Electrical contact

An IC design with multi-level metallization contains at least two types of contacts  

In most types of IC s, the contacts can end on n+ or p+ mono-crystalline silicon, poly-silicon, various types of silicides, and other materials such as TiN. One of the most important properties of the contact and the via is the contact resistance (Rc)  

The determination of Rc is not trivial and care should be taken that the appropriate device (Kelvin) is used (see for more details chapter III). Values of Rc found in the literature for contacts direct to silicon are in the range of 10 7 Hem2 and vias are in the range of 10 8 Hem2. 

---

Fig. V-17. Schematic diagram for the apparatus for measurement of Vobs (see text). The vibrating reference electrode is positioned close to the surface of a AgN03 solution in which there is an Ag electrode, which, in turn, is in electrical contact with the reference electrode. (From Ref. 196.)...

In these equations the electrostatic potential i might be thought to be the potential at the actual electrodes, the platinum on the left and the silver on the right. However, electrons are not the hypothetical test particles of physics, and the electrostatic potential difference at a junction between two metals is nnmeasurable. Wliat is measurable is the difference in the electrochemical potential p of the electron, which at equilibrium must be the same in any two wires that are in electrical contact. One assumes that the electrochemical potential can be written as the combination of two tenns, a chemical potential minus the electrical potential (- / because of the negative charge on the electron). Wlien two copper wires are connected to the two electrodes, the... 

Beryllium is used as an alloying agent in producing beryllium copper, which is extensively used for springs, electrical contacts, spot-welding electrodes, and non-sparking tools. It is applied as a structural material for high-speed aircraft, missiles, spacecraft, and communication satellites. Other uses include windshield frame, brake discs, support beams, and other structural components of the space shuttle. 

Ruthenium is a hard, white metal and has four crystal modifications. It does not tarnish at room temperatures, but oxidizes explosively. It is attacked by halogens, hydroxides, etc. Ruthenium can be plated by electrodeposition or by thermal decomposition methods. The metal is one of the most effective hardeners for platinum and palladium, and is alloyed with these metals to make electrical contacts for severe wear resistance. A ruthenium-molybdenum alloy is said to be... 

Rhenium is also used as an electrical contact material because it has good wear resistance and withstands arc corrosion. Thermocouples made of Re-W are used for measuring temperatures up to 2200C, and rhenium wire is used in photoflash lamps for photography. 

The metal is extensively used in jewelry, wire, and vessels for laboratory use, and in many valuable instruments including therocouple elements. It is also used for electrical contacts, corrosion-resistant apparatus, and in dentistry. 

Although its principal use is as a hardening agent for platinum, iridium is also used to make crucibles and devices requiring high temperatures. It is also used for electrical contacts. 

The tetroxide has been used to detect fingerprints and to stain fatty tissue for miscroscope slides. The metal is almost entirely used to produce very hard alloys, with other metals of the platinum group, for fountain pen tips, instrument pivots, phonograph needles, and electrical contacts. 

Contact lens fluid Contact nucleation Contact poisons Contacts, electrical Contact shift reagents... 

Lead Telluride. Lead teUuride [1314-91 -6] PbTe, forms white cubic crystals, mol wt 334.79, sp gr 8.16, and has a hardness of 3 on the Mohs scale. It is very slightly soluble in water, melts at 917°C, and is prepared by melting lead and tellurium together. Lead teUuride has semiconductive and photoconductive properties. It is used in pyrometry, in heat-sensing instmments such as bolometers and infrared spectroscopes (see Infrared technology AND RAMAN SPECTROSCOPY), and in thermoelectric elements to convert heat directly to electricity (33,34,83). Lead teUuride is also used in catalysts for oxygen reduction in fuel ceUs (qv) (84), as cathodes in primary batteries with lithium anodes (85), in electrical contacts for vacuum switches (86), in lead-ion selective electrodes (87), in tunable lasers (qv) (88), and in thermistors (89). 

G lv nic Corrosion. Galvanic corrosion is an electrochemical process with four fundamental requirements (/) an anode (magnesium), 2) a cathode (steel, brass, or graphite component), (J) direct anode to cathode electrical contact, and (4) an electrolyte bridge at the anode and cathode interface, eg, salt water bridging the adjacent surfaces of steel and magnesium components. If any one of these is lacking, the process does not occur (133,134). 

Skiving is a variant in which the base metal surface oxides are mechanically removed foUowed immediately by pressure rolling of a precious metal or alloy strip. This is commonly used for inlays for electrical contacts and for jewelry fabrication. The common inlay materials include gold, silver, copper, brass, and solder. No heat is needed, and the coating is appHed only to designated areas so there is Htde waste (3,50). 

Conta.ctMa.teria.ls, Electrical contact materials are produced by either slicing rod made from metal powder, infiltrating a porous refractory skeleton, or compaction and sintering of powders (see Electrical CONNECTORS) (51—53). 

Copper and silver combined with refractory metals, such as tungsten, tungsten carbide, and molybdenum, are the principal materials for electrical contacts. A mixture of the powders is pressed and sintered, or a previously pressed and sintered refractory matrix is infiltrated with molten copper or silver in a separate heating operation. The composition is controlled by the porosity of the refractory matrix. Copper—tungsten contacts are used primarily in power-circuit breakers and transformer-tap charges. They are confined to an oil bath because of the rapid oxidation of copper in air. Copper—tungsten carbide compositions are used where greater mechanical wear resistance is necessary. 

---