Antimony elements

The development of neutron activation analysis (NAA) as a sensitive and specific method of trace elemental analysis led to its application during the 1950 s for the detection of firearm discharge residue. Its ability to detect and identify very low concentrations of barium and antimony, elements associated with most primer compositions, was encouraging. 

Antimony Antimony BIxk Antimony, elemental Antimony, metallic Antimony powder Antimony, regulus Antymon Cl 77050 EINECS 231-146-5 HSDB 508 Regulus of antimony Stibium Stibium metallicum UN2871. Hardening alloy for lead, bearing metal, type metal, solder, collapsible tubes and foil, sheet and pipe, semiconductor technology, pyrotechnics. mpn630" bp = 1635" d =... 

Each of these elements occurs naturally as a sulphide ore arsenic as realgar As S,, orpiment As, Sg and arsenical pyrites with approximate formula FeAsS antimony as stibnite Sb2S3 and bismuth as B12S3. 

Arsenic and antimony resemble phosphorus in having several allotropic modifications. Both have an unstable yellow allotrope. These allotropes can be obtained by rapid condensation of the vapours which presumably, like phosphorus vapour, contain AS4 and Sb4 molecules respectively. No such yellow allotrope is known for bismuth. The ordinary form of arsenic, stable at room temperature, is a grey metallic-looking brittle solid which has some power to conduct. Under ordinary conditions antimony and bismuth are silvery white and reddish white metallic elements respectively. 

Arsenic dissolves in concentrated nitric acid forming arsenicfV) acid, H3ASO4, but in dilute nitric acid and concentrated sulphuric acid the main product is the arsenic(III) acid, HjAsOj. The more metallic element, antimony, dissolves to form the (III) oxide Sb O, with moderately concentrated nitric acid, but the (V) oxide Sb205 (structure unknown) with the more concentrated acid. Bismuth, however, forms the salt bismulh(lll) nitrate Bi(N03)3. 5H,0. 

A complete set of trihalides for arsenic, antimony and bismuth can be prepared by the direct combination of the elements although other methods of preparation can sometimes be used. The vigour of the direct combination reaction for a given metal decreases from fluorine to iodine (except in the case of bismuth which does not react readily with fluorine) and for a given halogen, from arsenic to bismuth. 

Nitrogen is unusual in forming so many oxides. The acidity of the Group V oxides falls from phosphorus, whose oxides are acidic, through arsenic and antimony whose oxides are amphoteric, to the basic oxide ofbismuth. This change is in accordance with the change from the non-metallic element, phosphorus, to the essentially metallic element, bismuth. The +5 oxides are found, in each case, to be more acidic than the corresponding + 3 oxides. 

Antimony forms both a + 3 and a + 5 oxide. The + 3 oxide can be prepared by the direct combination of the elements or by the action of moderately concentrated nitric acid on antimony. It is an amphoteric oxide dissolving in alkalis to give antimonates(III) (for example sodium antimonite , NaSb02), and in some acids to form salts, for example with concentrated hydrochloric acid the trichloride, SbCl3, is formed. 

Many of these sulphides occur naturally, for example iron(ll) sulphide, FeS (magnetic pyrites), and antimony(III) sulphide, Sb S, (stibnite). They can usually be prepared by the direct combination of the elements, effected by heating, but this rarely produces a pure stoichiometric compound and the product often contains a slight excess of the metal, or of sulphur. 

Bromine has a lower electron affinity and electrode potential than chlorine but is still a very reactive element. It combines violently with alkali metals and reacts spontaneously with phosphorus, arsenic and antimony. When heated it reacts with many other elements, including gold, but it does not attack platinum, and silver forms a protective film of silver bromide. Because of the strong oxidising properties, bromine, like fluorine and chlorine, tends to form compounds with the electropositive element in a high oxidation state. 

Flame letaidancy can be impaited to plastics by incorporating elements such as bromine, chlorine, antimony, tin, molybdenum, phosphoms, aluminum, and magnesium, either duriag the manufacture or when the plastics are compounded iato some useful product. Phosphoms, bromine, and chlorine are usually iacorporated as some organic compound. The other inorganic flame retardants are discussed hereia. 

