Transition metal complexes cycloaddition reactions

Various unsaturated cyclic 7t-ligands undergo, within a transition-metal complex, cycloaddition reactions and rearrangements with simultaneous formation of cyclopropane subunits. This is observed with cycloheptatriene ehromium and iron complexes such as 4 which give cycloaddition products, e.g. 

For reviews of carbene complexes and transition metal mediated cycloaddition reactions of alkynes in organic synthesis see a) Dotz KH (1984) Angew Chem 96 573 Angew Chem Int Ed Engl 23 587 b) Schore NE (1988) Chem Rev 88 1081 c) Casalnuova JA, Schore NE (1995) Organomettalic cycloaddition reactions of acetylenes. In Stang PJ, Diederich F (eds) Modern acetylene chemistry, VCH, Weinheim, p 139 d) de Meijere A (1996) Pure Appl Chem 68 61... 

Metallacycles are also featured in Chapters 2 and 3 of this volume. Cobalt- and nickel-based metallacycles are key cataljrtic intermediates in Transition-Metal-Catalyzed Cycloaddition Reactions of Bicy-clo[2.2.1]heptadienes by Professor Mark Lautens and Dr. William Tam of the University of Toronto (Chapter 2). The high sttain energy of norbomadiene makes possible many of the interesting processes covered in this informative chapter. It is followed by a comprehensive review of the State of the Art in Selective Hetero- and Carbocyclic Synthesis Mediated by Cyclometallated Complexes ... 

Schmidt reaction of ketones, 7, 530 from thienylnitrenes, 4, 820 tautomers, 7, 492 thermal reactions, 7, 503 transition metal complexes reactivity, 7, 28 tungsten complexes, 7, 523 UV spectra, 7, 501 X-ray analysis, 7, 494 1 H-Azepines conformation, 7, 492 cycloaddition reactions, 7, 520, 522 dimerization, 7, 508 H NMR, 7, 495 isomerization, 7, 519 metal complexes, 7, 512 photoaddition reactions with oxygen, 7, 523 protonation, 7, 509 ring contractions, 7, 506 sigmatropic rearrangements, 7, 506 stability, 7, 492 N-substituted mass spectra, 7, 501 rearrangements, 7, 504 synthesis, 7, 536-537... 

In the nitrone cycloaddition reactions catalyzed by the l ,J -DBFOX/Ph transition metal complexes also, the diastereo- and enantioselectivities were found to depend upon the presence of MS 4 A [71]. Thus, both the selectivities were much lowered in the iron(II) or nickel(II) complex-catalyzed reactions without MS 4 A,... 

Monodentate dipolarophiles such as acrolein, methacrolein, and a-bromoacrolein could be successfully utilized in the l ,J -DBFOX/Ph-transition metal complex-catalyzed asymmetric nitrone cycloadditions [76]. The reactions of N-benzylideneani-line N-oxide with acrolein in the presence of the nickel(II) aqua complex R,R-DBF0X/Ph-Ni(C104)2 3H20 (10mol%) and MS 4 A produced a mixture of two regioisomers (5-formyl/4-formyl regioisomers ca 3 1). However, enantio-... 

Cycloaddition reactions catalysed by transition metal complexes are an important tool in the construction of a wide range of carbo- and hetero-cyclic systems, such as benzene, pyridines, triazoles, etc. [7]. In general, these reactions are extremely atom-efficient and involve the formation of several C-C bonds in a single step. Among the innumerable possible catalytic systems for the cycloaddition reaction the NHC-metal complexes have received special attention [7c]. 

In this chapter, synthesis, structure, and reactions of various classes of diazaphospholes have been reviewed. Recently used synthetic methods and variations for obtaining diversely substituted diazaphospholes have been discussed. On account of the cycloadditions on P=C bond of [1,4,2]- and [l,2,3]diazaphospholes, a number of organophos-phorus compounds incorporating a bridgehead phosphorus atom have become accessible. Recently reported complexation reactions of diazaphospholes, illustrate their capability to form transition metal complexes via different coordination modes. 

Even more than [6 + 4] and [8 + 2] cycloaddition reactions, the [2 + 2 + 2] cycloaddition reactions require a very well preorganized orientation of the three multiple bonds with respect to each other. In most cases, this kind of cycloaddition reaction is catalyzed by transition metal complexes which preorientate and activate the reacting multiple bonds111,324. The rarity of thermal [2 + 2 + 2] cycloadditions, which are symmetry allowed and usually strongly exothermic, is due to unfavorable entropic factors. High temperatures are required to induce a reaction, as was demonstrated by Berthelot, who described the synthesis of benzene from acetylene in 1866325, and Ullman, who described the reaction between nor-bomadiene and maleic anhydride in 1958326. As a consequence of the limiting scope of this chapter, this section only describes those reactions in which two of the participating multiple bonds are within the same molecule. 

