And erosion

Levy A 1995 Solid Partiole Erosion and Erosion-Corrosion of Materials (Materials Park, OH ASM International)... 

M. R. McHenry and B. Laub, Ablative Padome Materials Thermal Ablation and Erosion Modelling (13th Intersociety Conf. on Environmental Systems,... 

Flocculants are also used for soHd—Hquid separations in other industries such as the sugar industry (1). Recent experiments have shown flocculants to be effective soil conditioners for agricultural land, which effectively reduce mn-off and erosion (2). However, they have not been used on a large scale for this appHcation. 

Although thermal performance is a principal property of thermal insulation (13—15), suitabiHty for temperature and environmental conditions compressive, flexure, shear, and tensile strengths resistance to moisture absorption dimensional stabiHty shock and vibration resistance chemical, environmental, and erosion resistance space limitations fire resistance health effects availabiHty and ease of appHcation and economics are also considerations. 

J. Kac2marek, Principles of Machining hy Cutting, Abrasion and Erosion, Peter Peregrinus, Stevenage, U.K., 1976, pp. 487—513. 

Another set of nickel aHoys, which have a high chromium content, a moderate molybdenum content, and some copper, are the ILLIUM aHoys. These cast aHoys are wear and erosion resistant and highly resistant to corrosion by acids and alkaHes under both oxidizing and reducing conditions. 

Niobium carbide is used as a component of hard metals, eg, mixtures of metal carbides that are cemented with cobalt, iron, and nickel. Along with tantalum carbide, niobium carbide is added to impart toughness and shock and erosion resistance. The spiraling rise in the price of tantalum has spurred the development of a hafnium carbide—niobium carbide substitute for tantalum carbide (68). These cemented carbides are used for tool bits, drill bits, shovel teeth, and other wear-resistant components turbine blades and as dies in high pressure apparatus (see Carbides). 

ASTM D2132, Test MethodforDust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials, Vol. 10.02, ASTM, Philadelphia, Pa., 1989. 

Fig. 8. Steady-state model for the earth s surface geochemical system. The kiteraction of water with rocks ki the presence of photosynthesized organic matter contkiuously produces reactive material of high surface area. This process provides nutrient supply to the biosphere and, along with biota, forms the array of small particles (sods). Weatheriag imparts solutes to the water, and erosion brings particles kito surface waters and oceans.

Uses. In spite of unique properties, there are few commercial appUcations for monolithic shapes of borides. They are used for resistance-heated boats (with boron nitride), for aluminum evaporation, and for sliding electrical contacts. There are a number of potential uses ia the control and handling of molten metals and slags where corrosion and erosion resistance are important. Titanium diboride and zirconium diboride are potential cathodes for the aluminum Hall cells (see Aluminum and aluminum alloys). Lanthanum hexaboride and cerium hexaboride are particularly useful as cathodes ia electronic devices because of their high thermal emissivities, low work functions, and resistance to poisoning. 

The cyclones are typically designed with diameters of 100—160 cm for ease of maintenance. Cyclone inlet velocities are usually restricted to 18—21 m /s in the first stage and to 20—26 m/s in the second stage to achieve satisfactory pressure drop and erosion characteristics (62). The number of sets of two-stage cyclones thus depends on the total gas flow. Finding room to house all the necessary cyclones within the regenerator frequently requires considerable ingenuity (62). 

Impact and Erosion. Impact involves the rapid appHcation of a substantial load to a relatively small area. Most of the kinetic energy from the impacting object is transformed into strain energy for crack propagation. Impact can produce immediate failure if there is complete penetration of the impacted body or if the impact induces a macrostress in the piece, causing it to deflect and then crack catastrophically. Failure can also occur if erosion reduces the cross section and load-bearing capacity of the component, causes a loss of dimensional tolerance, or causes the loss of a protective coating. Detailed information on impact and erosion is available (49). 

Types of Wear. There are several distinct types of wear that can be divided into three main categories abrasive wear, sliding wear, and erosive wear. The type of wear encountered in a particular appHcation is an important factor influencing the selection of a wear-resistant material. 

Glass—Ionomer Cement. The glass—ionomer polyelectrolyte system was developed primarily as a restorative for anterior teeth and erosion cavities a general cement a cavity liner and a base, pit, and fissure sealant (27,43—48). 

Pinch The industrial equivalent of controlling flow bv pinching a soda straw is the pinch valve, Mves of this tvpe use fabric-reinforced elastomer sleeves that completely isolate the process fluid from the metal parts in the valve. The valve is actuated bv applying air pressure directly to the outside of the sleeve, causing it to contract or pinch. Another method is to pinch the sleeve with a linear actuator with a specially attached foot. Pinch valves are used extensively for corrosive material service and erosive sliirrv senice. This type of valve is used in applications with pressure drops up to 10 bar (145 psi),... 

Flow in bends and elbow fittings is more turbulent than in straight pipe, thus increasing corrosion and erosion. This can be countered oy selecting a component with greater radius of curvature, thicker wall, or smoother interior contour, but this is seldom economical in miter-elbows. 

Heat-exchanger shutdowns are most often caused by fouling, corrosion, and erosion. 

Product Quality Considerations of product quahty may require low holdup time and low-temperature operation to avoid thermal degradation. The low holdup time eliminates some types of evaporators, and some types are also eliminated because of poor heat-transfer charac teristics at low temperature. Product quality may also dic tate special materials of construction to avoid met hc contamination or a catalytic effect on decomposition of the product. Corrosion may also influence evaporator selection, since the advantages of evaporators having high heat-transfer coefficients are more apparent when expensive materials of construction are indicated. Corrosion and erosion are frequently more severe in evaporators than in other types of equipment because of the high hquid and vapor velocities used, the frequent presence of sohds in suspension, and the necessary concentration differences. 

---