Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Types of Activity

Anti-cancer drugs 83MI3 88YZ824, 90JHC1. [Pg.56]

CNS-active drugs, structure-activity relations for 89CRV1765. Immunotropic activity of azole derivatives 90KFZ(10)19. [Pg.56]

Tumor diagnostic and therapy using radiolabeled macrocycle-antibody conjugates 90CSR271. [Pg.56]


In this type of activation, which occurs in both animal and plant tissues, the original insecticide is relatively stable and can be translocated through plant tissues without destmctive hydrolysis until the oxidation has occurred, which then makes the insecticide both highly toxic and relatively unstable so that it rapidly is hydroly2ed to nontoxic products. [Pg.289]

Processes for HDPE with Broad MWD. Synthesis of HDPE with a relatively high molecular weight and a very broad MWD (broader than that of HDPE prepared with chromium oxide catalysts) can be achieved by two separate approaches. The first is to use mixed catalysts containing two types of active centers with widely different properties (50—55) the second is to employ two or more polymerization reactors in a series. In the second approach, polymerization conditions in each reactor are set drastically differendy in order to produce, within each polymer particle, an essential mixture of macromolecules with vasdy different molecular weights. Special plants, both slurry and gas-phase, can produce such resins (74,91—94). [Pg.387]

Most Kaminsky catalysts contain only one type of active center. They produce ethylene—a-olefin copolymers with uniform compositional distributions and quite narrow MWDs which, at their limit, can be characterized by M.Jratios of about 2.0 and MFR of about 15. These features of the catalysts determine their first appHcations in the specialty resin area, to be used in the synthesis of either uniformly branched VLDPE resins or completely amorphous PE plastomers. Kaminsky catalysts have been gradually replacing Ziegler catalysts in the manufacture of certain commodity LLDPE products. They also faciUtate the copolymerization of ethylene with cycHc dienes such as cyclopentene and norhornene (33,34). These copolymers are compositionaHy uniform and can be used as LLDPE resins with special properties. Ethylene—norhornene copolymers are resistant to chemicals and heat, have high glass transitions, and very high transparency which makes them suitable for polymer optical fibers (34). [Pg.398]

Many companies provide support for both their research personnel and technical service personnel to participate in these types of activities. Even a pohcy of one conference per person per year, if appHed correctiy, provides a great deal of value to the individual and to the organization. The returns on this investment iaclude intangibles such as additional technical contacts and enhancement of the technical reputation of the company, as well as tangibles such as personnel possessing the latest information in their fields of endeavor, allowing them to better address customer concerns and needs, and developing ideas for process and product improvements. [Pg.380]

Fig. 13. Types of activated sludge processes (a) plug flow (b) complete mix (c) selector-activated sludge. Fig. 13. Types of activated sludge processes (a) plug flow (b) complete mix (c) selector-activated sludge.
Figure 2 illustrates the two primary classes of PCBs that exhibit this type of activity, namely the coplanar PCBs and their monoortho coplanar analogues. [Pg.65]

The earliest practical use of an expert system was made in the software named MYCIN for diagnosing a toxic poison from the symptoms of a patient and recommending the antidote (62). This type of activity is generally carried out by a human expert who processes information about a situation (in this case, symptoms of a patient), refers to the expert s experience and expert knowledge, and then recommends action (in this case, the antidote). [Pg.82]

A number of 4-pyrazolylpyridinium salts (687) have been found to have hypoglycemic activity in several animal models (68JMC981). The possibility that the corresponding 4-pyrazolylpyridine I-oxides might also exhibit this type of activity was investigated without success (69JMC945). [Pg.291]

Table 1 Hormonal cross-reactivity of three Type of activity s ... Table 1 Hormonal cross-reactivity of three Type of activity s ...
An example with the characteristics of the coupled displacement is the reaction of azide ion with substituted 1-phenylethyl chlorides. Although the reaction exhibits second-order kinetics, it has a substantially negative p value, indicative of an electron deficiency at the transition state. The physical description of this type of activated complex is the exploded S 2 transition state. [Pg.275]

White has shown that the lysergic acids themselves exhibit weakly some, but not all, of the types of activity characteristic of the alkaloids of higher molecular weight. Both acids produce a slight transitory cyanosis of the cockscomb and cause ataxia and delayed miosis in the cat and also relax the isolated rabbit intestine. On the whole, lysergic acid appeared more active than the isomeride. [Pg.534]

Stoll (1945) has pointed out that the polypeptide ergot alkaloids have two main types of activity —... [Pg.536]

Fishbone Diagrams are cause-and-effect diagrams used in quality management to help describe all the activities that can influence the management process and its outcome. These diagrams show the relationship between different activities and how they are grouped around specific types of activity. [Pg.185]

Accident frequencies were evaluated separately for the two types of activity mainline transit and rail yard classification. When an accident occurs and the tank car is damaged, the severity of public exposure depends on several factors, including tlie likelihood of a breach in tlie tank car, the severity level of tlie release (i.e., tlie rale or volume of spillage), the likelihood of an explosion, tlie magnitude of tlie explosion, and die dispersion pattern of the unignited vapors. Recall tliat Part II of tliis book deals witli explosions and tlieir effects Part III treats tliis subject of dispersion. Table 21.3.1 smnmarizes tlie transportation risk data for tlie mainline and rail yard segments of tlie tank car journey. [Pg.616]

