Alkene hydroformylation, homogeneous

TABLE 3.6. Comparison of the activity and selectivity in the hydroformylation of linear alkenes using homogeneous [HRh(CO)(PPh3)3] and [HRh(CO)(PPh3)3] encapsulated in MCM-48 a... 

Despite this setback, this catalyst system could also be used for the hydroformylation of ethylene and indeed the long-term stability of the catalyst was found to be better than that of the catalyst derived from triphenylphosphine. Hence, this catalyst system allowed the hydroformylation of both high and low molecular weight alkenes under homogeneous conditions combined with facile product separation by simple decantation. 

In general, the mechanism of alkene hydroformylation with an [RhH(CO)P3] catalyst in water or in aqueous/organic biphasic systems (P = TPPTS) is considered to be analogous [61] to that of the same reaction in homogeneous organic solutions (P = PPh3) [84], a basic version of which is shown on Scheme 4.8. 

In the previous chapters we discussed alkene-based homogeneous catalytic reactions such as hydrocarboxylation, hydroformylation, and polymerization. In this chapter we discuss a number of other homogeneous catalytic reactions where an alkene is one of the basic raw materials. The reactions that fall under this category are many. Some of the industrially important ones are isomerization, hydrogenation, di-, tri-, and oligomerization, metathesis, hydrocyana-tion, hydrosilylation, C-C coupling, and cyclopropanation. We have encountered most of the basic mechanistic steps involved in these reactions before. Insertions, carbenes, metallocycles, and p -allyl complexes are especially important for some of the reactions that we are about to discuss. 

Hydroformylation of alkenes by homogenous rhodium catalysts has attracted the attention of researchers for functionalization of complex molecules [42,43]. Al-Abed et al. [44] recently... 

The metal complexes most often studied as polymer-bound catalysts have been Rh(I) complexes, such as analogues of Wilkinson s complex. The catalytic activity of a bound metal complex is nearly the same as that of the soluble analogue. Rhodium complexes are active for alkene hydrogenation, alkene hydroformylation, and, in the presence of CH3I cocatalyst, methanol carbonylation, etc. Polymer supports thus allow the chemistry of homogeneous catalysis to take place with the benefits of an insoluble, easily separated catalyst . ... 

When water-naiscible ionic liquids are used as solvents, and when the products are partly or totally soluble in these ionic liquids, the addition of polar solvents, such as water, in a separation step after the reaction can make the ionic liquid more hydrophilic and facilitate the separation of the products from the ionic liquid/water mixture (Table 5.4-2, case (e)). This concept has been developed by Union Carbide for the higher alkene hydroformylation catalyzed by Rh-sulfonated phosphine ligand in an N-methylpyrrolidone (NMP)/water system. Thanks to the presence of NMP, the reaction is performed in one homogeneous phase. After the reaction, water is added in a mixer followed by eSicient phase separation in a setder. One advantage of this process is its flexibility and good performance with respect to the olefin carbon number. 

These unusual properties were the basis of the fluorous biphasic catalysis process (FBC) first published in 1994 by Horvdth and Rdbai and demonstrated using hydroformylation chemistry as a pertinent example (7, 2) in a 1991 Ph.D. thesis, that was unfortunately not readily available to the homogeneous catalysis community nor published in the open literature, M. Vogt, under the guidance of his Ph.D. advisor, W. Keim, of the Rheinisch-WestflUischen Technischen Hochschule in Aachen, Germany, presented the first conceptual aspects of the FBC approach with an emphasis on oligomerization of alkenes, oxidation of alkenes, hydroformylation of olefins, and telomerization of dienes (5, 4). 

Notable is also the high selective hydrogenation of alkynes to alkenes achieved by a polysiloxane-bound (ether-phosphine) rhodium complex (Scheme 24-5) but not by the non-entrapped catalyst (Lindner, 1997). Likewise, remarkable is the fact that various entrapped alkene hydroformylation catalysis lead often to a much higher ratio of linear branched products than the homogeneous complex (see e.g., Lindner, 2000). 

