The Analytical Sample

A solution of 2 g of sodium borohydride in 5 ml of water is added at room temperature to a solution of 1 g of 3a-hydroxy-5jS-pregnane-l 1,20-dione in 15 ml of methanol. Almost immediately, crystals begin to form. After the mixture has been kept overnight, the precipitate is collected with suction to yield 0.8 g of the diol, mp 230-232°. The analytical sample, crystallized once more from aqueous methanol, melts at 231.4-232.6° [a]p 31.2° (acetone). Reported mp 236-238°. 

When 3a,17a-dihydroxy-5jS-pregnane-ll,20-dione is allowed to react at room temperature overnight with sodium borohydride in aqueous methanol, no crystals form and only 5j5-pregnane-3a,l ljS,17a,20j5-tetrol is isolated in good yield. If the reaction is halted at the end of 3 h y the addition of water and extraction with chloroform, it is possible xo obtain a 55% yield of 3a,17a,20jS-trihydroxy-5j5-pregnan-ll-one, mp 218-220°,after recrystallization of the chloroform residue from aqueous methanol. The analytical sample, crystallized once more, has mp 219.0-220.6° [a][, 36° (acetone), reported mp 220° [aJu 38°. 

P,17P-Dihydroxyestr-4-en-3-one 1-acetate. The 6-hydroxy compound is removed from the column with 15-17% acetone. Recrystallization of the crude product (1.92 g) from acetone-hexane gives 1.25 g of crystals melting at 165-166° and 0.13 g melting at 162-164° (12.1% yield). When the analytical sample was prepared from the same solvent mixture, the melting point rose to 192-193° (Lit 166° 189-190°) [a] -59.5° (CHCI3) 2, 236 m/i (fi 14,500). 

A solution of 85.8 g (0.2 moles) of 3/ -acetoxy-27-norchoIest-5-en-25-one in 500 ml of anhydrous thiophen-free benzene is added to a Grignard solution prepared from 24.3 g (1 g-atom) of magnesium and 149 g (1.05 moles) of freshly distilled methyl iodide in 575 ml of anhydrous ether. The mixture is refluxed for 3 hr and allowed to stand overnight. After cooling to 5° the complex is decomposed by the slow addition of 200 ml of ice water and 400 ml of 50% acetic acid solution, and steam distilled until no more oil passes over. The residual product is filtered, washed with water and dried at 80°. Crystallization from methanol gives 70 g (87%) of cholest-5-ene-3)5,25-diol mp 179.5-181°. The analytical sample melts at 181.5-182.5° [a]o —39° (CHCI3). 

A total of 50 ml (0.15 moles) of a 3 ethereal solution of methylmagnesium bromide is added slowly to a vigorously stirred solution of 5.8 g (12.5 mmoles) or 3,3 20,20-bisethylenedioxy-5a,6a-epoxy-5a-pregnane-ll/l,17a,21-triol in 400 ml of tetrahydrofuran. The solution is heated under reflux for 24 hr, cooled and treated with 32 ml of saturated ammonium chloride solution. The supernatant is decanted and the residue is washed with several portions of tetrahydrofuran. The combined supernatants are evaporated and extracted with ethyl acetate, washed with saturated salt solution, dried and concentrated to give 4,55 g (75%) of 3,3 20,20-bisethylenedioxy-6 -methyl-5a-pregnane-5a,ll, 17a,21-tetrol mp 170-172° after crystallisation from acetone-petroleum ether. The analytical sample is crystallized from acetone-petroleum ether mp 175-177° [aJo —11° (CHCI3). 

Recrystallization from glacial acetic acid gives 4.6 g (90%) mp 225-227°. The analytical sample has mp 227-228°. 

Chloro-1 -methyl-5-phenyl-s-trizolo[4,3-a]quinoline A stirred mixture of 6triethyl-orthoacetate (0.925 g,0.0057 mol) and xylene (100 ml) was refluxed, under nitrogen, for 2 hours 40 minutes. During this period the ethanol formed in the reaction was removed by distillation through a short,glass helix-packed column. The mixture was concentrated to dryness In vacuo and the residue was crystallized from methanol-ethyl acetate to give 1.28 g of 7-chloro-1-methyl-5-phenyl-s-triazolo[4,3-a]-quinoline (83.9% yield). The analytical sample was crystallized from methylene chloride methanol and had a melting point 252.5°-253.5°C. 

The ether extract is evaporated to dryness to give about 500 mg of a crude product. From the ether solution there is obtained about 290 mg of yellow crystals, MP 220° to 236°C which is 17a,20,20,21-bis(methylenedioxy)-11 (3-formyloxy-2-hydroxy-methylene-6,16a-di-methyl-4,6-pregnadiene-3-one. The analytical sample is recrystallized from ethyl acetate and has a melting point of 249° to 255°C, [oIq -217°, I R 5.81 and 8.37 ji. From the mother liquor is obtained about 127 mg of 17a,20,20-21-bis(methylenedioxy)-11(3-hydroxy-2-hydroxymethylene-6,16a-dimethyl-4,6-pregnadiene-3-one. The analytical sample is recrystallized from ether and has a melting point of 200° to 204°C, [alo -197°, IR 6.05 to 6.2 and 6.4 jd. 

