Trienes, preparation

Of these three highly diastereoselective methods for accomplishing asymmetric IMDA reactions, the a-hydroxy ketone protocol" [trienes (154) and (155)] is the least convenient owing to the greater difficulty of triene preparation, the moderate reactivity of the trienes, and the destructive removal of the auxiliary. Consequently, the auxiliary systems developed by Evans and Oppolzer are more likely to find application in natural products synthesis. Indeed, Oppolzer has recently applied the IV-acyl sultam methodology to the asymmetric total synthesis of (-)-pulo upone (Figure 43). °... 

Chlorosulphonation of the 3-methyl ether of oestradiol 17-acetate, and subsequent treatment with various amines, has given rise to a series of 2-sulph-amoyl oestratrienes, and a number of /V-substituted sulphamoyl derivatives of 17a-ethynyl-oestradiol have also been made. Methane- and butane-sulphonamido-oestra-l,3,5(10)-trienes prepared from the 3-amino-analogue of oestrone have shown poor biological activity. 

COT is prepared by the polymerization of ethyne at moderate temperature and pressure in the presence of nickel salts. The molecule is non-planar and behaves as a typical cyclic olefin, having no aromatic properties. It may be catalytically hydrogenated to cyclo-octene, but with Zn and dil. sulphuric acid gives 1,3,6-cyclooclairiene. It reacts with maleic anhydride to give an adduct, m.p. 166 C, derived from the isomeric structure bicyclo-4,2,0-octa-2,4,7-triene(I) ... 

For some volatile aliphatic 1,2,3-trienes simple preparative methods have been b4-55... 

Diene carboxylates can be prepared by the reaction of alkenyl halides with acrylates[34]. For example, pellitorine (30) is prepared by the reaction of I-heptenyl iodide (29) with an acrylate[35]. Enol triflates are reactive pseudo-halides derived from carbonyl compounds, and are utilized extensively for novel transformations. The 3,5-dien-3-ol triflate 31 derived from a 4,5-unsaturated 3-keto steroid is converted into the triene 32 by the reaction of methyl acrylate[36]. 

Among several propargylic derivatives, the propargylic carbonates 3 were found to be the most reactive and they have been used most extensively because of their high reactivity[2,2a]. The allenylpalladium methoxide 4, formed as an intermediate in catalytic reactions of the methyl propargylic carbonate 3, undergoes two types of transformations. One is substitution of cr-bonded Pd. which proceeds by either insertion or transmetallation. The insertion of an alkene, for example, into the Pd—C cr-bond and elimination of/i-hydrogen affords the allenyl compound 5 (1.2,4-triene). Alkene and CO insertions are typical. The substitution of Pd methoxide with hard carbon nucleophiles or terminal alkynes in the presence of Cul takes place via transmetallation to yield the allenyl compound 6. By these reactions, various allenyl derivatives can be prepared. 

The alka-l,2,4-trienes (ailenylaikenes) 12 are prepared by the reaction of methyl propargyl carbonates with alkenes. Alkene insertion takes place into the Pd—C bond of the ailenyipailadium methoxide 4 as an intermediate and subsequent elimination of/3-hydrogen affords the 1,2,4-triene 12. The reaction proceeds rapidly under mild conditions in the presence of KBr. No reaction takes place in the absence of an alkali metal salt[4j. 

Organoboranes react with propargylic carbonates. Usually, addition of a base is essential for the Pd-catalyzed reactions of organoboranes, but the reaction with propargylic carbonates proceeds without addition of the base, because methoxide is generated in situ from carbonates. For example, the 1,2,4-triene 80 is prepared by the reaction of alkenylborane under neutral conditions[36]. 

I60C-Hydroxy Derivatives of Gorticoids and their Acetonides. The preparation of 16a-hydroxy-9a-fluoroprednisolone (48) from the 3,20-bisethylene ketal of hydrocortisone acetate (49) has been reported (73). The latter was dehydrated with thionyl chloride in pyridine to yield the 4,9(11),16-triene (50). The 16,17-unsaturated linkage was selectively hydroxylated with OsO /pyridine to yield the 16a,17a-diol (51), which was converted... 

Nylon 12 first beeame available on a semieommercial scale in 1963. The monomer, dodecanelactam, is prepared from butadiene by a multistaged reaction. In one proeess butadiene is treated with a Ziegler-type eatalyst system to yield the cyclic trimer, cyclododeca-1, 5, 9-triene. This may then be hydrogenated to give cyelododeeane, which is then subjeeted to direct air oxidation to give a mixture of cyclododecanol and cyclododecanone. Treatment of the mixture with... 

