Aromaticity and Reactivity

Chemical Composition. Chemical compositional data iaclude proximate and ultimate analyses, measures of aromaticity and reactivity, elemental composition of ash, and trace metal compositions of fuel and ash. All of these characteristics impact the combustion processes associated with wastes as fuels. Table 4 presents an analysis of a variety of wood-waste fuels these energy sources have modest energy contents. 

Despite its unsaturated nature, benzene with its sweet aroma, isolated by Michael Faraday in 1825 [1], demonstrates low chemical reactivity. This feature gave rise to the entire class of unsaturated organic substances called aromatic compounds. Thus, the aromaticity and low reactivity were connected from the very beginning. The aromaticity and reactivity in organic chemistry is thoroughly reviewed in the book by Matito et al. [2]. The concepts of aromaticity and antiaromaticity have been recendy extended into main group and transition metal clusters [3-10], The current chapter will discuss relationship among aromaticity, stability, and reactivity in clusters. 

Tetrazoles exhibit qualities of acids, bases, acceptors of hydrogen bonds (cf. Section 6.07.4.5), and polydentate ligands (cf. Section 6.07.5.3.4). NH-LJnsubstituted tetrazoles behave both as substrates and intermediates in transacylation processes (cf. Section 6.07.5.4), etc. Tetrazolate anions (tetrazolides) possess high aromaticity and reactivity toward electrophilic reagents (cf. Sections 6.07.4.1 and 6.07.5.3.2). The thermal and photochemical decomposition of tetrazoles involves formation of nitrenes and other intermediates of high reactivity (cf. Sections 6.07.5.2 and 6.07.5.7) These properties provide a possibility of use tetrazoles as catalysts in chemical and biochemical reactions. 

Jiang, Y. and Zhang, H. (1990). Aromaticities and Reactivities Based on Energy Partitioning. Pure < AppLChem., 62,451-456. 

Very recently Chattaraj and Giri [87] using various conceptual DFT based global reactivity indicators investigated the changes in the bonding, aromaticity, and reactivity behavior associated with the reaction cycle,... 

Very recently we have communicated on the role of the 5f orbitals in bonding, aromaticity, and reactivity of planar isocyclic and heterocyclic uranium clusters [185]. Using electronic structure calculation methods (DFT) we demonstrated that the model planar isocyclic cjc/o-U X (n = 3, 4 X = 0,NH) and heterocyclic cjc/o-U (/u.2-X) (n = 3, 4 X = C, CH, NH) clusters are thermodynamically stable molecules with respect to their dissociation either to free U and X moieties or to their monomeric UX species. The equilibrium geometries of the cyclo- J X and cyclo-U iJ,2-X) clusters are shown in Fig.42. 

Tsipis AC, Kefalidis CE, Tsipis CA (2008) The role of the 5f orbitals in bonding, aromaticity, and reactivity of planar isocycUc and heterocyclic uranium clusters. J Am Chem Soc 130 9144-9155... 

Duley, S. Giri, S. Chakraborty, A. Chattaraj, P. K. Bonding, aromaticity and reactivity patterns in some ah-metal and non-metal clusters. J. Chem. Sci., (S. K. Rangarajan Special Issue), 2009,121, 849. 

More recently, the two main characteristics of the phosphole ring (i.e. low aromaticity and reactivity of the P-atom) have been extensively exploited for the molecular engineering of new u-conjugated molecular materials for opto-elec-tronic purposes [32—40]. Many so-caUed small molecules and polymers incorporating phosphole moieties have been prepared (Fig. 11.2), and the study of their... 

Hammen equation A correlation between the structure and reactivity in the side chain derivatives of aromatic compounds. Its derivation follows from many comparisons between rate constants for various reactions and the equilibrium constants for other reactions, or other functions of molecules which can be measured (e g. the i.r. carbonyl group stretching frequency). For example the dissociation constants of a series of para substituted (O2N —, MeO —, Cl —, etc.) benzoic acids correlate with the rate constant k for the alkaline hydrolysis of para substituted benzyl chlorides. If log Kq is plotted against log k, the data fall on a straight line. Similar results are obtained for meta substituted derivatives but not for orthosubstituted derivatives. 

In this section, we illustrate the applicability of the model to some important special cases, and summarize the relationship between aromaticity and chemical reactivity, expressed in the properties of transition states. 

