Sodium propionate anhydrous

Anhydrous sodium propionate calcium propionate potassium propionate propionic acid zinc propionate. 

Sodium iactate Sodium phosphate dibasic anhydrous Sodium propionate Sodium succinate Sucrose... 

A mixture of B g (0.0356 mol) of p-(2.2-dichlorocyclopropyl)phenol, 11.2 g (0.2B mol) of sodium hydroxide pellets, 11 g of chloroform and 350 ml of acetone was prepared at 0°C. The cooling bath was removed, the mixture stirred for a minute and then heated on a steam bath to reflux temperature. The reaction mixture was stirred at reflux for three hours and then concentrated in vacuo. The residual gum was partitioned between dilute hydrochloric acid and ether, and the ether layer was separated, dried and concentrated in vacuo. The residual oil (14 g) was partitioned between dilute aqueous sodium bicarbonate and ether. The sodium bicarbonate solution was acidified with concentrated hydrochloric acid and extracted with ether. The ether solution was dried over anhydrous sodium sulfate and concentrated. The residue (9.5 g of yellow oil) was crystallized twice from hexane to give 6.0 g of 2-[p-(2,2-dlchlorocyclopropyDphenoxyl -2-methyl propionic acid in theformof apalecream[Pg.347]

A mixture of 1 gram of 2-hydroxymethylene-dihydrotestosterone, 10 cc of pyridine and 2 cc of propionic anhydride was allowed to react at room temperature for 16 hours and then poured into water. The resulting suspension was heated for 1 hour on the steam bath to hydrolyze the excess of propionic anhydride, cooled and extracted with methylene dichloride. The extract was consecutively washed with dilute hydrochloric acid, sodium bicarbonate solution and water, dried over anhydrous sodium sulfate and evaporated to dryness under vacuum. There was thus obtained the dipropionate of 2-hydroxymethylene-dihydrotestosterone which was treated with hydrogen, in methanol solution. 

Phenoxyphenyl)Propionic Acid A mixture of 223 grams of 2-(3-phenoxyphenyl)-propionitrile and 400 grams of sodium hydroxide in 1,600 ml of 50% ethanol was refluxed with stirring for 72 hours. After cooling to room temperature, the reaction mixture was poured into ice water. The resulting solution was washed with ether, acidifed with concentrated HCI, and extracted with ether. The ether extract was washed with water, dried over anhydrous sodium sulfate, and evaporated to dryness in vacuo. The residual oil was distilled to yield 203.5 grams (84%) of 2-(3-phenoxyphenyl)propionic acid as a viscous oil BP 168° to 171°C (0.11 mm), no = 1,5742. 

Dissolve 2.75 g anhydrous sodium carbonate in a mixture of 50 ml acetic acid and 25 ml propionic acid. Add 11.7 g (0.1M) indole... 

C. 2-(N-Benzyl-N-mesitylenesulfonyl)amino-1-phenyl-1-propyl propionate, 1. To a solution of 3 (15.0 g, 35.4 mmol) and pyridine (3.7 mL, 46 mmol) in dichloromethane (200 mL), propionyl chloride (3.8 mL, 44 mmol) (Note 1) is added dropwise at 0°C. The reaction mixture is stirred at room temperature for 13 hr and diluted with diethyl ether (300 mL). The mixture is washed successively with 100 mL each of water, 1 M HCI, water, saturated sodium hydrogen carbonate solution, and brine, and dried with anhydrous sodium sulfate. The filtered organic solution is concentrated to give a crystalline residue, which is triturated with hexane to give 1 (16.8 g, >99%) (Note 7). 

Carboxy-2-pyridylthio)propionic acids, prepared by the reaction of 2-mercatopyridin-3-carboxylic acid with 3-bromopropionic acid in aqueous KOH, undergo cyclization upon treatment with anhydrous sodium acetate and acetic anhydride to afford 2,3-dihydrothiopyrano[2,3-3]pyridin-4(4//)-ones. These products undergo further reaction with phenylhydrazine to give the phenylhydrazone (isolated) and then Fischer indole cyclization to give novel 5/7,1177-pyrido[2, 3 2,3]thiopyrano[4,3-3]indoles <2000JHC379>. 

The aqueous mother liquors are extracted with methylene chloride (900 ml). The organic phases are combined, washed with water (800 ml) and dried over anhydrous sodium sulfate. After filtration, the filtrate is concentrated to dryness under a pressure of 20 mm Hg to give a semicrystalline paste (65.0 g) which is recrystallised from acetonitrile (550 ml). The crystals are filtered off, and the product recovered (32.0 g) is recrystallised from acetonitrile (600 ml). There is thus obtained 2-[4-(2-carboxyphenyl)aminophenyl]propionic acid (18.4 g) melting point 191°-192°C. 

