Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Adaptive behavior, requirements

The benefit of neutrality has yet to be captured with in vitro protein evolution. Neutral theory predicts the punctuated emergence of novel structure and function, however, with current methods, the required time scale is not feasible. Utilizing neutral evolution to accelerate the discovery of new functional and structural solutions requires a theory that predicts the behavior of mutational pathways between networks. Because the transition from neutral to adaptive evolution requires a multi-mutational switch, increasing the mutation rate decreases the time required for a punctuated change to occur. By limiting the search to... [Pg.153]

In class 11, in spite of the fixed specification, the lack of information about the environment causes unpredictable constraints in solving the problem. To deal with this problem, it is required to be capable to detect and adapt to the resulting constraint through interaction with the environment during the system runs. Learning and adaptation-based approaches such as reinforcement learning, adaptive behavior, and behavior-based are feasible for this class of problems. Eixed semantics and adaptive syntax characterize the model in this class. [Pg.459]

Effective computation, such as that required by life processes and the maintenance of evolvability and adaptability in complex systems, requires both the storage and transmission of information. If correlations between separated sites (or agents) of a system are too small - as they are in the ordered regime shown in figure 11.3 -the sites evolve essentially independently of one another and little or no transmission takes place. On the other hand, if the correlations are too strong - as they are in the chaotic regime - distant sites may cooperate so strongly so as to effectively mimic each other s behavior, or worse yet, whatever ordered behavior is present may be... [Pg.563]

Fracture mechanic The fracture mechanics theory developed for metals is also adaptable for use with plastics. The basic concepts remain the same, but since metals and plastics are different they require different techniques to describe their fatigue-failure behaviors. Some of the comments made about crack and fracture influences on fatigue performance relate to the theory of fracture mechanics. The fracture mechanics theory method, along with readily... [Pg.85]

This chapter reviews the design of different current and potential applications for plastics. Plastics are used uniquely in these applications because of factors such as availability of their extensive capability in material modifications to meet specific material and processing requirements. By incorporating some innate behaviors of the materials and adapting them to operate in unusual environments, low cost products are produced as well as some of the most significant and sophisticated problems of man-kind are being solved by the use of plastics. [Pg.204]

The correction to the relaxing density matrix can be obtained without coupling it to the differential equations for the Hamiltonian equations, and therefore does not require solving coupled equations for slow and fast functions. This procedure has been successfully applied to several collisional phenomena involving both one and several active electrons, where a single TDHF state was suitable, and was observed to show excellent numerical behavior. A simple and yet useful procedure employs the first order correction F (f) = A (f) and an adaptive step size for the quadrature and propagation. The density matrix is then approximated in each interval by... [Pg.334]

Nevertheless, a mutual understanding about colors does work because conunon rules have been implemented by education, habituation, socially approved behavior, and properties that appear to individuals simultaneously, e.g., the vertical signal order of traffic lights. However, those rules are of limited value when color perception is the base for aesthetic appreciation as is the case for many industrial products and food products. In order to meet the demands of as many consumers as possible, producers look for a standard consumer who is most representative of the group. This requires establishment of a reliable measurement procedure that can be reproduced easily and be adapted to the various conditions under which it is applied light conditions, more or less opaque or translucent objects, object surface structures, etc. These measurement procedures were created more than a century ago and have... [Pg.16]

Functioning in a compiex and dangerous environment requires one to possess effective mechanisms of arousai, both arousai to consciousness and emotionai arousai, in order to meet the demands on behavior. For exampie, an organism needs to be abie to arouse behavioraiiy in order to deai with predators and other environmentai threats. As is often the case with disorders of the mind and brain, normai and adaptive mechanisms can be overactivated and thus become maiadaptive. A common outcome of this overactivation is anxiety and insomnia. [Pg.209]

We have shown that the conformational behavior of natural aminoglycosides is characterized by a remarkable flexibility, with different conformations, even non-exo-anomeric ones, in fast exchange. This feature allows the adaptation of these ligands to the spatial and electronic requirements of the different receptors. The large diversity of structures adopted by aminoglycosides in the binding pocket of the different RNA receptors and the enzymes involved in bacterial resistance is consistent with this view. [Pg.136]

