Adsorption characterizing basicity

Another possibility for characterizing zeolite acid sites is the adsorption of basic probe molecules and subsequent spectroscopic investigation of the adsorbed species. Phosphines or phosphine oxides have been quite attractive candidates due to the high chemical shift sensitivity of 31P, when surface interactions take place [218-222]. This allows one to obtain information on the intrinsic accessibility and acidity behavior, as well as the existence of different sites in zeolite catalysts. 

Ammonia and pyridine are frequently used as probe molecules for the characterization of acidic surfaces, but they also adsorb on strongly basic sites. Tsyganenko et al. (54) proposed various species resulting from NH3 adsorption on basic solids (Scheme 1). The formation of species I corresponds to hydrogen bonding to a basic surface oxygen, and species II, formed by dissociation to give NH2 and hydroxyl species, involves an acid-base site. Such adsorption requires... 

The technique has been fruitfully used to characterize acid and basic sites in many catalysts, in particular for zeoHtes and metal oxides [143]. It has also been applied for POMs [144]. It consists of measuring the differential heats of adsorption when adsorbing successive increments of a basic probe molecule such as ammonia or pyridine for acidity characterization or of an acid probe molecule such as GO2 or SO2 to characterize basicity. The technique produces a histogram of the acid-base strength as a function of coverage, in particular when heterogeneity in strength exists. The data should then be compared with ammonia or pyridine desorption data from IR and thermal desorption experiments (see above). 

An experiment of adsorption from the gas-phase, performed in microcalorimeter coupled with volumetric line can give a profile of Qdi/ versus the amount adsorbed, integral heats of adsorption, adsorption isotherms (adsorbed amounts vs. equilibrium pressure) and irreversibly absorbed amount of a chemisorbed gas the same stands for the adsorption from the liquid-phase, where the adsorbate (titrant) is added to both sample and reference ceUs simultaneously. The profile of differential heats versus the uptake of probe gives the data concCTning the amount, strength and distribution of the active sites. Besides, the values of initial heats of adsorption characterize the strongest sites active in adsorption process. For the sake of acidic/basic characterization of solids surface, the most commonly used gas-phase probes are ammonia, pyridine or some amines for the interaction with acidic sites. SO2 and CO2 are the probes used to notice and characterize the basic sites. In microporous solids, the accessibility of active sites is not the same for the molecules of different sizes. Therefore, many different probes can be applied to study acidity or basicity of same solid materials this approach brings additional information. For example, acidity of zeolites can be characterized by adsorption of ammonia, but also by adsorption of pyridine (from the gas phase) and aniline (from the liquid phase) [20-22], Liquid microcalorimetry can be also used for the determination of acidic character of solid adsorbent the common liquid-phase probe is aniline dissolved in n-decane [40]. 

In the present work low temperature adsoi ption of fluoroform and CO, were used to characterize surface basicity of silica, both pure and exposed to bases. It was found that adsorption of deuterated ammonia results in appearance of a new CH stretching vibration band of adsorbed CHF, with the position typical of strong basic sites, absent on the surface of pure silica. Low-frequency shift of mode of adsorbed CO, supports the conclusion about such basicity induced by the presence of H-bonded bases. 

In order to correlate this model reaction with physicochemical techniques, 2,6-dimethylpyridine and carbon dioxide adsorption followed by Infrared spectroscopy [2-4] which are generally used to respectively characterize the acidity and the basicity of aluminas were also undertaken. 

Surface Acoustic Waves (SA Ws). The basic idea of this technique is to use the dependence of the frequency and propagation of surface acoustic waves on mass loading in a film. The porous film has to be deposited on a piezoelectric substrate (quartz), which is then placed into a physisorption setup to condense nitrogen at 77 K. Adsorption and condensation of N2 result in a shift of the oscillation frequency, and thus measurements of the oscillation frequency as a function of N2 partial pressure provide an adsorption-desorption isotherm.30 Although the technique has proven to provide a concise characterization of porous films,29,30 the requirement for the deposition directly onto the SAW piezoelectric substrate represents a certain restriction. 

