. Aryl substituents with electron-withdrawing and -donating groups gave modest transxis selectivities (around 3 1) with high enantioselectiv-... 

Palladium(II) complexes provide convenient access into this class of catalysts. Some examples of complexes which have been found to be successful catalysts are shown in Scheme 11. They were able to get reasonable turnover numbers in the Heck reaction of aryl bromides and even aryl chlorides [22,190-195]. Mechanistic studies concentrated on the Heck reaction [195] or separated steps like the oxidative addition and reductive elimination [196-199]. Computational studies by DFT calculations indicated that the mechanism for NHC complexes is most likely the same as that for phosphine ligands [169], but also in this case there is a need for more data before a definitive answer can be given on the mechanism. 

The palladium-catalyzed cross-coupling of alkenylsilanols has been extensively studied with respect to the structure of both the silicon component and the acceptor halide. The preferred catalyst for coupling of aryl iodides is Pd(dba)2 and for aryl bromides it is [allylPdCl]2. The most effective promoter is tetrabutylammonium fluoride used as a 1.0M solution in THF. In general the coupling reactions occur under mild conditions (room temperature, in 10 min to 12 hr) and some are even exothermic. 

Pd/P(t-Bu)., in the presence of Cy2NMe, is an unusually mild and versatile catalyst for Heck reactions of aryl chlorides (Tables 1 and 2) (as well as for room-temperature reactions of aryl bromides).21 22 23 Example A, the coupling of chlorobenzene with butyl methacrylate, illustrates the application of this method to the stereoselective synthesis of a trisubstituted olefin a-methylcinnamic acid derivatives are an important family of compounds that possess biological activity (e.g., hypolipidemic24 and antibiotic25) and serve as intermediates in the synthesis of pharmaceuticals (e.g., Sulindac, a non-steroidal anti-inflammatory drug26). Example B, the coupling of 4-chlorobenzonitrile with styrene, demonstrates that Pd/P(t-Bu). can catalyze the Heck reaction of activated aryl chlorides at room temperature. 

A microwave-assisted Cu-catalyzed Sonogashira-type protocol on aryl iodide substrates without the involvement of a palladium catalyst has also been published (Scheme 54) [71]. Reactions were executed using Cut and CS2CO3 in NMP at 195 °C. The application seems to be fairly limited since there are indications that only (hetero)arylacetylenes are suitable coupHng partners for this protocol. In addition, aryl bromides react more sluggishly than aryl iodides. Moreover, even on aryl iodides the reaction times required are on the order of hours. 

This is a problem that has been reported by several researchers in other cya-nation methods on heteroaromatic halides. (Hetero)aryl chlorides have also been tackled via in situ halogen exchange to (hetero)aryl bromides followed by sequential cyanation (Scheme 71). For this microwave-assisted process an equimolar amount of NiBr2 and a two-fold excess of NaCN were used. The only heteroaromatic chloride tested was 2-chloropyridine. Although the procedures described involve the use of significant amounts of nickel salts, a clear advantage is that the reactions can be performed in air. Moreover, the cyanat-ing reagents are easily removed since they are water soluble. 

Microwave-assisted Heck reaction of (hetero)aryl bromides with N,N-dimethyl-2-[(2-phenylvinyl)oxy]ethanamine, using Herrmann s palladacycle as a precatalyst, yielded the corresponding /3-(hetero)arylated Heck products in a good EjZ selectivity (Scheme 79) [90]. The a/yd-regioselectivity can be explained by the chelation control in the insertion step. This selectivity is better than 10/90 when no severe steric hindrance is introduced in the (hetero)aryl bromides. The process does not require an inert atmosphere. There is evidence that a Pd(0)/Pd(II)- and not Pd(II)/Pd(IV)-based catalytic cycle is involved. Similarly, other j6-amino-substituted vinyl ethers such as... 

Independently, Antane reported that arylisonipecotic acids were obtained from aryl bromides in a two-step process involving microwave-assisted palladium-catalyzed amination with ethyl isonipecotate followed by ester hydrolysis with KOH (Scheme 91) [96]. Interestingly, toluene, which is the standard solvent for Buchwald-Hartwig aminations under conventional heating, was used as the sole reaction medium, although it is a very weak... 

Such arylations are characterized by a general order of leaving group ability in which the bromine is better than chlorine and much more than fluorine. Therefore, such catalytic reactions seem to be well adapted for a synthetic use of aryl bromides. 

It has also proved possible to close larger rings in this manner 8 and even 12-membered. Triarylamines have been prepared in a similar manner from Arl and Ar NLi, even with unactivated Arl. In the Goldberg reaction, an aryl bromide reacts with an acetanilide in the presence of K2CO3 and Cul to give an N-acetyl-diarylamine, which can be hydrolyzed to a diarylamine ArBr-I- Ar NHAc—> ArAr NAc. ... 

We investigated the catalytic performance of the CU2O coated copper nanoparticles for Ullmann coupling reactions. When the coupling reactions using aryl bromides such as 2-... 

Regarding bis-NHC chelating ligands, several structures that differ in the motifs used for the enlargement of the tether have been proposed as catalysts for the Mizoroki-Heck reaction. They range from non-functionalised aliphatic chains [23-25] to phenyl [26], biphenyl [27], binaphthyls [28] and to chains containing additional coordination positions like ethers [29], amines [30], and pyridines in an evolution towards pincer complexes [31-35], In most cases, the activity of aryl bromides in Mizoroki-Heck transformations was demonstrated to be from moderate to high, while the activation of chlorides was non-existent or poor (Scheme 6.7). 

---