Cobalt, as its CpCo(CO)2 complex, has proven to be especially suited to catalyze [2 + 2 + 2] cycloadditions of two alkyne units with an alkyne or alkene. These cobalt-mediated [2 + 2 + 2] cycloaddition reactions have been studied in great detail by Vollhardt337. The generally accepted mechanism for these cobalt mediated cycloadditions, and similar transition metal mediated cycloadditions in general, has been depicted in equation 166. Consecutive co-ordination of two triple bonds to CpCo(CO)2 with concomitant extrusion of two molecules of carbon monoxide leads to intermediates 578 and 579 via monoalkyne complex 577. These react with another multiple bond to form intermediate 580. The conversion of 578 to 580 is said to be kinetically favored over that of 579 to 580. Because intermediates like 580 have never been isolated, it is still unclear whether the next step is a Diels-Alder reaction to form the final product or an insertion to form 581. The exact circumstances might determine which pathway is followed. 

Cycloaddition refers to a process of unsaturated moieties forming a metallacyclic compound. It is sometimes categorised under oxidative additions, but we prefer this separate listing. Examples of the process are presented in Figure 2.22. Metal complexes which actually have revealed these reactions are M = L2Ni for reaction a, M = Cp2Ti for reactions b and c, M = Ta for d, and M = (RO)3W for e. The latter examples involving metal-to-carbon multiple bonds have only been observed for early transition metal complexes, the same ones mentioned under a-elimination, 2.20. 

Lewis acid-catalyzed cycloaddihon is also a powerful synthehc method, and various types of cycloaddihon have been reported. In parhcular, enantioselective variants using chiral Lewis acids have been comprehensively studied some of these were used as key reactions for natural product syntheses [5]. However, they generally require one or more heteroatoms in the substrates, such as enones or enoates, to which (chiral) Lewis acids can coordinate. In conhast, in the case of transition-metal-catalyzed cycloadditions, the metals coordinate direchy to the tt-electron and activate unsaturated motifs, which means that the heteroatom(s) are unnecessary. Moreover, the direct coordinahon to the reachon site can realize highly enantioselechve reachon using chiral transihon-metal complexes. 

Beside [2+2+2] cycloaddition, [4+2] and [5+1] cycloadditions represent other approaches for the construction of six-membered ring systems. In parhcular, the intermolecular and intramolecular [4+2] cycloadditions of diene and alkyne have been extensively studied, and a variety of transition-metal complexes-including those of Fe, Ni and Rh-have been reported as efficient catalysts. The first enanh-oselective reaction was achieved with a chiral Rh complex, although the substrates were limited to dienynes with a substituent on the diene terminus [36]. Later, Shibata and coworkers developed an intramolecular and enanhoselective [4+2] cycloaddition using an Ir-BDPP (l,3-bis(diphenylphosphino)pentane) complex (Scheme 11.24) [37], where dienynes with an unsubstituted diene terminus were transformed into bicyclic cyclohexa-1,4-diene with up to 98% ee. 

Transition-metal-promoted cycloaddition is of much interest as a powerful tool for synthesis of carbocyclic stmcture in a single step. Utilization of carbon monoxide as a component of the cycloaddition reaction is now widely known as the Pauson-Khand reaction, which results in cyclopentenone formation starting from an alkyne, an alkene, and carbon monoxide mediated by cobalt catalyst. Although mechanistic understanding is limited, a commonly accepted mechanism is shown in Scheme 4.16. Formation of dicobalt-alkyne complex followed by alkene... 

Mono-functionalization of Cyg affords, preferrably, C(l)-C(2) adducts (type a) (Figure 13.3). In some cases, for example, upon nucleophilic cyclopropanations they even represent the exclusively formed monoadducts [1-3,17]. Typical examples of addition reactions that afford monoadducts are epoxidations [18,19], osmylation [9], transition metal complex formations [20, 21], hydrogenation [13, 22], many cycloadditions [1, 2] and additions of nucleophiles [23]. For the formation and the chemical transformation of azahomo[70]fullerenes see also Chapter 12 (Schemes 12.4 and 12.5). 

In a study Rh-catalyzed cycloaddition of unactivated substrates, specifically, vinylallenes and acetylenes, is described.656 Appropriate catalysts were selected on the basis of a study of the bonding interactions of the reactants and transition metals. For this reaction a complex prepared in situ from [Rh(COD)2]OTf and P[OCH(CF3)2]3, one of the most strongly electron-accepting ligands available, was used. Under the conditions applied, even ethylene, one of the most sluggish... 