Since the stereochemistry of the triene system of LTB4 had not been determined prior to synthesis, a number of stereoisomers of LTB4 were prepared for purposes of definitive comparison of physical properties and bioactivity with biologically produced LTB4. The various stereoisomers of LTB4 were much less active biologically than LTB4 itself. 

Cross-conjugated dienones are quite inert to nucleophilic reactions at C-3, and the susceptibility of these systems to dienone-phenol rearrangement precludes the use of strong acid conditions. In spite of previous statements, A " -3-ketones do not form ketals, thioketals or enamines, and therefore no convenient protecting groups are available for this chromophore. Enol ethers are not formed by the orthoformate procedure, but preparation of A -trienol ethers from A -3-ketones has been claimed. Another route to A -trien-3-ol ethers involves conjugate addition of alcohol, enol etherification and then alcohol removal from la-alkoxy compounds. 

Acetylene is passed for 1 hr through a mixture consisting of 0.5 g (72 mg-atoms) of lithium in 100 ml of ethylene-diamine. A solution prepared from 1 g (3.5 mmoles) of rac-3-methoxy-18-methylestra-l,3,5(10)-trien-I7-one and 30 ml of tetrahydrofuran is then added at room temperature with stirring over a period of 30 min. After an additional 2 hr during which time acetylene is passed through the solution the mixture is neutralized with 5 g of ammonium chloride, diluted with 50 ml water, and extracted with ether. The ether extracts are washed successively with 10% sulfuric acid, saturated sodium hydrogen carbonate and water. The extract is dried over sodium sulfate and concentrated to yield a solid crystalline material, which on recrystallization from methanol affords 0.95 g (87%) of rac-3-methoxy-18-methyl-17a-ethynyl-estra-l,3,5(10)-trien-17jB-ol as colorless needles mp 161°. 

A solution of the monosodium salt of diacetylene in 300 ml of liquid ammonia is prepared from 13.8 g (0.6 g-atoms) sodium and 24.6 g (0.2 moles) l,4-dichlorobut-2-yne. To this mixture is added a suspension of 5 g (17.6 mmoles) 3-methoxyestra-l,3,5(10)-trien-17-one in anhydrous tetrahydrofuran at —40° and the reaction mixture is stirred and maintained at this temperature for 2 hr. Ammonium chloride is then added and the ammonia is allowed to evaporate overnight. The residual solids are extracted with methylene dichloride and the extracts washed with water, dried over magnesium sulfate, and evaporated at 70°. The resultant dark gum is... 

A solution of diazomethane in 2.4 liters ether, prepared from 177 g (1.71 moles) of A-nitrosomethylurea and 530 ml of 40% aqueous potassium hydroxide, is added to 26.4 g (0.81 moles) 17 -acetoxyandrosta-1,4,6-triene-3-one in 250 ml ether. After 6 days at room temperature the ether is removed by distillation at reduced pressure and the residue is chromatographed on 1.5 kg of silica gel (deactivated with water 10% v/w). The product is eluted with methylene dichloride and recrystallized from diisopropyl ether-methylene dichloride to give 11 g (37 %) 17 -acetoxyandrosta-4,6-dien-3-one-[2a,la-c]-A -pyrazoline mp 161° (dec.) —91° (CHCI3) ... 

Extension of the above method to 3-methoxyestra-3,5(10)-dien-17-one 17-ethylene ketal (46) prepared by base-catalyzed isomerization of 3-methoxy-estra-2,5(10)-dien-17-one 17-ketal (42) with potassium t-butoxide in dimethyl sulfoxide gives the isomeric tropone A-homo-estra-l,4,5(10)-triene-3,17-dione... 

Bromo-4-methoxy-A-homo-estra-2,4,5(10)-trien-17-one (44 0. 2g), is dissolved in formic acid, 2 ml of boron trifluoride etherate is added and the mixture is stirred vigorously at 0° for 2 hr. A brown mass ca. 0.12 g) is obtained after evaporation of the solvents at reduced pressure. This material is diluted with water and extracted with chloroform. The chloroform extracts are washed successively with water and saturated salt solution, dried over anhydrous magnesium sulfate and evaporated at reduced pressure to give 95 mg of a product which is purified by filtration through a column of neutral alumina and crystallization of the residue after evaporation of the solvent from ethyl acetate-petroleum ether. The resulting A-homo-estra-l(10),2,4a-triene-4,17-dione (45), mp 143-146°, is identical to the tropone (45) prepared from monoadduct 17-ketone (43a). 