Another thermal analysis method available for catalyst characterization is microcalorimetiy, which is based on the measurement of the heat generated or consumed when a gas adsorbs and reacts on the surface of a solid [66-68], This information can be used, for instance, to determine the relative stability among different phases of a solid [69], Microcalorimetiy is also applicable in the measurement of the strengths and distribution of acidic or basic sites as well as for the characterization of metal-based catalysts [66-68], For instance, Figure 1.10 presents microcalorimetry data for ammonia adsorption on H-ZSM-5 and H-mordenite zeolites [70], clearly illustrating the differences in both acid strength (indicated by the different initial adsorption heats) and total number of acidic sites (measured by the total ammonia uptake) between the two catalysts. 

Gas adsorption (physisorption) is one of the most frequently used characterization methods for micro- and mesoporous materials. It provides information on the pore volume, the specific surface area, the pore size distribution, and heat of adsorption of a given material. The basic principle of the methods is simple interaction of molecules in a gas phase (adsorptive) with the surface of a sohd phase (adsorbent). Owing to van der Waals (London) forces, a film of adsorbed molecules (adsorbate) forms on the surface of the solid upon incremental increase of the partial pressure of the gas. The amount of gas molecules that are adsorbed by the solid is detected. This allows the analysis of surface and pore properties. Knowing the space occupied by one adsorbed molecule, Ag, and the number of gas molecules in the adsorbed layer next to the surface of the solid, (monolayer capacity of a given mass of adsorbent) allows for the calculation of the specific surface area, As, of the solid by simply multiplying the number of the adsorbed molecules per weight unit of solid with the space required by one gas molecule ... 

Interface and colloid science has a very wide scope and depends on many branches of the physical sciences, including thermodynamics, kinetics, electrolyte and electrochemistry, and solid state chemistry. Throughout, this book explores one fundamental mechanism, the interaction of solutes with solid surfaces (adsorption and desorption). This interaction is characterized in terms of the chemical and physical properties of water, the solute, and the sorbent. Two basic processes in the reaction of solutes with natural surfaces are 1) the formation of coordinative bonds (surface complexation), and 2) hydrophobic adsorption, driven by the incompatibility of the nonpolar compounds with water (and not by the attraction of the compounds to the particulate surface). Both processes need to be understood to explain many processes in natural systems and to derive rate laws for geochemical processes. 

A combination of column adsorption chromatography on basic alumina and GC of the eluate served for characterization of the trace fraction of nitrogen-containing compounds in hydroprocessed naphtha. These were subdivided into groups of four types, namely pyridines, pyrroles (the most abundant), anilines and indoles125. 

Adsorption of a specific probe molecule on a catalyst induces changes in the vibrational spectra of surface groups and the adsorbed molecules used to characterize the nature and strength of the basic sites. The analysis of IR spectra of surface species formed by adsorption of probe molecules (e.g., CO, CO2, SO2, pyrrole, chloroform, acetonitrile, alcohols, thiols, boric acid trimethyl ether, acetylenes, ammonia, and pyridine) was reviewed critically by Lavalley (50), who concluded that there is no universally suitable probe molecule for the characterization of basic sites. This limitation results because most of the probe molecules interact with surface sites to form strongly bound complexes, which can cause irreversible changes of the surface. In this section, we review work with some of the probe molecules that are commonly used for characterizing alkaline earth metal oxides. 

Isomerization of jS-isophorone to a-isophorone has been represented as a model reaction for the characterization of solid bases 106,107). The reaction involves the loss of a hydrogen atom from the position a to the carbonyl group, giving an allylic carbanion stabilized by conjugation, which can isomerize to a species corresponding to the carbanion of a-isophorone (Scheme 9). In this reaction, zero-order kinetics has been observed at 308 K for many bases, and consequently the initial rate of the reaction is equal to the rate constant. The rate of isomerization has been used to measure the total number of active sites on a series of solid bases. Figueras et al. (106,107) showed that the number of basic sites determined by CO2 adsorption on various calcined double-layered hydroxides was proportional to the rate constants for S-isophorone isomerization (Fig. 3), confirming that the reaction can be used as a useful tool for the determination of acid-base characteristics of oxide catalysts. 

For basicity measurements, the number of acidic probes able to cover a wide range of strength is rather small [166]. The most common acidic probe molecules used are CO2 (p/fa = 6.37) and SO2 (p/fa = 1.89). Carboxylic acids such as acetic acid can also be used but dimmers can be formed, particularly at high coverage. Pyrrole may also be used, particularly at low adsorption temperature, but has sometimes shown some amphoteric character [103]. Hexafluoroisopropanol has also been used to characterize the surface basicity of some solids [145]. 

---