The above crude bromohydrin was mixed with 2.5 grams of potassium acetate and 60 cc of acetone and refluxed for 6 hours, at the end of which the acetone was distilled, water was added to the residue and the product was extracted with methylene chloride. The extract was washed with water, dried over anhydrous sodium sulfate and the solvent was evaporated. Recrystallization of the residue from methanol furnished 800 mg of the 16,21-diacetate of 6o-fluoro-9(3,11(3-oxido-A -pregnene-16o,l7a,2l-triol-3,20-dione with MP 120° to 124°C by chromatography of the mother liquors on silica gel there was obtained 180 milligrams more of the same compound with MP 117° to 119°C. The analytical sample was obtained by recrystallization from methanol it showed MP 125° to 127°C. 

A mixture of this material with 500 ml of toluene end 30 g of manganese dioxide wes heated to reflux for 1 A hours. The mangenese dioxide wes seperated by filtration over Celite. The filtrate wes evaporated and the residue was crystallized from ether to yield 6-chloro-6-(2-fluorophenyl)-1 -methyl-4H-imidazo[1,5-a] [1, 4] -benzodiazepine, melting point 152°C to 154°C. The analytical sample was racrystallized from methylene chloride/hexane. 

A mixture of 27 parts by weight of 3,4-methylenedioxyaniline and 43 parts by weight of diethyl ethoxymethylenemalonate is heated at 80° to 90°C for 3 hours. The mixture is then heated at 80° to 90°C for 1 hour under about 15 mm pressure to remove the byproduct ethyl alcohol formed. The residue is recrystallized from ligroin (BP 60° to 90°C) to give diethyl [(3,4-methylenedioxyanilino)methylene] malonate as a yellow solid melting at 100° to 102°C. The analytical sample from ligroin melts at 101° to 102°C. 

A mixture of 26 parts of 3-carbethoxy-6,7-methylenedioxy-4-hydroxy-quinoline, 16 parts of sodium hydroxide and 50 parts of dimethylformamide is heated at 70° to 75°C for 2 hours, then 31 parts of ethyl iodide is added over 1 hour with continued heating and stirring. After an additional 3 to 4 hours of heating (at 70° to 75°C) and stirring, the mixture is diluted with 500 parts of water, refluxed for 3 to 4 hours, acidified with concentrated hydrochloric acid and filtered to yield 18 to 22 parts of 1-ethyl-1,4-dihydro-6,7-methylene-dioxy-4-oxo-3-quinoline-carboxylic acid, MP 309° to 314°C (decomposes). The analytical sample from dimethylformamide melts at 314° to 316°C (decomposes). 

It must be stressed, however, that the whole object may be the analytical sample, e.g. a specimen of moon-rock. Ideally this sample would be analysed by non-destructive methods. Occasionally the bulk material may be homogeneous (some water samples) and then only one increment may be needed to determine the properties of the bulk. This increment should be of suitable size to provide samples for replicate analyses. 

The limit of detection (LOD) is an important criterion of the efficiency of an analytical method. It is characterized by the smallest value of the concentration of a compound in the analytical sample. The detectable amount of anilide compounds is in the range 0.01-0.5 ng by GC and 0.1 ng by HPLC. The limit of quantitation (LOQ) ranges from 0.005 to 0.01 mg kg for vegetables, fruits and crops. The recoveries from untreated plant matrices with fortification levels between 10 and 50 times the LOD and the LOQ are 70-120%. The relative standard deviation (RSD) at 10-50 times the level of the LOD and LOQ are <10 % and <20%, respectively. 

In the laboratory, soil samples collected in the held are mixed thoroughly and reduced in size to laboratory samples. The air-dried soils are passed through a 2-mm sieve in order to remove stones and roots, then the water content of the soil is calculated after drying at 105 °C for 5h. If the analytical samples cannot be analyzed immediately after drying and sieving, they should be stored at about —20 °C in glass or Teflon bottles fltted with screw-caps. 

A new nonweighted linear calibration curve is to be generated with every set of samples analyzed. The calibration standards are interspersed among the analytical samples, preferably with a standard between every two analytical samples, and injected into the HPLC/OECD system. The calibration curve is generated by plotting peak height of the detector response against the concentration for each calibration standard of EMA and methylated HEMA. 

The following is a general method for ground and surface water samples. Interferences in particular samples may require modification of this method. The analytical sample size is 200 mL, but the volume may be varied depending on the concentration of analytes in the sample. 

Detector calibration. A calibration curve is generated for every set of samples with a minimum of five standard levels. The standards are interspersed among the analytical samples of each set. The first and last sample in each analytical sample set must be a standard. 

Inject the cleaned-up sample into the GC/MSD or GC/FTD system operated under the same conditions as employed for standardization. Compare the peak areas of the analytical samples with the calibration curve. Determine the concentrations of pyraflufen-ethyl, E-15 (E-1), E-16 (E-2) and E-3 present in the sample. 

Compare the peak areas of the analytical samples with the calibration curve. Determine the concentration of E-2 present in the sample using following equation ... 

It is often difficult to define where sample extraction ends and cleanup procedures begin. Sample extracts may be injected directly into a gas or liquid chromatograph in certain cases, but this will be dependent on the analyte, sample matrix, injection, separation and detection system, and the limit of determination (LOD) which is required. It is also more likely that matrix-matched calibration standards will be needed in order to obtain robust quantitative data if no cleanup steps are employed. 

The LOD is an important criterion of the efficiency of an analytical method. It defines the smallest value of the concentration of a compound in the analytical sample. Detectable amounts of neonicotinoid insecticides range from 0.5 to 1 ng by HPLC. The LOQ ranges from 0.005 to 0.01 mg kg for vegetables, fruits and crops. 

---