The method of choice for preparing tropone (45) is to treat the initial mixture of monoadducts (43a) and (43b) with methanolic 1 TV hydrochloric acid to complete ketal hydrolysis and then carry out the pyridine rearrangement to give 3-bromo-4-methoxy-A-homo-estra-2,4,5(10)-trien-17-one (44) as described above for monoadduct 17-ketone (43b). 

This method has been successfully used to prepare 3-methoxy-D-homo-estra-1,3,5(10)-trien-17a-one (96)," 17al5-hydroxy-D-homo-androst-4-en-3-one (97a)" and 17a/ -hydroxy-D-homo-estr-4-en-3-one (97bT ... 

Step B Preparation of 3-Methoxy-17a-Methyl-19-Nor-A ° -Pregn3diene-20-ol — 500 cc of ammonia and a solution of 20 grams of 3-methoxy-17a -methyl-19-nor-A , ( >-pregna-triene-20-one were admixed with 400 cc of THF, and 10 cc of ethanol were added. The temperature was lowered to -35°C. 2.150 grams of lithium were added under an inert atmosphere and the reaction mixture was agitated for 15 minutes, after which 10 cc of ethanol and... 

Stage A Preparation of 17P-BenzoyloxyEstra-4,9,11-Trien-3-one — 0.400 g of 17/3-benzoyl-oxy-4,5-seco-estra-9,11 -diene-3,5-dione is dissolved in 4 cc of toluene under an inert atmosphere. The solution is cooled to 3°C, then 0.4Bcc is added of the solution of sodium tert-amyl-ate in anhydrous toluene, diluted by the addition of a further 4.8 cc of anhydrous toluene. 

Stage B Preparation of 17j -HydroxyEstra-4,9,11-Trien-3-one — 3 g of 17/3-benzoyloxy-estra-4,9,11 -trien-3-one, obtained as described in Stage A are dissolved in 15 cc of methanol. 0.03 g of hydroquinone is added, and the mixture Is taken to reflux while bubbling in nitrogen. Then 1.2 cc of 11% methanolic caustic potash is added and reflux is maintained for three hours, after which the reaction product Is acidified with 0.36 cc of acetic acid. 

The parent thionine system 1 up to now has not been prepared probably because the C-S bond in valence isomeric forms is too weak giving rise to facile rearrangement or decomposition. The obvious synthetic route, photochemical transformation of cyclooctatetraenccpisulfide 2 (9-thiabicyclo[6.1.0]nona-2,4,6-triene), does not lead to 1, but intriguingly to another valence isomer, the sulfur-bridged homotropylidene system 3.20... 

The intramolecular cycloaddition has proven to be the method of choice for the preparation of steroids. A diastereomeric mixture of 204, prepared from 191 and tosylate 203 has been cleanly converted to dl-estra-1,3,5(10)-trien-17-one (205) in 85% yield (equation 130). A second example of the intramolecular cycloaddition reaction is the formation of the cycloadduct (209), the key intermediate in a synthesis of the As-pidosperma alkaloid aspidospermine, upon heating 208 at 600 °C (equation 131)124. The sulfone 208 can be prepared by reaction of 3-ethyl-3,4,5,6-tetrahydropyridine (206) with the acid chloride 207. 

In 1995, and regrettably missed in last year s review, Klotgen and Wiirthwein described the formation of the 4,5-dihydroazepine derivatives 2 by lithium induced cyclisation of the triene 1, followed by acylation <95TL7065>. This work has now been extended to the preparation of a number of l-acyl-2,3-dihydroazepines 4 from 3 <96T14801>. The formation of the intermediate anion and its subsequent cyclisation was followed by NMR spectroscopy and the stereochemistry of the final product elucidated by x-ray spectroscopy. The synthesis of optically active 2//-azepines 6 from amino acids has been described <96T10883>. The key step is the cyclisation of the amino acid derived alkene 5 with TFA. These azepines isomerise to the thermodynamically more stable 3//-azepines 7 in solution. 

Oda et al. recently reported the synthesis of the highly strained trimeric meta-PAM 139 (Scheme 32) [82]. The required triene 140 was prepared from a,m-dial-dehyde 141 by an intramolecular McMurry coupling reaction. Bromination/dehy-drobromination of 140 furnished 139 as moderately stable, colorless crystals which decomposed above 180°C. The greater degree of strain in 139 compared to... 

---