Acid chloride reaction with amines

Primary cycloaUphatic amines react with phosgene to form isocyanates. Reaction of isocyanates with primary and secondary amines forms ureas. Dehydration of ureas or dehydrosulfuri2ation of thioureas results in carhodiimides. The nucleophilicity that deterrnines rapid amine reactivity with acid chlorides and isocyanates also promotes epoxide ring opening to form hydroxyalkyl- and dihydroxyalkylaniines. Michael addition to acrylonitrile yields stable cyanoethylcycloalkylarnines. 

Acid chlorides are very reactive, and they readily react with ammonia, primary amines, or secondary amines to form an amide. Figure 12-26 illustrates the reaction of an acid chloride with ammonia. Replacing one or two of the hydrogen atoms of ammonia with an organic group will result in an N-substituted amide. Tertiary amines react with acid chlorides to form a carboxylic acid and an ammonium salt. 

This type of duality of action is presumably present in other situations, such as the Fries rearrangement (78), the Friedel-Crafts reaction with acid chlorides (65) or acid anhydrides (21), and the catalytic chlorination of nitrobenzene (17). In these reactions it appears that the uncoordinated Lewis acid is the effective catalyst. The same situation is illustrated by recent work on aromatic amination (32, 33) and halogenation (57, 58, 71) and seems to be general feature of Lewis acid-catalyzed electrophilic reactions of aromatic compounds containing suitable donor groups. 

Another interesting modification of glass surfaces was introduced by Beier and Hoheisel.23 They synthesized a flexible, dendritic linker system that enables covalent immobilization of oligonucleotides and PNAs with high loading capacity in a controlled manner. This method facilitates the modulation of surface properties such as hydrophobicity and charge. The synthesis of the linker system involves two consecutive reactions an acylation of surface-bound amine groups with acid chloride (4-nitrophenyl-chloroformate or acryloylchloride) and subsequent reaction with an amine. A bis-amine results in a linker system, while a polyamine produces a dendritic structure (Fig. 14.3). Because polyamines possess primary and secondary amine... 

In addition to the synthesis of /1-dicarbonyl compounds3,25, the acylation of enamines also gives access to a wide variety of acyclic, carbocyclic and heterocyclic systems. The course of the reaction is often critically dependent upon the type of enamine used, on the substituents present in the two reagents, and on the experimental conditions, such as temperature, solvent, presence of added tertiary amine, etc. In contrast to alkylation, A-acylation is readily reversible. Since enamines are stronger bases than the C-acylated enamines, half an equivalent of the enamine is lost by salt formation in their reaction with acid chlorides. This can be avoided by addition of a tertiary amine179, but this in... 

Other experimental reproductive effects. A skin and severe eye irritant. A narcotic. Human mutation data reported. A common air contaminant. Highly flammable liquid. NCxmres of 30-60% of the vapor in air ignite above 100°. It can react violently with acid anhydrides, alcohols, ketones, phenols, NH3, HCN, H2S, halogens, P, isocyanates, strong alkalies, and amines. Reactions with cobalt chloride, mercury(II) chlorate, or mercury(II) perchlorate form violendy in the presence of traces of metals or acids. Reaction with oxygen may lead to detonation. When heated to decomposition it emits acrid smoke and fumes. 

We ve already studied the two most general reactions of amines—alkylation and acylation. As we saw earlier in this chapter, primary, secondare and tertiary amines can be alkylated by reaction with a primary alkyl halide. Alkylations of primary and secondary amines are difficult to conind and often give mixtures of products, but tertiary amines are cleanly allqd-ated to give quaternary ammonium salts. Primary and secondary (bat not tertiary) amines can also be acylated by reaction with acid chlorides or add anhydrides to yield amides (Sections 21.4 and 21.5). 

Acyloxaziridines are easily obtained from compounds unsubstituted at nitrogen by reaction with acid chlorides or isocyanates. Acylation proceeds so smoothly that, in the amination of carbonyl compounds, oxaziridine compounds are obtained in better yields on addition of acid chlorides than in the absence of the acylating agent. With aliphatic aldehydes, amination does not succeed at all except in the presence of benzoyl chloride. Proof of structure comes from reduction by iodide to give the acid amide and carbonyl compound. 

Reaction with acid chlorides to give N-substituted acid amides (primary and secondary amines only) ... 

Acetaldehyde is a reactive substance and on storage in the presence of air may undergo oxidation to form explosive peroxides. It may also polymerize violently when in contact with strong acids or trace metals such as iron. Acetaldehyde may undergo violent reactions with acid chlorides, anhydrides, amines, hydrogen cyanide, and hydrogen sulfide. 

