Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Alkene catalysis

Keywords Metathesis Alkenes Catalysis Ruthenium Metal carbene complexes... [Pg.224]

Keywords Cross-metathesis, Ring-opening, Alkenes, Catalysis, Dienes... [Pg.164]

The regioselectivity benefits from the increased polarisation of the alkene moiety, reflected in the increased difference in the orbital coefficients on carbon 1 and 2. The increase in endo-exo selectivity is a result of an increased secondary orbital interaction that can be attributed to the increased orbital coefficient on the carbonyl carbon ". Also increased dipolar interactions, as a result of an increased polarisation, will contribute. Interestingly, Yamamoto has demonstrated that by usirg a very bulky catalyst the endo-pathway can be blocked and an excess of exo product can be obtained The increased di as tereo facial selectivity has been attributed to a more compact transition state for the catalysed reaction as a result of more efficient primary and secondary orbital interactions as well as conformational changes in the complexed dienophile" . Calculations show that, with the polarisation of the dienophile, the extent of asynchronicity in the activated complex increases . Some authors even report a zwitteriorric character of the activated complex of the Lewis-acid catalysed reaction " . Currently, Lewis-acid catalysis of Diels-Alder reactions is everyday practice in synthetic organic chemistry. [Pg.12]

Khan, M. M. T. 1974, Homogeneous Catalysis by Metal Complexes, Vol. II, Activation of Alkenes and Alkynes, Academic Press New York - London... [Pg.372]

In contrast to oxidation in water, it has been found that 1-alkenes are directly oxidized with molecular oxygen in anhydrous, aprotic solvents, when a catalyst system of PdCl2(MeCN)2 and CuCl is used together with HMPA. In the absence of HMPA, no reaction takes place(100]. In the oxidation of 1-decene, the Oj uptake correlates with the amount of 2-decanone formed, and up to 0.5 mol of O2 is consumed for the production of 1 mol of the ketone. This result shows that both O atoms of molecular oxygen are incorporated into the product, and a bimetallic Pd(II) hydroperoxide coupled with a Cu salt is involved in oxidation of this type, and that the well known redox catalysis of PdXi and CuX is not always operalive[10 ]. The oxidation under anhydrous conditions is unique in terms of the regioselective formation of aldehyde 59 from X-allyl-A -methylbenzamide (58), whereas the use of aqueous DME results in the predominant formation of the methyl ketone 60. Similar results are obtained with allylic acetates and allylic carbonates[102]. The complete reversal of the regioselectivity in PdCli-catalyzed oxidation of alkenes is remarkable. [Pg.30]

The thioboration of terminal alkynes with 9-(alkylthio)-9-borabicyclo[3.3.1]-nonanes (9-RS-9-BBN) proceeds regio- and stereoselectively by catalysis of Pd(Ph,P)4 to produce the 9-[(Z)-2-(alkylthio)-l-alkeny)]-9-BBN derivative 667 in high yields. The protonation of the product 667 with MeOH affords the Markownikov adduct 668 of thiol to 1-alkyne. One-pot synthesis of alkenyl sulfide derivatives 669 via the Pd-catalyzed thioboration-cross-coupling sequence is also possible. Another preparative method for alkenyl sulfides is the Pd-catalyzed cross-coupling of 9-alkyl-9-BBN with l-bromo-l-phe-nylthioethene or 2-bromo-l-phenylthio-l-alkene[534]. [Pg.225]

Stereoselective and chemoselective semihydrogenation of the internal alkyne 208 to the ew-alkene 210 is achieved by the Pd-catalyzed reaction of some hydride sources. Tetramethyldihydrosiloxane (TMDHS) (209) i.s used in the presence of AcOH[116]. (EtO)3SiH in aqueous THF is also effective for the reduction of alkynes to di-alkenes[l 17], Semihydrogenation to the d.v-alkene 211 is possible also with triethylammonium formate with Pd on carbon[118]. Good yields and high cis selectivity are obtained by catalysis with Pd2fdba)3-Bu3P[119],... [Pg.497]

FIGURE 6 1 A mechanism for heterogeneous catalysis in the hydrogenation of alkenes... [Pg.232]

Another method for the hydration of alkenes is by reaction with water under conditions of acid catalysis... [Pg.247]

The point was made earlier (Section 5 9) that alcohols require acid catalysis in order to undergo dehydration to alkenes Thus it may seem strange that aldol addition products can be dehydrated in base This is another example of the way in which the enhanced acidity of protons at the a carbon atom affects the reactions of carbonyl com pounds Elimination may take place in a concerted E2 fashion or it may be stepwise and proceed through an enolate ion... [Pg.772]