It appears likely that transient metallacyclobutanes are involved in a variety of organic reactions which are catalyzed by transition metal complexes. Thus, cycloadditions of activated alkenes to strained hydrocarbons such as quadricyclane and bicyclo[2.1.0]pentane are catalyzed by complexes such as Ni(CH2=CHCN)2 and probably involve initial formation of a nickelacyclobutane (Scheme 2) (79MI12200). The nature of the organometallic intermediates in related metal-catalyzed rearrangements (72JA7757) and retro-cyclo-addition reactions (76JA6057) of cyclopropanoid hydrocarbons, e.g. bicyclo[n.l.O]alkanes, has been discussed. 

The (5)-tryptophan-derived oxazaborolidenes utilized in this aldol study have been previously examined by Corey as effective catalysts for enantioselective Diels-Alder cycloaddition reactions [6]. Corey has documented unique physical properties of the complex and has proposed that the electron-rich indole participates in stabilizing a donor-acceptor interaction with the metal-bound polarized aldehyde. More recently, Corey has formulated a model exemplified by 7 in which binding by the aldehyde to the metal is rigidified through the formation of a hydrogen-bond between the polarized formyl C-H and an oxyanionic ligand [7], The model illustrates the sophisticated design elements that can be incorporated into the preparation of transition-metal complexes that lead to exquisite control in aldehyde enantiofacial differentiation. 

The reaction of methylenecyclopropanes with transition metal complexes is well known to promote a catalytic a-ir cycloaddition reaction with unsaturated compounds, in which a trimethylenemethane complex might exist71-76. Recently, much interest has been focused on the interaction of strained silicon-carbon bonds with transition metal complexes. In particular, the reaction of siliranes with acetylene in the presence of transition metal catalysts was extensively investigated by Seyferth s and Ishikawa s groups77-79. In the course of our studies on alkylidenesilirane, we found that palladium catalyzed reaction of Z-79 and E-79 with unsaturated compounds displayed ring expansion reaction modes that depend on the (Z) and (E) regiochemistry of 79 as well as the... 

For other very useful reactions of alkynyl-A3-iodanes involving Diels-Alder reactions, 1,3-dipolar cycloadditions, and reactions with transition metal complexes, see the excellent reviews of Koser [39] and Stang [208,209]. 

Cycloadditions are useful for the preparation of cyclic ompounds. Several thermal and photoactivated cycloadditions, typically [4+2] (Diels-Alder reaction), are known. They proceed with functionalized electronically activated dienes and monenes. However, various cycloaddition reactions of alkenes and alkynes without their electronical activation, either mediated or catalysed by transition metal complexes under milder conditions, are known, offering a useful synthetic route to various cyclic compounds in one step. Transition metal complexes are regarded as templates and the reactions proceed with or without forming metallacycles [49]. 

Diazaphospholes 4 and 5 are colorless to pale yellow distillable liquids or crystalline solids that are stable to oxidation by air and do not react with elemental sulfur. They are readily hydrolyzed to give the hydrazone from which they originate and phosphorus acid. While only a few reactions of 1/7-1,2,3-diazaphospholes 4 are reported, the chemistry of the 2//-isomers 5 is well studied. In CHEC-II(1996), the following reactions of 1,2,3-diazaphos-pholes are described in detail N-protonation and alkylation, polar addition to the P=C bond and substitution at C-4, cycloaddition reactions, substituent reactions, and the formation of transition metal complexes <1996CHEC-II(4)771>. 

The 1,2,4,3-triazaphospholes are colorless or pale yellow distillable liquids or crystalline solids. They are not oxidized by air and are reluctant to react with sulfur. Three isomeric heterocyclic systems of 277-1,2,4,3-triazaphospholes 15, 177-1,2,4,3-triazaphospholes 16, and 477-1,2,4,3-triazaphospholes 17 are known and they differ considerably in their behavior <1996CHEC-II(4)771>. The synthesis of 1,2,4,3-triazaphospholes and reactivity of different isomers of 1,2,4,3-triazaphospholes in the reactions at a ring nitrogen, in the addition to the P=N bond, oxidative addition to the ring phosphorus, cycloaddition reactions, and the formation of transition metal complexes are systematically covered in CHEC-II(1996) <1996CHEC-II(4)771>. The 1,3,4,2-thiadiazaphospholium ions 18 are only briefly mentioned in CHEC-II(1996) and no new results on their chemistry have been published in the last decade. 

Cu(I) triflate has been used as an olefin cycloaddition photoassistance agent as in reactions (42) and (43).127 Detailed study of reaction (43) shows that it is very likely that it is photoexcitation of a Cu(alkene)2 complex that results in the dimerization.127) This provides a second good example of the possible utility of transition metal photoassistance involving reactions between coordinated ligands. The nature of the excited state leading to reactions (40)-(43) is not known. 