The acylation with acid chloride and the urea formation with isocyanate of intermediate resin 16 afforded other substituent groups onto 4-aminothiazole. Under microwave (MW) irradiation reaction with isocyanate and acylation reaction with acid chloride, R -substituted thiazole resin 19 was obtained. Following conversion of sulfonyl resin 19 to sulfonyl resin 20 (mCPBA/CH2Cl2), substitution reactions promoted by treatment with appropriate amines (R R" N diversity elements) furnished the 2,4,5-trisubstituted thiazoles 2 (29 examples 36-25% isolated yields from Merrifield resin 1, >95% purities, Table 10.1). 

Nucleophilic Reactions. M,C)-Bis(trimethylsilyl)hydroxyl-amine is a protected, lipophilic form of hydroxylamine. It reacts with a variety of electrophiles predominantly by attack on the nitrogen nucleophilic center. Reaction with acid chlorides (1 equiv) in the presence of triethylamine gives M<9-bis(trimethylsilyl)-hydroxamic acids by iV-acylation. A related reagent, tris(tri-methylsilyl)hydroxylamine, gives the same product in high yields, also by iV-acylation. Hydrolysis gives the free hydroxamic acids, whereas thermal fragmentation affords isocyanates (eq 1). ... 

Acid chlorides react rapidly and quantitatively with most nucleophiles, and they are hydrolyzed by the moisture in air. Reaction of an acid chloride with an alcohol gives an ester. Reaction with acid chlorides readily converts amines into amides. 

Mechanism of Action. Under photolysis, acidic, and electron bombardment conditions, the transformation of o-nitrobenzyl alcohol or its derivatives involves an internal redox reaction sequence followed by liberation of the deprotected alcohol or amine (eq 1). Analogously, the photorearrangement of esters of o-NBA, obtained through its reaction with acid chlorides or anhydrides, also induces an internal redox reaction (eq 2). 

Reduction of a nitro compound to a primary amine. In a 50 ml. round-bottomed or conical flask fitted with a reflux condenser, place 1 g. of the nitro compound and 2 g. of granulated tin. Measure out 10 ml. of concentrated hydrochloric acid and add it in three equal portions to the mixtiue shake thoroughly after each addition. When the vigorous reaction subsides, heat under reflux on a water bath until the nitro compound has completely reacted (20-30 minutes). Shake the reaction mixture from time to time if the nitro compound appears to be very insoluble, add 5 ml. of alcohol. Cool the reaction mixture, and add 20-40 per cent, sodium hydroxide solution imtil the precipitate of tin hydroxide dissolves. Extract the resulting amine from the cooled solution with ether, and remove the ether by distillation. Examine the residue with regard to its solubility in 5 per cent, hydrochloric acid and its reaction with acetyl chloride or benzene-sulphonyl chloride. 

Two molar equivalents of amine are required m the reaction with acyl chlorides and acid anhydrides one molecule of amine acts as a nucleophile the second as a Brpnsted base... 

Amines are convert ed to amides on reaction with acyl chlorides Other acylating agents such as carboxylic acid anhydrides and esters may also be used but are less reactive... 

Acylation. Aromatic amines react with acids, acid chlorides, anhydrides, and esters to form amides. In general, acid chlorides give the best yield of the pure product. The reaction with acetic, propionic, butanoic, or benzoic acid can be catalyzed with phosphoms oxychloride or trichloride. 

The most important group of derivatives for the amino function (Fig. 7-4) is the carbamate group, which can be formed by reactions with acids, acid chlorides or acid anhydrides. A series of chlorides as 2-chloroisovalerylchloride [1], chrysanthe-moylchloride [2] and especially chloride compounds of terpene derivatives (cam-phanic acid chloride [3], camphor-10-sulfonyl chloride [4]) are used. The a-methoxy-a-trifluoromethylphenylacetic acid or the corresponding acid chloride introduced by Mosher in the 1970s are very useful reagents for the derivatization of amines and alcohols [5]. 

Conversion of Acid Halides into Amides Aminolysis Acid chlorides react rapidly with ammonia and amines to give amides. As with the acid chloride plus alcohol method for preparing esters, this reaction of acid chlorides with amines is the most commonly used laboratory method for preparing amides. Both monosubstituted and disubstituted amines can be used, but not trisubstituted amines (R3N). 

Many of the reactions of amines are familiar from past chapters. Thus, amines react with alkyl halides in S 2 reactions and with acid chlorides in nucleophilic acyl substitution reactions. Amines also undergo E2 elimination to yield alkenes if they are first qualernized by treatment with iodomethane and then heated with silver oxide, a process called the Hofmann elimination. 

---