Friedel-Crafts alkylation using alkenes has important industrial appHcations. The ethylation of benzene with ethylene to ethylbenzene used in the manufacture of styrene, is one of the largest scale industrial processes. The reaction is done under the catalysis of AlCl in the presence of a proton source, ie, H2O, HCl, etc, although other catalysts have also gained significance. [Pg.551]

Alkylphenols containing 3—12-carbon alkyl groups are produced from the corresponding alkenes under acid catalysis. Alkylphenols containing the methyl group were traditionally extracted from coal tar. Today they are produced by the alkylation of phenol with methanol. [Pg.57]

The alkylation of phenol with an alkene using either acid or aluminum catalysis probably accounts for 95% of the commercially produced alkylphenols with alkyl groups of three carbons or larger. The alkenes are commercially available and environmentally kind. They do not produce by-products as do alkylations which use alcohols or alkyl haUdes. Together with an acid catalyst and the appropriate amount of phenol, mono-, di-, and trialkylphenols can be produced. [Pg.59]

Acid catalysis using strong acid catalysts, especially 2eohtes which enhance selectivity because of pore si2e restrictions, has been used for a variety of alkenes and dienes (9—11). /-Butyltoluenediamine [106398-83-8] (/-BTDA) (C H gN2) is available on a semicommercial basis (12). [Pg.237]

Ca.ta.lysts, A small amount of quinoline promotes the formation of rigid foams (qv) from diols and unsaturated dicarboxyhc acids (100). Acrolein and methacrolein 1,4-addition polymerisation is catalysed by lithium complexes of quinoline (101). Organic bases, including quinoline, promote the dehydrogenation of unbranched alkanes to unbranched alkenes using platinum on sodium mordenite (102). The peracetic acid epoxidation of a wide range of alkenes is catalysed by 8-hydroxyquinoline (103). Hydroformylation catalysts have been improved using 2-quinolone [59-31-4] (104) (see Catalysis). [Pg.394]

Alkenes lacking phenyl substituents appear to react by a similar mechanism. Both the observation of general acid catalysis and the kinetic evidence of a solvent isotope effect are consistent with rate-limiting protonation with simple alkenes such as 2-metlQ lpropene and 2,3-dimethyl-2-butene. [Pg.359]

Xenon difluoride [4, 5, 7, 8,10] is a white crystalline material obtained through the combination of fluorine and xenon m the presence of light The reagent is commercially available and possesses a relatively long shelf-life when stored cold (freezer) Xenon difluoride is very effective for small-scale fluormation of alkenes and activated nucleophilic substrates. The reactions are usually conducted between 0 °C and room temperature in chloroform or methylene chloride solutions Hydrogen fluoride catalysis is sometimes helpful Xenon difluoride reacts in a manner that usually involves some complexation between the substrate and reagent followed by the formation of radical and radical cation intermediates... [Pg.158]

Stable transition-metal complexes may act as homogenous catalysts in alkene polymerization. The mechanism of so-called Ziegler-Natta catalysis involves a cationic metallocene (typically zirconocene) alkyl complex. An alkene coordinates to the complex and then inserts into the metal alkyl bond. This leads to a new metallocei e in which the polymer is extended by two carbons, i.e. [Pg.251]

The final class of reactions to be considered will be the [4 + 2]-cycloaddition reaction of nitroalkenes with alkenes which in principle can be considered as an inverse electron-demand hetero-Diels-Alder reaction. Domingo et al. have studied the influence of reactant polarity on the reaction course of this type of reactions using DFT calculation in order to understand the regio- and stereoselectivity for the reaction, and the role of Lewis acid catalysis [29]. The reaction of e.g. ni-troethene 15 with an electron-rich alkene 16 can take place in four different ways and the four different transition-state structures are depicted in Fig. 8.16. [Pg.320]

Although Lewis acid-catalyzed-Diels-Alder reacdons of enones are common, there are few repoiTS on the catalysis of Dieis-Alder reacdon of nltroalkenes The reacdon of nltroalkenes with alkenes in the presence of Lewis acids undergoes a different course of reacdon to give cyclic nltronates fsee Secdon 8 3 Knochei repotted an enhanced reacdvity and seiecdvity of the intramolecular Dieis-Alder reacdon using silica gei as Lewis acid in hexane fEq 8 19 ... [Pg.239]