The results of the derivation (which is reproduced in Appendix A) are summarized in Figure 7. This figure applies to both reactive and resonance stabilized (such as benzene) systems. The compounds A and B are the reactant and product in a pericyclic reaction, or the two equivalent Kekule structures in an aromatic system. The parameter t, is the reaction coordinate in a pericyclic reaction or the coordinate interchanging two Kekule structures in aromatic (and antiaromatic) systems. The avoided crossing model [26-28] predicts that the two eigenfunctions of the two-state system may be fomred by in-phase and out-of-phase combinations of the noninteracting basic states A) and B). State A) differs from B) by the spin-pairing scheme. 

When large concentrations of water are added to the solutions, nitration according to a zeroth-order law is no longer observed. Under these circumstances, water competes successfully with the aromatic for the nitronium ions, and the necessary condition for zeroth-order reaction, namely that all the nitronium ions should react with the aromatic as quickly as they are formed, no longer holds. In these strongly aqueous solutions the rates depend on the concentrations and reactivities of the aromatic compound. This situation is reminiscent of nitration in aqueous nitric acid in which partial zeroth-order kinetics could be observed only in the reactions of some extremely reactive compounds, capable of being introduced into the solution in high concentrations ( 2.2.4). 

The most notable studies are those of Ingold, on the orienting and activating properties of substituents in the benzene nucleus, and of Dewar on the reactivities of an extensive series of polynuclear aromatic and related compounds ( 5.3.2). The former work was seminal in the foundation of the qualitative electronic theory of the relationship between structure and reactivity, and the latter is the most celebrated example of the more quantitative approaches to the same relationship ( 7.2.3). Both of the series of investigations employed the competitive method, and were not concerned with the kinetics of reaction. 

The significance of establishing a limiting rate of reaction upon encounter for mechanistic studies has been pointed out ( 2.5). In studies of reactivity, as well as settii an absolute limit to the significance of reactivity in particular circumstances, the experimental observation of the limit has another dependent importance if further structural modification of the aromatic compound leads ultimately to the onset of reaction at a rate exceeding the observed encounter rate then a new electrophile must have become operative, and reactivities established above the encounter rate cannot properly be compared with those measured below it. 

The selectivity relationship merely expresses the proportionality between intermolecular and intramolecular selectivities in electrophilic substitution, and it is not surprising that these quantities should be related. There are examples of related reactions in which connections between selectivity and reactivity have been demonstrated. For example, the ratio of the rates of reaction with the azide anion and water of the triphenylmethyl, diphenylmethyl and tert-butyl carbonium ions were 2-8x10 , 2-4x10 and 3-9 respectively the selectivities of the ions decrease as the reactivities increase. The existence, under very restricted and closely related conditions, of a relationship between reactivity and selectivity in the reactions mentioned above, does not permit the assumption that a similar relationship holds over the wide range of different electrophilic aromatic substitutions. In these substitution reactions a difficulty arises in defining the concept of reactivity it is not sufficient to assume that the reactivity of an electrophile is related... 

Nitration in sulphuric acid is a reaction for which the nature and concentrations of the electrophile, the nitronium ion, are well established. In these solutions compounds reacting one or two orders of magnitude faster than benzene do so at the rate of encounter of the aromatic molecules and the nitronium ion ( 2.5). If there were a connection between selectivity and reactivity in electrophilic aromatic substitutions, then electrophiles such as those operating in mercuration and Friedel-Crafts alkylation should be subject to control by encounter at a lower threshold of substrate reactivity than in nitration this does not appear to occur. 

It is the purpose of this and the following chapter to report the quantitative data concerning the relationship of structure to orientation and reactivity in aromatic nitration. Where data obtained by modern analytical methods are available they are usually quoted in preference to the results of older work. Many of the papers containing the latter are, however, noted in the brief discussion which is given of interpretations of the results. 

Reactions of aromatic and heteroaromatic rings are usually only found with highly reactive compounds containing strongly electron donating substituents or hetero atoms (e.g. phenols, anilines, pyrroles, indoles). Such molecules can be substituted by weak electrophiles, and the reagent of choice in nature as well as in the laboratory is usually a Mannich reagent or... 

The balance between aromatic and aUphatic reactivity is affected by the type of substituents on the ring. Furan functions as a diene in the Diels-Alder reaction. With maleic anhydride, furan readily forms 7-oxabicyclo [2.2.1]hept-5-ene-2,3-dicarboxyhc anhydride in excellent yield [5426-09-5] (4). 

