Thermall expansion coefficient

Glass has a very low thermal expansion coefficient the materials joined with glass have to be similar in expansion or must be duetile, while staying vacuum tight. Even with best-matched materials skilled craftsmanship is asked for the joining process. 

Thermal Properties. Many commercial glass-ceramics have capitalized on thek superior thermal properties, particularly low or zero thermal expansion coupled with high thermal stabiUty and thermal shock resistance properties that are not readily achievable in glasses or ceramics. Linear thermal expansion coefficients ranging from —60 to 200 x 10 j° C can be obtained. Near-zero expansion materials are used in apphcations such as telescope mirror blanks, cookware, and stove cooktops, while high expansion frits are used for sealing metals. 

Metal Crystal 22° C stmeture 1000° c Melting point, °C Density, g/cm Thermal expansion coefficient at RT, ioV°c Thermal conductivity at RT, W/(m-K)" Young s modulus, GPa "... 

Low Expansion Alloys. Binary Fe—Ni alloys as well as several alloys of the type Fe—Ni—X, where X = Cr or Co, are utilized for their low thermal expansion coefficients over a limited temperature range. Other elements also may be added to provide altered mechanical or physical properties. Common trade names include Invar (64%Fe—36%Ni), F.linvar (52%Fe—36%Ni—12%Cr) and super Invar (63%Fe—32%Ni—5%Co). These alloys, which have many commercial appHcations, are typically used at low (25—500°C) temperatures. Exceptions are automotive pistons and components of gas turbines. These alloys are useful to about 650°C while retaining low coefficients of thermal expansion. Alloys 903, 907, and 909, based on 42%Fe—38%Ni—13%Co and having varying amounts of niobium, titanium, and aluminum, are examples of such alloys (2). 

Thermal Expansion. Coefficients of linear thermal expansion and linear expansion during transformation are listed in Table 7. The expansion coefficient of a-plutonium is exceptionally high for a metal, whereas those of 5- and 5 -plutonium are negative. The net linear increase in heating a polycrystalline rod of plutonium from room temperature to just below the melting point is 5.5%. 

Because of the high functional values that polyimides can provide, a small-scale custom synthesis by users or toU producers is often economically viable despite high cost, especially for aerospace and microelectronic appHcations. For the majority of iudustrial appHcations, the yellow color generally associated with polyimides is quite acceptable. However, transparency or low absorbance is an essential requirement iu some appHcations such as multilayer thermal iusulation blankets for satellites and protective coatings for solar cells and other space components (93). For iutedayer dielectric appHcations iu semiconductor devices, polyimides having low and controlled thermal expansion coefficients are required to match those of substrate materials such as metals, ceramics, and semiconductors usediu those devices (94). 

Material CAS Registry Number Formula Mp, °C Tme specific gravity, g/cm Mean J/(kg-K)" specific heat Temp range, °C Thermal conductivity, W/(m-K) 500° 1000° C C Linear thermal expansion coefficient peTC X 10 from 20-1000°C... 

The Rheometric Scientific RDA II dynamic analy2er is designed for characteri2ation of polymer melts and soHds in the form of rectangular bars. It makes computer-controUed measurements of dynamic shear viscosity, elastic modulus, loss modulus, tan 5, and linear thermal expansion coefficient over a temperature range of ambient to 600°C (—150°C optional) at frequencies 10 -500 rad/s. It is particularly useful for the characteri2ation of materials that experience considerable changes in properties because of thermal transitions or chemical reactions. 

Data for thermal movement of various bitumens and felts and for composite membranes have been given (1). These describe the development of a thermal shock factor based on strength factors and the linear thermal expansion coefficient. Tensile and flexural fatigue tests on roofing membranes were taken at 21 and 18°C, and performance criteria were recommended. A study of four types of fluid-appHed roofing membranes under cycHc conditions showed that they could not withstand movements of <1.0 mm over joiats. The limitations of present test methods for new roofing materials, such as prefabricated polymeric and elastomeric sheets and Hquid-appHed membranes, have also been described (1). For evaluation, both laboratory and field work are needed. 

Cordierite [12182-53-5] Mg Al Si O g, is a ceramic made from talc (25%), kaolin (65%), and Al O (10%). It has the lowest thermal expansion coefficient of any commercial ceramic and thus tremendous thermal shock resistance. It has traditionally been used for kiln furniture and mote recently for automotive exhaust catalyst substrates. In the latter, the cordierite taw materials ate mixed as a wet paste, extmded into the honeycomb shape, then dried and fired. The finished part is coated with transition-metal catalysts in a separate process. 

A summary of physical and chemical constants for beryUium is compUed ia Table 1 (3—7). One of the more important characteristics of beryUium is its pronounced anisotropy resulting from the close-packed hexagonal crystal stmcture. This factor must be considered for any property that is known or suspected to be stmcture sensitive. As an example, the thermal expansion coefficient at 273 K of siagle-crystal beryUium was measured (8) as 10.6 x 10 paraUel to the i -axis and 7.7 x 10 paraUel to the i -axis. The actual expansion of polycrystalline metal then becomes a function of the degree of preferred orientation present and the direction of measurement ia wrought beryUium. 

---