Metal complexes enable one to employ molecules that are thermally unreactive toward cycloadditions by taking advantage of their ability to be activated through complexation. Most of the molecules activated by transition-metal complexes involve C-C unsaturated bonds such as alkynes, alkenes, 1,3-dienes, allenes, and cyclopropanes. In contrast, carbonyl functionalities such as aldehydes, ketones, esters, and imines seldom participate in transition-metal-catalyzed carbonylative cycloaddition reactions. Recently, such a transformation was reported via the use of ruthenium complexes. 

Among the carbonylative cycloaddition reactions, the Pauson-Khand (P-K) reaction, in which an alkyne, an alkene, and carbon monoxide are condensed in a formal [2+2+1] cycloaddition to form cyclopentenones, has attracted considerable attention [3]. Significant progress in this reaction has been made in this decade. In the past, a stoichiometric amount of Co2(CO)8 was used as the source of CO. Various additive promoters, such as amines, amine N-oxides, phosphanes, ethers, and sulfides, have been developed thus far for a stoichiometric P-K reaction to proceed under milder reaction conditions. Other transition-metal carbonyl complexes, such as Fe(CO)4(acetone), W(CO)5(tetrahydrofuran), W(CO)5F, Cp2Mo2(CO)4, where Cp is cyclopentadienyl, and Mo(CO)6, are also used as the source of CO in place of Co2(CO)8. There has been significant interest in developing catalytic variants of the P-K reaction. Rautenstrauch et al. [4] reported the first catalytic P-K reaction in which alkenes are limited to reactive alkenes, such as ethylene and norbornene. Since 1994 when Jeong et al. [5] reported the first catalytic intramolecular P-K reaction, most attention has been focused on the modification of the cobalt catalytic system [3]. Recently, other transition-metal complexes, such as Ti [6], Rh [7], and Ir complexes [8], have been found to be active for intramolecular P-K reactions. 

The term intramolecular enyne metathesis describes two types of processes. One involves a [2+2] cycloaddition of a multiple bond and a transition-metal carbene complex and the other is an oxidative cyclization catalyzed by low-valent transition-metal complexes, for example, Pt, Pd and Ru. The latter reaction is also called a skeletal reorganization. Both processes lead to similar products (Eq. 84). 

Keywords Catalysis Cycloaddition Cyclopentenones Pauson-Khand reaction Transition metal complexes... 

Ionic liquids can be used as replacements for many volatile conventional solvents in chemical processes see Table A-14 in the Appendix. Because of their extraordinary properties, room temperature ionic liquids have already found application as solvents for many synthetic and catalytic reactions, for example nucleophilic substitution reactions [899], Diels-Alder cycloaddition reactions [900, 901], Friedel-Crafts alkylation and acylation reactions [902, 903], as well as palladium-catalyzed Heck vinylations of haloarenes [904]. They are also solvents of choice for homogeneous transition metal complex catalyzed hydrogenation, isomerization, and hydroformylation [905], as well as dimerization and oligomerization reactions of alkenes [906, 907]. The ions of liquid salts are often poorly coordinating, which prevents deactivation of the catalysts. 

When compounds (7) were heated with alkyne in excess, two types of complexes, both involving alkyne coupling, are formed. A compound with the stoichiometry Co2(CO)4(C4R2CO)2, formed mainly from terminal alkynes having one bulky substituent R, represents derivatives of Co2(CO)g where two CO groups at either metal are replaced by a cyclopentadienone ligand. This compound type represents one of the many instances where alkynes combine with CO in the presence of a transition metal fragment to yield mostly cyclopentadienones, often complexed to the metal this cycloaddition reaction is similar to the Pauson-Khand scheme except for the use of an alkyne in place on an alkene (see also Section 5.1.4 and Scheme 26). The reaction eventually proceeds further to liberate an arene. Thus, from the use of t-BuC=CH, the alkyne trimerization product 1,2,4-tri-f-Bu-benzene was isolated. 

In contrast to the conventional methods of cycloaddition, capable of forming only one type of product, the reactions catalysed by metal complexes are fairly flexible. This versatility offers numerous possibilities for elaborating a number of methods for the preparation of structurally diverse structures. However, there is still no consistent theory for transition metal complex catalysis which enables one to predict which catalyst and/or conditions are to be employed for the desired transformation. Results are often achieved through intuition and not reasoning. However, who would dare to negate the usefulness of tools like intuition and mere luck if they produce spectacular results like those met in the area of transition metal catalysis "... 

---