Vanadium properties

Several vanadium properties are being evaluated as additional sources of vanadium, but firm determinations have yet to be made relative to economic viability. Substantial vanadium reserves are indicated for many of these properties, and a decision to put any one into production would result in a significant addition to the projected capacity. 

Gronbeck H and Rosen A 1997 Geometric and electronic properties of small vanadium clusters a density functional study J. Chem. Phys. 107 10 620... 

Alloys with other useful properties can be obtained by using yttrium as an additive. The metal can be used as a deoxidizer for vanadium and other nonferrous metals. The metal has a low cross section for nuclear capture. 90Y, one of the isotopes of yttrium, exists in equilibrium with its parent 90Sr, a product of nuclear explosions. Yttrium has been considered for use as a nodulizer for producing nodular cast iron, in which the graphite forms compact nodules instead of the usual flakes. Such iron has increased ductility. 

Common alloying elements include nickel to improve low temperature mechanical properties chromium, molybdenum, and vanadium to improve elevated-temperature properties and silicon to improve properties at ordinary temperatures. Low alloy steels ate not used where corrosion is a prime factor and are usually considered separately from stainless steels. 

Carbon content is usually about 0.15% but may be higher in bolting steels and hot-work die steels. Molybdenum content is usually between 0.5 and 1.5% it increases creep—mpture strength and prevents temper embrittlement at the higher chromium contents. In the modified steels, siUcon is added to improve oxidation resistance, titanium and vanadium to stabilize the carbides to higher temperatures, and nickel to reduce notch sensitivity. Most of the chromium—molybdenum steels are used in the aimealed or in the normalized and tempered condition some of the modified grades have better properties in the quench and tempered condition. 

Several forms of magnesium vanadates have been characterized. Some physical properties ate summarized in Table 27 (28—30) (see also Vanadium AND VANADIUM ADLOYS). 

Vanadium—Cobalt-Iron Alloys. V—Co—Fe permanent-magnet alloys also are ductile. A common commercial ahoy, Vicahoy I, has a nominal composition 10 wt % V, 52 wt % Co, and 38 wt % Fe (Table 10). Hard magnetic properties are developed by quenching from 1200°C for conversion to bcc a-phase foUowed by aging at 600°C (precipitation of fee y-phase). The resulting properties are isotropic, with ca kJ/m ... 

Ferrophosphoms is produced as a by-product in the electrothermal manufacture of elemental phosphoms, in which iron is present as an impurity in the phosphate rock raw material. The commercial product contains ca 23—29% P and is composed primarily of Fe2P [1310-43-6] and Fe P [12023-53-9] along with impurities such as Cr and V. Ferrophosphoms is used in metallurgical processes for the addition of phosphoms content. Low concentrations (up to - 0.1%) of phosphoms in wrought and cast iron and steel not only increases the strength, hardness, and wear resistance but also improves the flow properties. In large stmctural members and plates, it is desirable to use a type of steel that does not need to be quenched or tempered, and thus does not exhibit weld-hardening. This property is afforded by the incorporation of a small quantity of phosphoms in steel. Ferrophosphoms from western U.S. phosphoms production is used as a raw material for the recovery of vanadium (see Vanadiumand vanadiumalloys). 

In the calciaation process, a mixture of corresponding oxides and an optional modifier, eg, molybdic acid, are milled together to achieve a homogenous mixture. The mixture is calciaed at 750—950°C and milled to a desired particle size. Wet milling ia an alkaline medium is recommended to remove any unreacted vanadium salts that ate beheved to degrade the pigmentary properties of bismuth vanadate (39). 

Physical and Chemical Properties. Titanium dioxide [13463-67-7] occurs in nature in three crystalline forms anatase [1317-70-0] brookite [12188-41 -9] and mtile [1317-80-2]. These crystals are essentially pure titanium dioxide but contain small amounts of impurities, such as iron, chromium, or vanadium, which darken them. Rutile is the thermodynamically stable form at all temperatures and is one of the two most important ores of titanium. 

Because of the effects of impurity content and processing history, the mechanical properties of vanadium and vanadium alloys vary widely. The typical RT properties for pure vanadium and some of its alloys are hsted in Table 4. The effects of ahoy additions on the mechanical properties of vanadium have been studied and some ahoys that exhibit room-temperature tensile strengths of 1.2 GPa (175,000 psi) have strengths of up to ca 1000 MPa (145,000 psi) at 600°C. Beyond this temperature, most ahoys lose tensile strength rapidly. 

Table 4. Typical Room Temperature Properties of Vanadium and Vanadium Alloys ...

Some properties of selected vanadium compounds are Hsted in Table 1. Detailed solubiUty data are available (3), as are physical constants of other vanadium compounds (4). Included are the lattice energy of several metavanadates and the magnetic susceptibiUty of vanadium bromides, chlorides, fluorides, oxides, and sulfides (5). 

Table 1. Physical Properties of Some Industrial and Other Selected Vanadium Compounds ...

Borides are inert toward nonoxidizing acids however, a few, such as Be2B and MgB2, react with aqueous acids to form boron hydrides. Most borides dissolve in oxidizing acids such as nitric or hot sulfuric acid and they ate also readily attacked by hot alkaline salt melts or fused alkaU peroxides, forming the mote stable borates. In dry air, where a protective oxide film can be preserved, borides ate relatively resistant to oxidation. For example, the borides of vanadium, niobium, tantalum, molybdenum, and tungsten do not oxidize appreciably in air up to temperatures of 1000—1200°C. Zirconium and titanium borides ate fairly resistant up to 1400°C. Engineering and other properties of refractory metal borides have been summarized (1). 

Vanadium-Sodium Compounds Most Corrosive. Physical property data for vanadates, phase diagrams, laboratory experiments, and numerous field investigations have shown that the sodium vanadates are the lowest melting compounds and are the most corrosive to metals and refractories. These compounds are thought to form by either the vapor phase reaction of NaCI and V2O5 or by the combination of fine droplets of these materials upon the cooler parts of combustion equipment. 

Steel is essentially iron with a small amount of carbon. Additional elements are present in small quantities. Contaminants such as sulfur and phosphorus are tolerated at varying levels, depending on the use to which the steel is to be put. Since they are present in the raw material from which the steel is made it is not economic to remove them. Alloying elements such as manganese, silicon, nickel, chromium, molybdenum and vanadium are present at specified levels to improve physical properties such as toughness or corrosion resistance. 

The properties of the zeolite play a significant role in the overall performance of the catalyst. Understanding these properties increases our ability to predict catalyst response to changes in unit operation. From its inception in the catalyst plant, the zeolite must retain its catalytic properties under the hostile conditions of the FCC operation. The reaclor/regenerator environment can cause significant changes in chemical and structural composition of the zeolite. In the regenerator, for instance, the zeolite is subjected to thermal and hydrothermal treatments. In the reactor, it is exposed to feedstock contaminants such as vanadium and sodium. 

---