The first example of homogeneous transition metal catalysis in an ionic liquid was the platinum-catalyzed hydroformylation of ethene in tetraethylammonium trichlorostannate (mp. 78 °C), described by Parshall in 1972 (Scheme 5.2-1, a)) [1]. In 1987, Knifton reported the ruthenium- and cobalt-catalyzed hydroformylation of internal and terminal alkenes in molten [Bu4P]Br, a salt that falls under the now accepted definition for an ionic liquid (see Scheme 5.2-1, b)) [2]. The first applications of room-temperature ionic liquids in homogeneous transition metal catalysis were described in 1990 by Chauvin et al. and by Wilkes et ak. Wilkes et al. used weekly acidic chloroaluminate melts and studied ethylene polymerization in them with Ziegler-Natta catalysts (Scheme 5.2-1, c)) [3]. Chauvin s group dissolved nickel catalysts in weakly acidic chloroaluminate melts and investigated the resulting ionic catalyst solutions for the dimerization of propene (Scheme 5.2-1, d)) [4]. [Pg.214]

Keto-enol tautomerism of carbon) ] compounds is catalyzed by both acids and bases. Acid catalysis occurs by protonation of the carbonyl oxygen atom to give an intermediate cation that Joses H+ from its a carbon to yield a neutral enol (Figure 22.1). This proton loss from the cation intermediate is similar to what occurs during an El reaction when a carbocation loses H+ to form an alkene (Section 11.10). [Pg.843]

Catalysis. Cytochrome P-450 model compounds catalyze the epoxidation of alkenes by hypochlorite ions.16 A typical catalyst is OMn(TMP)L+. [Pg.98]

Alkenyl alcohols, (E) disubstituted, 55, 66 ALKYL HALIDES, alkenes from, 55, 103 C-ALKYLATION, phase transfer catalysis... [Pg.137]


See other pages where Alkene catalysis is mentioned: [Pg.168]    [Pg.168]    [Pg.216]    [Pg.263]    [Pg.403]    [Pg.524]    [Pg.610]    [Pg.613]    [Pg.265]    [Pg.265]    [Pg.556]    [Pg.353]    [Pg.36]    [Pg.37]    [Pg.360]    [Pg.610]    [Pg.613]    [Pg.146]    [Pg.212]    [Pg.224]    [Pg.266]    [Pg.98]    [Pg.167]   
See also in sourсe #XX -- [ Pg.231 , Pg.233 , Pg.242 , Pg.246 , Pg.394 , Pg.395 ]




SEARCH



1,2-reduction to alkenes homogeneous catalysis

Acid catalysis alkene isomerization

Alkene hydroboration catalysis

Alkene hydroformylation catalysis

Alkene hydroformylation, asymmetric catalysis

Alkene hydrogenation catalysis

Alkene hydrosilation catalysis

Alkene isomerization catalysis

Alkene polymerization Ziegler-Natta catalysis

Alkene polymerization Ziegler-Natta catalysis and metallocene catalysts

Alkenes Lewis acid catalysis

Alkenes catalysis, rhodium complexes

Alkenes for metal catalysis

Alkenes heterogeneous catalysis

Alkenes homogeneous catalysis

Alkenes hydrocyanation, homogeneous catalysis

Alkenes hydroformylation, homogeneous catalysis

Alkenes hydrosilation, homogeneous catalysis

Alkenes palladium catalysis

Alkenes transition metal catalysis

Asymmetric catalysis alkene hydrogenation

Catalysis alkene metathesis

Catalysis alkene polymerisation

Catalysis alkene reactions

Catalysis asymmetric alkene dihydroxylation

Catalysis metal-alkene reactions

Cobalt alkene epoxidation catalysis

Cyanohydrin anions alkenes, palladium catalysis

Cytochrome alkene epoxidation catalysis

Direct catalysis alkyne/alkene additions

Gold catalysis Alkene activation

Heterogeneous catalysis alkene polymerization

Homogeneous catalysis alkene (olefin) and alkyne metathesis

Homogeneous catalysis alkene (olefin) metathesis

Homogeneous catalysis alkene hydrogenation

Homogeneous catalysis alkene isomerization

Homogeneous catalysis alkene metathesis

Homogeneous catalysis alkene polymerization

Homogeneous catalysis, of alkene hydrogenation

Iron porphyrins alkene epoxidation catalysis

Lithium, phenyladdition reactions alkenes, palladium catalysis

Palladium Catalysis for Oxidative 1,2-Difunctionalization of Alkenes

Palladium catalysis Alkene alkylation

Palladium catalysis Alkene amination

Palladium catalysis Alkene carbonylation

Palladium catalysis alkene acetalization

Peterson alkenation catalysis

Phase transfer catalysis alkene oxidation

Polymerization, alkene, catalysis

Ziegler-Natta Catalysis of Alkene Polymerization

© 2024 chempedia.info