Two methods are used to measure pH electrometric and chemical indicator (1 7). The most common is electrometric and uses the commercial pH meter with a glass electrode. This procedure is based on the measurement of the difference between the pH of an unknown or test solution and that of a standard solution. The instmment measures the emf developed between the glass electrode and a reference electrode of constant potential. The difference in emf when the electrodes are removed from the standard solution and placed in the test solution is converted to a difference in pH. Electrodes based on metal—metal oxides, eg, antimony—antimony oxide (see Antimony AND ANTIMONY ALLOYS Antimony COMPOUNDS), have also found use as pH sensors (8), especially for industrial appHcations where superior mechanical stabiUty is needed (see Sensors). However, because of the presence of the metallic element, these electrodes suffer from interferences by oxidation—reduction systems in the test solution. 

Rea.ctivity ofLea.d—Ca.lcium Alloys. Precise control of the calcium content is required to control the grain stmcture, corrosion resistance, and mechanical properties of lead—calcium alloys. Calcium reacts readily with air and other elements such as antimony, arsenic, and sulfur to produce oxides or intermetaUic compounds (see Calciumand calciumalloys). In these reactions, calcium is lost and suspended soHds reduce fluidity and castibiUty. The very thin grids that are required for automotive batteries are difficult to cast from lead—calcium alloys. 

Tia is also used as an ahoyiag element ia lead—antimony alloys to improve fluidity and to prevent drossiag, ia lead—calcium alloys to improve mechanical properties and enhance electrochemical performance, ia lead—arsenic alloys to maintain a stable composition, and as an additive to low melting alloys. 

Some elements found in body tissues have no apparent physiological role, but have not been shown to be toxic. Examples are mbidium, strontium, titanium, niobium, germanium, and lanthanum. Other elements are toxic when found in greater than trace amounts, and sometimes in trace amounts. These latter elements include arsenic, mercury, lead, cadmium, silver, zirconium, beryUium, and thallium. Numerous other elements are used in medicine in nonnutrient roles. These include lithium, bismuth, antimony, bromine, platinum, and gold (Eig. 1). The interactions of mineral nutrients with... 

In the days of alchemy and the phlogiston theory, no system of nomenclature that would be considered logical ia the 1990s was possible. Names were not based on composition, but on historical association, eg, Glauber s salt for sodium sulfate decahydrate and Epsom salt for magnesium sulfate physical characteristics, eg, spirit of wiae for ethanol, oil of vitriol for sulfuric acid, butter of antimony for antimony trichloride, Hver of sulfur for potassium sulfide, and cream of tartar for potassium hydrogen tartrate or physiological behavior, eg, caustic soda for sodium hydroxide. Some of these common or trivial names persist, especially ia the nonchemical Hterature. Such names were a necessity at the time they were iatroduced because the concept of molecular stmcture had not been developed, and even elemental composition was incomplete or iadeterminate for many substances. 

Solders are alloys that have melting temperatures below 300°C, formed from elements such as tin, lead, antimony, bismuth, and cadmium. Tin—lead solders are commonly used for electronic appHcations, showing traces of other elements that can tailor the solder properties for specific appHcations. 

The SeBr which forms is distilled from the solution leaving the interfering elements behind. The only other metallic elements that can also distill over by this procedure are arsenic, antimony, tellurium (pardy), and germanium. 

Instead of depending on the thermally generated carriers just described (intrinsic conduction), it is also possible to deUberately incorporate various impurity atoms into the sihcon lattice that ionize at relatively low temperatures and provide either free holes or electrons. In particular. Group 13 (IIIA) elements n-type dopants) supply electrons and Group 15 (VA) elements (p-type dopants) supply holes. Over the normal doping range, one impurity atom supphes one hole or one electron. Of these elements, boron (p-type), and phosphoms, arsenic, and antimony (n-type) are most commonly used. When... 

Zinc smelters use x-ray fluorescence spectrometry to analyze for zinc and many other metals in concentrates, calcines, residues, and trace elements precipitated from solution, such as arsenic, antimony, selenium, tellurium, and tin. X-ray analysis is also used for quaUtative and semiquantitative analysis. Electrolytic smelters rely heavily on AAS and polarography for solutions, residues, and environmental samples. 

---