Basicity aniline

In the case of aniline basicity, comparison of substituent effects in the neutral amine versus those in the charged anilinium ion (Tables 6 and 19) in-... 

On acetylation it gives acetanilide. Nitrated with some decomposition to a mixture of 2-and 4-nitroanilines. It is basic and gives water-soluble salts with mineral acids. Heating aniline sulphate at 190 C gives sulphanilic add. When heated with alkyl chlorides or aliphatic alcohols mono- and di-alkyl derivatives are obtained, e.g. dimethylaniline. Treatment with trichloroethylene gives phenylglycine. With glycerol and sulphuric acid (Skraup s reaction) quinoline is obtained, while quinaldine can be prepared by the reaction between aniline, paraldehyde and hydrochloric acid. 

Various basic substances, such as aromatic amines (naphthyl-amines dissolve with difficulty in dil. HCl, diphenylamine only in cone. HCl, triphenylamine insoluble) nitro-anilines some amino-carboxylic acids. 

Dilute hydrochloric or sulphuric acid finds application in the extraction of basic substances from mixtures or in the removal of basic impurities. The dilute acid converts the base e.g., ammonia, amines, etc.) into a water-soluble salt e.g., ammonium chloride, amine hydrochloride). Thus traces of aniline may be separated from impure acetanilide by shaking with dilute hydrochloric acid the aniline is converted into the soluble salt (aniline hydrochloride) whilst the acetanilide remains unaffected. 

Because of these difficulties, special mechanisms were proposed for the 4-nitrations of 2,6-lutidine i-oxide and quinoline i-oxide, and for the nitration of the weakly basic anilines.However, recent remeasurements of the temperature coefficient of Hq, and use of the new values in the above calculations reconciles experimental and calculated activation parameters and so removes difficulties in the way of accepting the mechanisms of nitration as involving the very small equilibrium concentrations of the free bases. Despite this resolution of the difficulty some problems about these reactions do remain, especially when the very short life times of the molecules of unprotonated amines in nitration solutions are considered... 

The equilibrium shown m the equation lies to the right =10 for proton transfer from the conjugate acid of aniline to cyclohexylamine making cyclohexylamine 1 000 000 times more basic than aniline... 

Conjugation of the ammo group of an arylamme with a second aromatic ring then a third reduces its basicity even further Diphenylamme is 6300 times less basic than aniline whereas triphenylamme is scarcely a base at all being estimated as 10 ° times less basic than aniline and 10 " times less basic than ammonia... 

Just as aniline is much less basic than alkylamines because the unshared electron parr of nitrogen is delocalized into the tt system of the nng p nitroamlme is even less basic because the extent of this delocahzahon is greater and involves the oxygens of the nitro group... 

Hydroperoxide Process. The hydroperoxide process to propylene oxide involves the basic steps of oxidation of an organic to its hydroperoxide, epoxidation of propylene with the hydroperoxide, purification of the propylene oxide, and conversion of the coproduct alcohol to a useful product for sale. Incorporated into the process are various purification, concentration, and recycle methods to maximize product yields and minimize operating expenses. Commercially, two processes are used. The coproducts are / fZ-butanol, which is converted to methyl tert-huty ether [1634-04-4] (MTBE), and 1-phenyl ethanol, converted to styrene [100-42-5]. The coproducts are produced in a weight ratio of 3—4 1 / fZ-butanol/propylene oxide and 2.4 1 styrene/propylene oxide, respectively. These processes use isobutane (see Hydrocarbons) and ethylbenzene (qv), respectively, to produce the hydroperoxide. Other processes have been proposed based on cyclohexane where aniline is the final coproduct, or on cumene (qv) where a-methyl styrene is the final coproduct. 

Vulcanization was first reported in 1839 with the discovery that heating natural mbber with sulfur and basic lead carbonate produced an improvement in physical properties (2). In 1906, aniline was the first organic compound found to have the abiUty to accelerate the reaction of sulfur with natural mbber (3). Various derivatives of aniline were soon developed which were less toxic and possessed increased acceleration activity. 

To minimize the formation of fuhninating silver, these complexes should not be prepared from strongly basic suspensions of silver oxide. Highly explosive fuhninating silver, beheved to consist of either silver nitride or silver imide, may detonate spontaneously when silver oxide is heated with ammonia or when alkaline solutions of a silver—amine complex are stored. Addition of appropriate amounts of HCl to a solution of fuhninating silver renders it harmless. Stable silver complexes are also formed from many ahphatic and aromatic amines, eg, ethylamine, aniline, and pyridine. 

Of the total tar bases in U.K. coke-oven and CVR tars, pyridine makes up about 2%, 2-methyl pyridine 1.5%, 3- and 4-methylpyridines about 2%, and ethylpyridine and dimethylpyridines 6%. Primary bases, anilines and methylanilines, account for about 2% of the bases in coke-oven and CVR tars and 3.5% of the bases in low temperature tars. The main basic components in coke-oven tars are quinoline (16—20% of the total), isoquinoline (4—5%), and methyl quinolines. These dicycHc bases are less prominent in CVR and low temperature tars, in which only a minority of the basic constituents have been identified. 

