Temperature dependence reaction enthalpy

An implicit assumption of the foregoing treatment is that A// remains independent of temperature over the range investigated. This is very nearly correct in general, and is particularly the case given that studies of reactions in solution are usually conducted over a temperature interval of only some 30-50°. In certain circumstances the temperature profiles show curvature outside the experimental error. Such cases have, or appear to have, temperature-dependent activation enthalpies. Here we explore one of the reasons for that another is given in Section 7.3. 

Standard heat data are usually compiled at 298 K, and to calculate the heat of reaction at an arbitrary temperature, the temperature dependency of enthalpies of reaction species have to be considered. These are generally dependent on temperature as follows... 

Reaction orders of cathodic reaction kinetics Electrolyte film thickness Temperature-dependent standard enthalpy of reactionj... 

The validity of equation (A2.1.70) has sometimes been questioned when enthalpies of reaction detennined from calorimetric experiments fail to agree with those detennined from the temperature dependence of the equilibrium constant. The thennodynamic equation is rigorously correct, so doubters should instead examine the experunental uncertainties and whether the two methods actually relate to exactly the same reaction. 

It follows from this discussion that all of the transport properties can be derived in principle from the simple kinetic dreoty of gases, and their interrelationship tlu ough k and c leads one to expect that they are all characterized by a relatively small temperature coefficient. The simple theory suggests tlrat this should be a dependence on 7 /, but because of intermolecular forces, the experimental results usually indicate a larger temperature dependence even up to for the case of molecular inter-diffusion. The Anhenius equation which would involve an enthalpy of activation does not apply because no activated state is involved in the transport processes. If, however, the temperature dependence of these processes is fitted to such an expression as an algebraic approximation, tlren an activation enthalpy of a few kilojoules is observed. It will thus be found that when tire kinetics of a gas-solid or liquid reaction depends upon the transport properties of the gas phase, the apparent activation entlralpy will be a few kilojoules only (less than 50 kJ). 

The temperature dependence of reaction rates permits evaluation of the enthalpy and entropy components of the free energy of activation. The terms in Eq. (4.4) corresponding to can be expressed as... 

The sensitivity of the equilibrium constant to temperature, therefore, depends upon the enthalpy change AH . This is usually not a serious limitation, because most reaction enthalpies are sufficiently large and because we commonly require that the perturbation be a small one so that the linearization condition is valid. If AH is so small that the T-jump is ineffective, it may be possible to make use of an auxiliary reaction in the following way Suppose the reaction under study is an acid-base reaction with a small AH . We can add a buffer system having a large AH and apply the T-jump to the combined system. The T-jump will alter the Ka of the buffer reaction, resulting in a pH jump. The pH jump then acts as the forcing function on the reaction of interest. 

The Arrhenius activation energy,3 obtained from the temperature dependence of the three-halves-order rate constant, is Ea = 201 kJ mol-1. This is considerably less than the standard enthalpy change for the homolysis of acetaldehyde, determined by the usual thermodynamic methods. That is, reaction (8-5) has AH = 345 kJ mol-1. At first glance, this disparity makes it seem as if dissociation of acetaldehyde could not be a predecessor step. Actually, however, the agreement is excellent when properly interpreted. 

With a reaction enthalpy of A RH = -170 kJ/g mol the sulfonation with S03 is strongly exothermic. As the color of the acid is dependent not only on the residence time but also to a considerable extent on the reaction temperature, it is necessary to have an effective thermal dissipation. This applies to all of the reactors listed in Table 13. The falling film reactors, of which there are various designs, have the advantage that a very short residence time can be realized [152]. 

These values can be found in Appendix 2A. Because the difference between AH°(T2) and AH°(Tj) depends on the difference in the heat capacities of the reactants and products—a difference that is normally small—in most cases, the reaction enthalpy depends only weakly on the temperature and, for small ranges of temperature, can be treated as a constant. 

A recent paper by Leffek and Matheson (1971) nicely complements this work, as it describes the results of a careful investigation of the temperature dependence of the kinetic isotope effect in the reaction studied by Kaplan and Thornton (1967). It is found that AAH = 134 + 30 cal mol and dd/S = 0-15 + 0-09 cal mol deg , demonstrating that the isotope effect is primarily due to an enthalpy difference, and providing support for the steric interpretation suggested by Kaplan and Thornton (1967). 

In addition to chemical reactions, the isokinetic relationship can be applied to various physical processes accompanied by enthalpy change. Correlations of this kind were found between enthalpies and entropies of solution (20, 83-92), vaporization (86, 91), sublimation (93, 94), desorption (95), and diffusion (96, 97) and between the two parameters characterizing the temperature dependence of thermochromic transitions (98). A kind of isokinetic relationship was claimed even for enthalpy and entropy of pure substances when relative values referred to those at 298° K are used (99). Enthalpies and entropies of intermolecular interaction were correlated for solutions, pure liquids, and crystals (6). Quite generally, for any temperature-dependent physical quantity, the activation parameters can be computed in a formal way, and correlations between them have been observed for dielectric absorption (100) and resistance of semiconductors (101-105) or fluidity (40, 106). On the other hand, the isokinetic relationship seems to hold in reactions of widely different kinds, starting from elementary processes in the gas phase (107) and including recombination reactions in the solid phase (108), polymerization reactions (109), and inorganic complex formation (110-112), up to such biochemical reactions as denaturation of proteins (113) and even such biological processes as hemolysis of erythrocytes (114). 