While methods validation and accuracy testing considerations presented here have been frequently discussed in the literature, they have been included here to emphasize their importance in the design of a total quality control protocol. The Youden two sample quality control scheme has been adapted for continuous analytical performance surveillance. Methods for graphical display of systematic and random error patterns have been presented with simulated performance data. Daily examination of the T, D, and Q quality control plots may be used to assess analytical performance. Once identified, patterns in the quality control plots can be used to assist in the diagnosis of a problem. Patterns of behavior in the systematic error contribution are more frequent and easy to diagnose. However, pattern complications in both error domains are observed and simultaneous events in both T and D plots can help to isolate the problems. Point-by-point comparisons of T and D plots should be made daily (immediately after the data are generated). Early detection of abnormal behavior reduces the possibility that large numbers of samples will require reanalysis. [Pg.269]

Majerus (61, 62) has approached the failure behavior of highly filled polymers by a thermodynamic treatment in which the ability to resist rupture is related to the propellant s ability to absorb and dissipate energy at a certain rate. An energy criterion which requires failure to be a function of both stress and strain was originally stated by Griffith (36) for brittle materials and later adapted to polymers by Rivlin and Thomas (80). Williams (115) has applied an energy criterion to viscoelastic materials such as solid propellants where appropriate terms are included for viscous energy dissipation. [Pg.230]

How the experimental panorama is influenced by parameters still to be defined was demonstrated by Shibata et al. [86]. Here, preliminary results obtained in aqueous media using a specific brand of high-purity commercial copper cathode were positive with regards to hydrocarbons C3+, provided that no electropolishing was performed before the electrochemical process. If electropolishing preceded the C02 reduction, the cathodes behaved similarly to any other copper cathode, leading essentially (besides hydrogen) only to methane end ethylene. A tentative explanation of this behavior was proposed which referred to the polycrystalline matrix of this brand of copper, which made it particularly adaptable to be covered by oxide layers active in the formation of C3+. However, further experimental evidence on the surface structure, composition and modifications with electrolysis time will be required to substantiate this hypothesis. [Pg.328]

Rate theory does successfully model the behavior of many receptors. It can also be adapted to accommodate partial agonists and antagonists. Determining kon and fcoff requires more experimental effort than determining KV). [Pg.116]

Osteocytes also rapidly release nitric oxide in response to stress [160, 105] and this NO response seems to be required for the stress-related prostaglandin release [105]. Therefore, the behavior of osteocytes compares to that of endothelial cells which regulate the flow of blood through the vascular system, and also respond to fluid flow of 0.5 Pa with increased prostaglandin and nitric oxide production [79]. The response of endothelial cells to shear stress is likely related to their role in mediating an adaptive remodeling of the vasculature, so as to maintain constant endothelial fluid shear stress throughout the arterial site of the circulation [99],... [Pg.13]


See other pages where Adaptive behavior, requirements is mentioned: [Pg.252]    [Pg.252]    [Pg.252]    [Pg.252]    [Pg.309]    [Pg.154]    [Pg.24]    [Pg.187]    [Pg.403]    [Pg.62]    [Pg.117]    [Pg.247]    [Pg.238]    [Pg.8]    [Pg.204]    [Pg.55]    [Pg.924]    [Pg.109]    [Pg.488]    [Pg.51]    [Pg.150]    [Pg.117]    [Pg.212]    [Pg.440]    [Pg.86]    [Pg.247]    [Pg.39]    [Pg.322]    [Pg.230]    [Pg.231]    [Pg.371]    [Pg.62]    [Pg.233]    [Pg.261]    [Pg.154]    [Pg.506]    [Pg.683]    [Pg.212]   
See also in sourсe #XX -- [ Pg.95 ]




SEARCH



Adaptive behavior

Behavioral adaptation

© 2024 chempedia.info