As far as the application of carbon monoxide as small building block is concerned, its history started with the cobalt-catalyzed alkene hydroformylation developed by Roelen in 1939. This seminal work is generally considered as the start of homogeneous catalysis as well. Since then fundamental work of the highest standard has been carried out in homogeneous catalysis featured by several Nobel laureates. 

The first example of homogeneous transition metal catalysis in an ionic liquid was the platinum-catalyzed hydroformylation of ethene in tetraethylammonium trichlorostannate (mp. 78 °C), described by Parshall in 1972 (Scheme 5.2-1, a)) [1]. In 1987, Knifton reported the ruthenium- and cobalt-catalyzed hydroformylation of internal and terminal alkenes in molten [Bu4P]Br, a salt that falls under the now accepted definition for an ionic liquid (see Scheme 5.2-1, b)) [2]. The first applications of room-temperature ionic liquids in homogeneous transition metal catalysis were described in 1990 by Chauvin et al. and by Wilkes et ak. Wilkes et al. used weekly acidic chloroaluminate melts and studied ethylene polymerization in them with Ziegler-Natta catalysts (Scheme 5.2-1, c)) [3]. Chauvin s group dissolved nickel catalysts in weakly acidic chloroaluminate melts and investigated the resulting ionic catalyst solutions for the dimerization of propene (Scheme 5.2-1, d)) [4]. 

Regioselective reactions belong to the most important applications of homogeneous catalysis. An example is the hydroformylation of alkenes, which is a very important industrial reaction ... 

Batch Experiments with Thermomorphic Systems. As a reference, we tested the hydroformylation of 1-octene in a completely homogeneous system using the same rhodium triphenylphosphine catalyst that is used for hydroformylation of lower aldehydes. This is sample R39 in Table 28.1, and gives us a baseline to compare the performance of our systems in terms of conversion and selectivity. To maintain consistency, we performed all the reactions at 100°C using the same amounts of reactants, catalysts and solvents. Under these conditions we only detected aldehyde products no alcohol or alkene isomers were formed. 

The hydroformylation of alkenes, which was originally discovered by Otto Roelen in 1938 [1], has developed into one of the most important applications of homogeneous catalysis in industry (Scheme 1) [2,3]. Today, more than 9 million tons of so-called oxo-products are produced per year, a number which is still rising continuously. The majority of these oxo-products stem... 

The synthesis of aldehydes from alkenes known as hydroformylation using CO and hydrogen and a homogeneous catalyst is a very important industrial process [204]. Today, over seven million tons of oxoproducts are formed each year using this procedure, with the majority of butanal and butanol from propene. To further increase the efficiency of this process it can be combined with other transformations in a domino fashion. Eilbracht and coworkers [205] used a Mukaiyama aldol reaction as a second step, as shown for the substrate 6/2-63 which, after 3 days led to 6/2-65 in 91% yield via the primarily formed adduct 6/2-64 (Scheme 6/2.13). However, employing a reaction time of 20 h gave 6/2-64 as the main product. 

In subsequent work the same supported catalysts were used in different reactor setups [20] (Figure 3.3). A vapour-phase reactor in which the supported catalyst was mounted on a bed was used for the hydroformylation of volatile alkenes such as cis-2-butene and trifluoropropene. The initial activities and selectivity s were similar to those of the homogeneous solutions, i.e. a TOF of 114 and 90% ee in the hydroformylation of trifluoropropene was reported. No rhodium was detected in the product phase, which means less then 0.8% of the loaded rhodium had leached. The results were, however, very sensitive to the conditions applied and, especially at longer reaction times, the catalyst decomposed. In a second approach the polymer supported complex was packed in a stainless steal column and installed in a continuous flow set-up. 

Pettit and coworkers—metal hydride intermediates by weak base attack over Fe carbonyl catalysts. Pettit et al.ls approached the use of metal carbonyl catalysts for the homogeneous water-gas shift reaction from the standpoint of hydroformyla-tion by the Reppe modification.7 In the typical hydroformylation reaction, an alkene is converted to the next higher aldehyde or alcohol through reaction of CO and H2 with the use of a cobalt or rhodium carbonyl catalyst. However, in the Reppe modification, the reduction is carried out with CO and H20 in lieu of H2 (Scheme 6) ... 

---