Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Thin layer chromatography compounds

The fraction, eluted with 5% ether in hexane, gives after purification by thin layer chromatography compound 190 (Figs. 82 and 107) with an Rf value of 0.97. This chromane derivative is identical with one of the components, obtained by treating colupulone in acidic medium (see 12.4. and 14.1.). [Pg.287]

The nitration of the 2-anilino-4-phenylselenazole (103) is much more complicated. Even careful nitration using the nitrate-sulfuric acid method leads to the formation of a mixture of variously nitrated compounds in an almost violent reaction. By the use of column chromatography as well as thin-layer chromatography a separation could be made, and the compounds could be partly identified by an independent synthesis. Scheme 33 shows a general view of the substances prepared. Ring fission was not obser ed under mild conditions. [Pg.243]

A large number of variously 2-, 4-, and 5-substituted thiazoles with alkyl, aryl, hydroxy, methylthio, mercapto, halo, and nitro groups have been analyzed by thin-layer chromatography on silica and alumina by the Stahl s technique (167, 170, 172). Among the many systems recommended for the elution of these compounds are the following ... [Pg.362]

Antioxidants (qv) have a positive effect on oils when present in the proper concentration. Sterols and tocopherols, which are natural antioxidants, may be analy2ed by gas-Hquid chromatography (glc), high performance Hquid chromatography (hplc), or thin-layer chromatography (tic). Synthetic antioxidants maybe added by processors to improve the performance or shelf life of products. These compounds include butylatedhydroxyanisole (BHA), butylated hydroxytoluene (BHT), / fZ-butyUiydroquinone (TBHQ), and propyl gallate. These materials may likewise be analy2ed by glc, hplc, or tic. Citric acid (qv), which functions as a metal chelator, may also be deterrnined by glc. [Pg.134]

The successful separation of xanthate-related compounds by high performance Hquid chromatography (hplc) methods has been reported (91—93). The thin-layer chromatography procedure has been used to determine the nature of the alcohols in a xanthate mixture. A short mn of 3 cm at a development time of 25 min gives a complete separation of C —alkanol xanthates (94). [Pg.367]

Immobilization. The abiUty of cyclodextrins to form inclusion complexes selectively with a wide variety of guest molecules or ions is well known (1,2) (see INCLUSION COMPOUNDS). Cyclodextrins immobilized on appropriate supports are used in high performance Hquid chromatography (hplc) to separate optical isomers. Immobilization of cyclodextrin on a soHd support offers several advantages over use as a mobile-phase modifier. For example, as a mobile-phase additive, P-cyclodextrin has a relatively low solubiUty. The cost of y- or a-cyclodextrin is high. Furthermore, when employed in thin-layer chromatography (tic) and hplc, cyclodextrin mobile phases usually produce relatively poor efficiencies. [Pg.97]

M. T. Belay and C. E. Poole, Determination of vanillin and related flavor compounds in natural vanilla exti acts and vanilla-flavored foods by thin layer chromatography and automated multiple development , Chromatographia 37 365-373(1993). [Pg.249]

Thin-Layer Chromatography. A study using thin-layer chromatography both for separating components of a pyrethrum extract and for purifying single components has been made. Other reports have mentioned the use of thin-layer chromatography in various connections related to pyrethrin analysis. Stahl (14) reported on pyre-thrins I and II and evidence for presence of other compounds from... [Pg.62]

The multiplicity of responses makes thin-layer chromatography not particularly suited for pyrethrum analysis, either qualitative or quantitative. It did confirm, however, that the crude oleoresin contains several pyrethroid compounds in substantial quantity, as previously shown by gas chromatography work. [Pg.64]

Thin-layer chromatography was also used in an attempt further to purify fractions that had been separated by column or gas chromatography. Rather precise Rf values for several compounds were... [Pg.64]

Figures 2 through 9 are infrared spectra of fractions collected from partition columns, gas chromatography, thin-layer chromatography, or a combination of these separation techniques. Figure 10 is the infrared spectrum of a compound isolated by gas chromatography after hydrolysis of a pyrethrum concentrate. In this case the compound is a long-chain ester. All the infrared spectra were made with a Perkin-Elmer Model 221 instrument. The following operating parameters were used. A liquid demountable cell with a 0.01-mm path length was employed. Figures 2 through 9 are infrared spectra of fractions collected from partition columns, gas chromatography, thin-layer chromatography, or a combination of these separation techniques. Figure 10 is the infrared spectrum of a compound isolated by gas chromatography after hydrolysis of a pyrethrum concentrate. In this case the compound is a long-chain ester. All the infrared spectra were made with a Perkin-Elmer Model 221 instrument. The following operating parameters were used. A liquid demountable cell with a 0.01-mm path length was employed.
Removal of solvent from the extracts leaves a residue that is purified by dry-column chromatography.2 The residue is dissolved in 40 ml. of acetone in a 300-ml., round-bottomed flask, 30 g. of silica gel (Note 8) is added, and the acetone is removed with a rotary evaporator. The resulting solid mixture is placed on top of 360 g. of dry silica gel (Note 8) packed in flexible nylon tubing (Note 9), and the column is developed with 420 ml. of 10 1 (vjv) benzene-acetone. Approximately 150 ml. of solvent drips from the bottom of the column toward the end of development, and this eluent is collected in 25-ml. fractions and checked for product by thin layer chromatography (Note 10). The column itself is then cut into 2-cm. sections, the silica gel in each section is eluted with three 25-ml. portions of ethyl acetate, and the eluent from each section is analyzed by thin-layer chromatography (Note 10). Combination of all the product-containing fractions yields 1.2-1.5g. (40-47%) of the benzylated compound as an oil, n 1.6083 (Notes 11 and 12). [Pg.79]