A mixture of dl-2-[4-(2 -carboxymethyl-4 -methylphenoxy)phenyl]propionic acid (15.3 g) and polyphosphoric acid (92 g) was heated with stirring at 110-120°C for 2 hours. To the reaction mixture was added water and the resulting mixture was extracted with chloroform. The organic layer was washed with water, dried over anhydrous sodium sulfate and concentrated. The residue was chromatographed on silica gel (75 g) using chloroform as an eluent to give a crude product, which was recrystallized from toluene to give the dl-2-(8-methyl-10,ll-dihydro-ll-oxodibenz[b,f]oxepin-2-yl)propionic acid (9.4 g, 65.3%), m.p. 128-129°C. 

The diethyl 2-[3-bis(methoxycarbonyl)methyl-4-nitrophenyl]-2-methylmalonate obtained above,(4.13 g, 9.71 mmol) was dissolved in acetic acid (40 ml). To the solution were added water (16 ml) and concentrated sulfuric acid (4 ml), and the resulting mixture was heated for 15 hours under reflux. The acetic acid was distilled off under reduced pressure. The residue was concentrated under reduced pressure after addition of toluene. The precipitated crystals were collected by filtration and washed with water to give 2.06 g of the desired compound as a pale brown crystalline product. The filtrate and washing were combined and subjected to extraction using ethyl acetate. The ethyl acetate portion was washed successively with water and an aqueous saturated sodium chloride solution, and dried over anhydrous sodium sulfate. The solvent was distilled off under reduced pressure to leave 0.32 g of 2-(3-carboxymethyl-4-nitrophenyl)propionic acid as a yellow crystalline product. The total amount was 2.38 g (yield 96.8%). 

In 2 N hydrochloric acid (0.5 ml) was dissolved 2-(4-amino-3-carboxymethylphenyl)propionic acid disodium salt, 53 mg, 0.2 mmol). Sodium nitrite (14 mg, 0.2 mmol) was added to the resulting solution under stirring and chilling with ice. The mixture was stirred for 30 minutes under chilling with ice. The mixture was then neutralized with a chilled aqueous saturated sodium acetate solution. To the neutralized mixture was added a solution of thiophenol (0.02 ml, 0.2 mmol) in 6 N aqueous sodium hydroxide solution (0.1 ml), and the mixture was stirred for 2 hours at room temperature. The reaction mixture was then made acidic by addition of 2 N hydrochloric acid, and extracted with ethyl acetate. The ethyl acetate portion was extracted with an aqueous saturated sodium hydrogen carbonate solution. The aqueous portion was then made acidic by addition of 6 N hydrochloric acid and extracted with ethyl acetate. The ethyl acetate portion was washed successively with water and an aqueous saturated sodium chloride solution, and dried over anhydrous sodium sulfate. The solvent was distilled off under reduced pressure to give 28 mg (yield 45%) of the 2-(3-carboxymethyl-4-phenylthiophenyl)propionic acid. 

Potassium ethylparaben Potassium metabisulfite Potassium nitrate Potassium propylparaben Potassium sorbate Propionic acid Salicylic acid Sodium acetate anhydrous Sodium benzoate Sodium bisulfite... 

The formation of acyloins (a-hydroxyketones of the general formula RCH(OH)COR, where R is an aliphatic residue) proceeds best by reaction between finely-divided sodium (2 atoms) and esters of aliphatic acids (1 mol) in anhydrous ether or in anhydrous benzene with exclusion of oxygen salts of enediols are produced, which are converted by hydrolysis into acyloins. The yield of acetoin from ethyl acetate is low (ca. 23 per cent, in ether) owing to the accompanying acetoacetic ester condensation the latter reaction is favoured when the ester is used as the solvent. Ethyl propionate and ethyl ji-butyrate give yields of 52 per cent, of propionoin and 72 per cent, of butyroin respectively in ether. 

Heavily fluonnated aminobenzenes, pyridines, and pyrimidines are diazotized in strong-acid media Solid sodium nitrite added directly to the fluonnated amine dissolved in 80% hydrofluonc acid, anhydrous hydrogen fluoride, or (1 1 wt/wt) 98% sulfuric acid in (86 14 wt/wt) acetic and propionic acids affords the electrophilic fluoroarenediazonium ion Addition of an electron rich aromatic to the resultant diazonium solution gives the fluoroareneazo compound [10 II] (equa tions 9 and 10)... 

---