From the above data, it is apparent that the I rs-/ ro- ratio strongly depends on the aromatic substrate. In particular, it depends not only on the degree of activation of the substrate and on the displaced group but probably also on the type of activation. [Pg.313]

RS /RO ratio on the degree and type of activation is further confirmed in the latter system where the presence of a 6-nitro substituent increases the ratio to 1.8 or higher. [Pg.314]

The kinetic data for the structures in Schemes II and III lead to the following relationships of the rates of piperidino-dehalogenation (type of activation given in parentheses ind. = inductive activation, res. = resonance activation) ... [Pg.315]

Poly(arylene oxides) with heterocyclic fragments based on new types of activated difluoroaromatic compounds 99MI18. [Pg.219]

This class of medicinal agents was uncovered quite adventitiously in a chemical study, although due credit must be given for the acute pharmacologic studies that uncovered this novel type of activity. [Pg.363]

There is a redundancy of flexibility in the design of FCC catalysts. Variation in the amount and type of zeolite, as well as the type of active matrix, provide a great deal of catalyst options that the refiner can employ to fit its needs. For smaller refiners, it may not be practical to employ pilot plant facilities to evaluate different catalysts. In this case, the above methodology can still be used with emphasis shifted toward using the MAT data to compare the candidate catalysts. It is important that MAT data are properly corrected for temperatu. soaking time, and catalyst strippability effects. [Pg.117]

Two other factors are noteworthy the deleterious effects on chemical and mechanical properties of small amounts of impurities residual from extraction of the metal, and its toxicity. The first of these factors is obviated by vacuum melting the raw metal (for purification) as an essential prerequisite to further processing. The toxicity of beryllium is essentially a pulmonary problem and great care must be taken in handling the finely divided metal or its compounds. In practice, this type of activity is usually carried out under well-ventilated conditions. Certain tolerance levels for atmospheric beryllium are now internationally accepted and merit careful study before work on beryllium is embarked upon. [Pg.832]

Activators and inhibitors. The total amount of light emitted in Ca2+-triggered luminescence is increased by certain alcohols for example, 10% by 2mM n-hexanol, 30% by 2mM n-heptanol, and 18% by saturated n-octanol (Shimomura et al., 1962 Neering and Fryer, 1986). The mechanism of the activation is unclear. No other types of activation is known. [Pg.104]

The disruption of C1C-2 in mice leads to male infertility, blindness, and leukodystrophy, and was attributed to defective extracellular ion homeostasis in narrow clefts. C1C-2 yields currents that slowly activate upon hyperpolarization. It is also activated by cell swelling and by extracellular acidification. Structural determinants that are essential for these types of activation were identified by mutagenesis. There is a report that C1C-2 might be mutated in human epilepsy, but this has not been confirmed in fiuther studies. [Pg.372]

The possibility that acute ethanol directly activates PKC would seem to be ruled out by the lack of such effect occurring in various in vitro systems that have been studied. One possibility is the activation of a phosphatase, others are the modulation of the availability and type of activator. It is also possible that ethanol could modify the sensitivity of the ion channel to the effect of PKC phosphorylation or its proteolytic downregulation. [Pg.485]

The symmetric series provides functional cyclohexadienes, whereas the non-symmetric one serves to build deuterated and/or functional arenes and tentacled compounds. In both series, several oxidation states can be used as precursors and provide different types of activation. The complexes bearing a number of valence, electrons over 18 react primarily by electron-transfer (ET). The ability of the sandwich structure to stabilize several oxidation states [21] also allows us to use them as ET reagents in stoichiometric and catalytic ET processes [18, 21, 22]. The last well-developed type of reactions is the nucleophilic substitution of one or two chlorine atoms in the FeCp+ complexes of mono- and o-dichlorobenzene. This chemistry is at least as rich as with the Cr(CO)3 activating group and more facile since FeCp+ activator is stronger than Cr(CO) 3. [Pg.50]


See other pages where Types of Activity is mentioned: [Pg.511]    [Pg.47]    [Pg.397]    [Pg.398]    [Pg.167]    [Pg.28]    [Pg.153]    [Pg.107]    [Pg.28]    [Pg.261]    [Pg.239]    [Pg.215]    [Pg.528]    [Pg.549]    [Pg.759]    [Pg.287]    [Pg.241]    [Pg.278]    [Pg.319]    [Pg.231]    [Pg.134]    [Pg.180]    [Pg.1055]    [Pg.37]    [Pg.65]    [Pg.89]   


SEARCH



Active type

Activity coefficient types of binary behavior

Amiloride Analogs as Inhibitors of the Urokinase-type Plasminogen Activator

Enantioselective Conjugate Addition Reactions Proceeding via Other Types of Activation

FSH stimulation of tissue-type plasminogen activator

Ferroxidase activity of the dinuclear centers in H-type ferritins

Mexiletine Derivatives as Orally Bioavailable Inhibitors of Urokinase-Type Plasminogen Activator

Of active-passive type metals

Structure activity relationship of scopadulan-type diterpenoid

Type of Active Sites

Types of Active Centers

© 2024 chempedia.info