Tezuka s group (Tezuka and Ando, 1985 Tezuka et al., 1986) was able to isolate and characterize the benzenediazo ether of 1-naphthol (6.10). They stirred a solid mixture of the molecular complex 6.9 formed between an a-azohydroperoxide acid and benzene with an excess of 1-naphthol at room temperature in the dark for several hours. The separation of this solid by thin layer chromatography (silica gel, with a benzene-ethyl acetate mixture [9 1] as eluent) afforded the diazo ether 6.10 as a yellow oil in 17 % yield, together with 4- and 2-phenylazo-l-naphthol (6.11 and 6.12, 4% and 42%, respectively), 4-phenylbenzaldehyde (32%), benzoic acid (23%), and traces of other compounds (Scheme 6-6). Higher yields of the diazo ether (up... [Pg.114]

Analytical thin-layer chromatography was performed on E. Merck silica gel 60 F254 plates (0.25 mm) and compounds were visualized by dipping the plates in a cerium sulfate-ammonium molybdate solution followed by heating. [Pg.120]

One-dimensional thin-layer chromatography. This method, based on the work of Wolf and McPherson, will determine more than 0.1% terminal 8-sultones in the neutral oil. This implies that if the AOS contains 1% neutral oil, greater than 30 ppm (active matter basis) of terminal 5-sultones can be determined. Some samples contain a compound having an R( of approximately 0.03 U less than the 5-sultones. This should not be reported as terminal 8-sultones. C14 and C16 terminal 8-sultones have the same retention (R 0.35-0.55, depending on the humidity) and therefore appear as one spot. [Pg.450]

Because of the instability of many of the compounds involved, it is necessary to determine the chemical recoveries in all cases. This requires the use of macro quantities (10 mg up to several hundred mg) of carriers and target compounds. This, in turn, makes it impractical to use the various thin-layer methods, such as paper and thin-layer chromatography and paper electrophoresis, although such methods have proved useful in identifying products and in checking the purity of fractions. The separation methods now most commonly used are column chromatography and sublimation. [Pg.89]

A curious case of stepwise formation and subsequent decomposition was observed on thermal annealing of CpMn(CO)3, as is shown in Fig. 4. Zahn showed that CpMn(CO)3 undergoes only a small rapid rise to a flat plateau. Thus the effect shown in Fig. 4 must clearly result from the presence of an impurity which was carried along with the parent compound in the separation procedure. In the case cited, thin-layer chromatography in benzene was used. The compound which increases and decreases in its activity so strikingly has not yet been identified. [Pg.98]

Paper chromatography (PC) and thin layer chromatography (TLC) have been used since the 1940s. Preparative PC on Whatman 3 paper, analytical PC on Whatman 1 paper, and analytical TLC on microcrystalline cellulose, silica gel, or polyamide have been applied with a variety of solvents and the behaviors of anthocyanins have been similar in all media. Two-dimensional TLC allows the separation of several compounds and has been nsed to clarify the anthocyanin compositions of different commodities. ... [Pg.488]

In reversed-phase thin-layer chromatography (RP-TLC), the choice of solvents for the mobile phase is carried out in a reversed order of strength, comparing with the classical TLC, which determines a reversed order of values of compounds. The reversed order of separation assumes that water is the main component of the mobile phase. Aqueous mixmres of some organic solvents (diethyl ether, methanol, acetone, acetonitrile, dioxane, i-propanol, etc.) are used with good results. [Pg.86]


See other pages where Thin layer chromatography compounds is mentioned: [Pg.377]    [Pg.439]    [Pg.70]    [Pg.420]    [Pg.344]    [Pg.244]    [Pg.179]    [Pg.18]    [Pg.374]    [Pg.516]    [Pg.200]    [Pg.25]    [Pg.558]    [Pg.13]    [Pg.875]    [Pg.116]    [Pg.449]    [Pg.284]    [Pg.81]    [Pg.307]    [Pg.8]    [Pg.106]    [Pg.384]    [Pg.356]    [Pg.438]    [Pg.453]    [Pg.116]    [Pg.11]    [Pg.150]    [Pg.62]    [Pg.77]   
See also in sourсe #XX -- [ Pg.306 ]




SEARCH



Arsenic compounds thin-layer chromatography

Layered compounds

Phenolic compounds thin-layer chromatography

© 2024 chempedia.info