The first triaryknethane dyes were synthesized on a strictiy empirical basis in the late 1850s an example is fuchsine, which was prepared from the reaction of vinyl chloride with aniline. Thek stmctural relationship to triphenylmethane was estabHshed by Otto and Fmil Fischer (5) with the identification of pararosaniline [569-61-9] as 4,4, 4 -triaminotriphenyknethane and the stmctural elucidation of fuchsine. Several different stmctures have been assigned to the triaryknethane dyes (6—8), but none accounts precisely for the observed spectral characteristics. The triaryknethane dyes are therefore generally considered to be resonance hybrids. However, for convenience, usually only one hybrid is indicated, as shown for crystal violet [548-62-9] Cl Basic Violet 3 (1), for which = 589 nm. 

Methyl violet [8004-87-3] Cl Basic Violet 1 (17), is made by the air oxidation of dimethyl aniline in the presence of salt, phenol, and a copper sulfate catalyst. Initially, some of the dimethyl aniline is oxidized to formaldehyde and /V-methyl aniline under those conditions. The formaldehyde then reacts with dimethyl aniline to produce N,N,]S7,1S7-tetramethyldiaminodiphenylmethane, which is oxidized to Michler s hydrol [119-58-4]. The hydrol condenses with... 

Nitro-l-diazo-2-naphthol-4-sulfonic acid prefers the 2-position in spite of the nitro group, and increasing alkalinity favors ortho coupling with diazophenols. 1-Naphthalenesulfamic acid [24344-19-2] (ArNHSO H) and N-nitro-1-naphthylamine [4323-69-7] (ArNHNO ) couple exclusively in the para position. The substitution of resorcinol [108-46-3] and y -phenylenediamine [108-45-2] is compHcated and has been discussed (29,30). The first azo dyes from aniline, eg. Aniline Yellow [60-09-3] (19) (Cl Solvent Yellow 1 Cl 11000) were manufactured in 1861 and Bismark Brown [10114-58-6] (20) (Cl Basic Brown 1 Cl 21000) appeared in 1863. The reaction is as follows ... 

Basic Orange 1 (130) (aniline coupled to 2,4-diamiaotoluene) and Basic Orange 2 (22) (aniline coupled to y -phenylenediamiae) are examples of amine salt type cationic azo dyes. The cation is formed by protonation under acidic conditions. Under neutral or alkaline conditions, these dyes behave more like disperse dyes. In 1988 the U.S. production of Cl Basic Orange 2 amounted to 132 tons. 

Yields depend on the reactivity of the amines and the choice of reaction conditions, including the choice of copper catalyst. Generally, the reactivity increases with increasing amine basicity. Thus, i7n7-toluidine (pTf = 5.1) reacts four times faster than aniline (pif = 4.7) (27). StericaHy hindered amines such as 3,5-di-amino-2,4,6-trimethylbenzenesulfonic acid react very slowly. 

Ethylene oxide has been produced commercially by two basic routes the ethylene chlorohydrin and direct oxidation processes. The chlorohydrin process was first iatroduced dufing World War I ia Germany by Badische Anilin-und Soda-Eabfik (BASE) and others (95). The process iavolves the reaction of ethylene with hypochlorous acid followed by dehydrochlofination of the resulting chlorohydrin with lime to produce ethylene oxide and calcium chloride. Union Carbide Corp. was the first to commercialize this process ia the United States ia 1925. The chlorohydrin process is not economically competitive, and was quickly replaced by the direct oxidation process as the dominant technology. At the present time, all the ethylene oxide production ia the world is achieved by the direct oxidation process. 

The impurities present in aromatic nitro compounds depend on the aromatic portion of the molecule. Thus, benzene, phenols or anilines are probable impurities in nitrobenzene, nitrophenols and nitroanilines, respectively. Purification should be carried out accordingly. Isomeric compounds are likely to remain as impurities after the preliminary purifications to remove basic and acidic contaminants. For example, o-nitrophenol may be found in samples ofp-nitrophenol. Usually, the ri-nitro compounds are more steam volatile than the p-nitro isomers, and can be separated in this way. Polynitro impurities in mononitro compounds can be readily removed because of their relatively lower solubilities in solvents. With acidic or basic nitro compounds which cannot be separated in the above manner, advantage may be taken of their differences in pK values (see Chapter 1). The compounds can thus be purified by preliminary extractions with several sets of aqueous buffers... 

Non-basic materials, including nitro compounds were removed from aniline in 40% H2SO4 by passing steam through the soln for Ih. Pellets of KOH were added to liberate the aniline which was steam distd, dried with KOH, distd twice from zinc dust at 20mm, dried with freshly prepared BaO, and finally distd from BaO in an allglass apparatus [Few and Smith J Chem Soc 753 7949]. Aniline is absorbed by skin and is TOXIC... 

---