Treatment, drinking water industrial effluent

Groundwater is vulnerable to pollution by chemicals carried by rainwater, leaching from waste sites or from waste water carrying industrial or agricultural effluent. Treatment of drinking water may remove some, but not all, of these contaminants. Some polycarbonate or metal water pipes that are lined with epoxy resin lacquers may release bisphenol A. 

Part C comprises the appendices. It includes guidance on the most likely sources of potential contaminants and on identifying chemicals that could be of concern in particular circumstances. The appendices address potential sources of chemicals considered in the WHO drinking-water guidelines (WHO, 2004 WHO, 2006), chemicals potentially discharged in effluents from industrial sources, and the association of pesticides with crops and crop types. This information is presented in an accessible format that will help users to determine the chemical hazards that can arise in the catchment, in treatment and in distribution, in large, medium and small water supplies. 

Most research work on the use of supercritical water has been conducted batchwise and involved non-analytical determinative applications. Thus, supercritical water oxidation (SCWO) was proposed as an alternative treatment for hazardous waste disposal [191] and also as a commercial tool for decomposing trichloroethylene, dimethyl sulphoxide and isopropyl alcohol on a pilot plant scale [192]. Current commercially available equipment (the aqua Critox" system) is usable with industrial and municipal sludge, mixed (radioactive and organic, liquid and solid) waste and military waste. This commercially available treatment has a number of advantages, namely (a) because it uses an on-site treatment method, it avoids the need to transport hazardous materials (b) it ensures complete destruction of organic wastes and allows reuse of the effluent as process water with results that meet the regulations for drinking water and (c) no licence for effluent or air emissions is needed. 

EXPOSURE ROUTES most probably is occupational exposure dermal contact inhalation natural fires petroleum refining coal tar distillation combustion of wood, coal, oil, propane, gasoline, and diesel fuels industrial effluents municipal wastewater treatment facilities waste incinerators smoked and barbecued foods contaminated drinking water supplies recreation activities at contaminated waterways... 

Water Treatmeat and Supply. Before water is consumed, it has to be collected first from either underground or above-ground sources. Therefore, source control is one of the most important tasks of water supply. Except for a few municipalities where the source water derived from deep aquifers, source water has to be treated to remove contaminants such as pathogenic bacteria, heavy metals, and pesticide residues. The process of treatment involves the removal of suspended solids and the use of chemicals or ultraviolet (UV) radiation to disinfect unwanted organisms so that the effluent water satisfies quality requirements dictated by the Federal Safe Drinking Water Act. For water used by industrial plants such as paper mills or nuclear power plants, special treatment is needed and its discharge is regulated. 

This process is widely used for the production of drinking and process water from rivers and sea water, and the treatment of industrial effluents which contain heavy metals [66]. 

---