Theoretically, the problem has been attacked by various approaches and on different levels. Simple derivations are connected with the theory of extrathermodynamic relationships and consider a single and simple mechanism of interaction to be a sufficient condition (2, 120). Alternative simple derivations depend on a plurality of mechanisms (4, 121, 122) or a complex mechanism of so called cooperative processes (113), or a particular form of temperature dependence (123). Fundamental studies in the framework of statistical mechanics have been done by Riietschi (96), Ritchie and Sager (124), and Thorn (125). Theories of more limited range of application have been advanced for heterogeneous catalysis (4, 5, 46-48, 122) and for solution enthalpies and entropies (126). However, most theories are concerned with reactions in the condensed phase (6, 127) and assume the controlling factors to be solvent effects (13, 21, 56, 109, 116, 128-130), hydrogen bonding (131), steric (13, 116, 132) and electrostatic (37, 133) effects, and the tunnel effect (4,... 

As to the computation of reaction enthalpies and entropies, AH and AS , the same arguments apply if they have been obtained from the temperature dependence of the equilibrium constant. A different situation arises vdien AH is determined directly from calorimetry, say with a constant relative error 6. The standard entropy AS then has the standard error... 

Many workers have offered the opinion that the isokinetic relationship is confined to reactions in condensed phase (6, 122) or, more specially, may be attributed to solvation effects (13, 21, 37, 43, 56, 112, 116, 124, 126-130) which affect both enthalpy and entropy in the same direction. The most developed theories are based on a model of the half-specific quasi-crystalline solvation (129, 130), or of the nonideal conformal solutions (126). Other explanations have been given in terms of vibrational frequencies involving solute and solvent (13, 124), temperature dependence of solvent fluidity in the quasi-crystalline model (40), or changes of enthalpy and entropy to produce a hole in the solvent (87). 

The standard-potential, E°, shows a temperature dependence called the "zero shift , according to its direct relationship with the free enthalpy for the standard conditions chosen, - AG° = RTIn K (eqn. 2.37), and the Arrhenius equation for the reaction rate,... 

A high reaction entropy increase influences the reaction temperature of the thermochemical dissociation equilibrium. Assuming that the reaction enthalpy and the reaction entropy have no significant temperature dependence, this simplified equation can be derived. 

If the dependence of the EMF on the temperature is known, then the reaction enthalpy AH of the reaction proceeding outside the cell can be found. Cells with a positive EMF, E, and a negative temperature quotient BE 1ST release heat in addition to electrical energy during reversible processes... 

If the dependence of the EMF of a cell on temperature is known, the same value of the reaction enthalpy AH can be determined as if the reaction took place outside the cell. 

The temperature dependence of reaction enthalpies can be determined from the heat capacity of the reactants and products. When a substance is heated from T to T2 at a particular pressurep, assuming no phase transition is taking place, its molar enthalpy change from AHm (T]) to AHm (T2) is... 

K can we assume the reaction enthalpy Ais independent of temperature. We otherwise correct for the temperature dependence of AH with the Kirch ho ff equation (Equation (3.19)). 

Exothermic chemical reactions, 25 299-301 catalytic converter, 10 45 formaldehyde manufacture by, 12 115 temperature-dependent enthalpy changes for, 25 303-305 Exothermic polymerization, 10 709 Exotic radioactive decays, 21 305-306 Expandable polystyrene (EPS),... 

A fascinating point, especially to physical chemists, is the potential theoretical efficiency of fuel cells. Conventional combustion machines principally transfer energy from hot parts to cold parts of the machine and, thus, convert some of the energy to mechanical work. The theoretical efficiency is given by the so-called Carnot cycle and depends strongly on the temperature difference, see Fig. 13.3. In fuel cells, the maximum efficiency is given by the relation of the useable free reaction enthalpy G to the enthalpy H (AG = AH - T AS). For hydrogen-fuelled cells the reaction takes place as shown in Eq. (13.1a). With A//R = 241.8 kJ/mol and AGr = 228.5 under standard conditions (0 °C andp = 100 kPa) there is a theoretical efficiency of 95%. If the reaction results in condensed H20, the thermodynamic values are A//R = 285.8 kJ/ mol and AGR = 237.1 and the efficiency can then be calculated as 83%. 

Anion Binding. This discussion illustrates how valuable information on enthalpy changes of surface reactions (either from temperature dependence or from direct calorimetric measurements) are. Zeltner et al. (1986) have studied calorimetrically the surface complex formation of phosphate and salicylate on goethite. They show that these reactions are exothermic (at pH = 4) with AHadS values at low coverage ( 10 %) of ca. -24 kJ mol 1, they argue tentatively that these values indicate biden-tate surface complex formation. They also show that -AH decreases with increasing surface coverage. 

Free energy variations with temperature can also be used to estimate reaction enthalpies. However, few studies devoted to the temperature dependence of adsorption phenomena have been published. In one such study of potassium octyl hydroxamate adsorption on barite, calcite and bastnaesite, it was observed that adsorption increased markedly with temperature, which suggested the enthalpies were endothermic (26). The resulting large positive entropies were attributed to loosening of ordered water structure, both at the mineral surface and in the solvent surrounding octyl hydroxamate ions during the adsorption process, as well as hydrophobic chain association effects. 

Note that these equations do not depend on any assumption regarding the temperature dependence of the activation enthalpy and entropy. In fact, when calculating each d nk/dl value, the temperature dependences of A //0 (A C ) and A 5° (A C°/T) cancel. Hence, the reaction enthalpy at the temperature T is given by... 

The method is thus identical to the one described for gas-phase reactions. Thus, the activation energies of the forward and reverse reactions can be obtained at a temperature T from either simple or modified Arrhenius plots, and their difference is equal to the reaction enthalpy at the same temperature. Note, however, that equation 3.39 is valid for any elementary reaction in solution, whatever the molec-ularity, whereas in the case of gas-phase reactions, the equivalent expression depends on the reaction molecularity (see equations 3.19 and 3.22). 

---