The conversion of aromatic monomers relative to C-5—C-6 linear diolefins and olefins in cationic polymerizations may not be proportional to the feedblend composition, resulting in higher resin aromaticity as determined by nmr and ir measurements (43). This can be attributed to the differing reactivity ratios of aromatic and aHphatic monomers under specific Lewis acid catalysis. Intentional blocking of hydrocarbon resins into aromatic and aHphatic regions may be accomplished by sequential cationic polymerization employing multiple reactors and standard polymerization conditions (45). 

Hydrocarbons, compounds of carbon and hydrogen, are stmcturally classified as aromatic and aliphatic the latter includes alkanes (paraffins), alkenes (olefins), alkynes (acetylenes), and cycloparaffins. An example of a low molecular weight paraffin is methane [74-82-8], of an olefin, ethylene [74-85-1], of a cycloparaffin, cyclopentane [287-92-3], and of an aromatic, benzene [71-43-2]. Cmde petroleum oils [8002-05-9], which span a range of molecular weights of these compounds, excluding the very reactive olefins, have been classified according to their content as paraffinic, cycloparaffinic (naphthenic), or aromatic. The hydrocarbon class of terpenes is not discussed here. Terpenes, such as turpentine [8006-64-2] are found widely distributed in plants, and consist of repeating isoprene [78-79-5] units (see Isoprene Terpenoids). 

In contrast, aromatic ketones are high boiling, colorless Hquids that generally have a fragrant odor and are almost insoluble in water. They are useful as intermediates in chemical manufacture. Functionalized and cycHc ketones are also good solvents. Ring size and the type and location of functional groups affect odor, color, and reactivity of these ketones. 

The aromatic ring of a phenoxy anion is the site of electrophilic addition, eg, in methylolation with formaldehyde (qv). The phenoxy anion is highly reactive to many oxidants such as oxygen, hydrogen peroxide, ozone, and peroxyacetic acid. Many of the chemical modification reactions of lignin utilizing its aromatic and phenoHc nature have been reviewed elsewhere (53). 

Chemical Properties and Reactivity. LLDPE is a saturated branched hydrocarbon. The most reactive parts of LLDPE molecules are the tertiary CH bonds in branches and the double bonds at chain ends. Although LLDPE is nonreactive with both inorganic and organic acids, it can form sulfo-compounds in concentrated solutions of H2SO4 (>70%) at elevated temperatures and can also be nitrated with concentrated HNO. LLDPE is also stable in alkaline and salt solutions. At room temperature, LLDPE resins are not soluble in any known solvent (except for those fractions with the highest branching contents) at temperatures above 80—100°C, however, the resins can be dissolved in various aromatic, aUphatic, and halogenated hydrocarbons such as xylenes, tetralin, decalin, and chlorobenzenes. 

Resonance effects are the primary influence on orientation and reactivity in electrophilic substitution. The common activating groups in electrophilic aromatic substitution, in approximate order of decreasing effectiveness, are —NR2, —NHR, —NH2, —OH, —OR, —NO, —NHCOR, —OCOR, alkyls, —F, —Cl, —Br, —1, aryls, —CH2COOH, and —CH=CH—COOH. Activating groups are ortho- and para-directing. Mixtures of ortho- and para-isomers are frequently produced the exact proportions are usually a function of steric effects and reaction conditions. 

Although it has been reported (138) that decolorization of wastewater containing reactive azo dyes with sodium hydrosulfite is possible only to a limited extent, others have demonstrated good reduction (decolorization). For example, using zinc hydrosulfite for the decolorization of dyed paper stock (139) resulted in color reduction of 98% for azo direct dyes (139). A Japanese patent (140) describes reducing an azo reactive dye such as Reactive Yellow 3 with sodium hydrosulfite into its respective aromatic amines which ate more readily adsorbable on carbon than the dye itself. This report has been confirmed with azo acid, direct, and reactive dyes (22). 

J. H. Ridd, Acc. Chem. Res. 4 248 (1971) J. H. Ridd, in Studies on Chemical Structure and Reactivity, J. H. Ridd, ed., John Wiley Sons, New Vbik, 1966, Chapter 7 J. G. Hoggett, R. B. Moodie, J. R. Penton, and K. Schofield, Nitration and Aromatic Reactivity, Cambridge University Press, Cambridge, 1971 K. Schofield, Aromatic Nitration, Cambridge University Press, Cambridge, 1980 G. A. Olah, R. Malhotra, and S. C. Narang, Nitration, Methods and Mechanisms, VCH Publishers, New i)rk, 1989. 

---