Extraction supported liquid

Several manufacturers introduced products amenable for this solid-supported LLE and for supported liquid extraction (SLE). The most common support material is high-purity diatomaceous earth. Table 1.8 lists some commercial products and their suppliers. The most widely investigated membrane-based format is the supported liquid membrane (SLM) on a polymeric (usually polypropylene) porous hollow fiber. The tubular polypropylene fiber (short length, 5 to 10 cm) is dipped into an organic solvent such as nitrophenyl octylether or 1-octanol so that the liquid diffuses into the pores on the fiber wall. This liquid serves as the extraction solvent when the coated fiber is dipped... 

Johnson, C. R. Zhang, B. Fantauzzi, P. Hocker, M. Yager, K. M. Libraries of/V-Alkylaminoheterocycles from Nucleophilic Aromatic Substitution with Purification by Solid Supported Liquid Extraction, Tetrahedron 1998, 54, 4097. 

Liquid-Liquid Extraction and Supported-Liquid Extraction... 

Pan JW, Jiang XY, Chen YL (2010) Automatic supported liquid extraction (SLE) coupled with HILIC-MS/MS an application to method development and validation of erlotinib in human plasma. Pharmaceutics 2 105-118... 

The Analysis of Trihalomethanes in Drinking Water by Liquid Extraction US Environmental Protection Agency, Environmental Monitoring and Support Laboratory, Cincinnati, OH, 9 Sept. 1977. 

Liquid-liquid extraction is a basic process already applied as a large-scale method. Usually, it does not require highly sophisticated devices, being very attractive for the preparative-scale separation of enantiomers. In this case, a chiral selector must be added to one of the liquid phases. This principle is common to some of the separation techniques described previously, such as CCC, CPC or supported-liquid membranes. In all of these, partition of the enantiomers of a mixture takes place thanks to their different affinity for the chiral additive in a given system of solvents. 

In supported liquid membranes, a chiral liquid is immobilized in the pores of a membrane by capillary and interfacial tension forces. The immobilized film can keep apart two miscible liquids that do not wet the porous membrane. Vaidya et al. [10] reported the effects of membrane type (structure and wettability) on the stability of solvents in the pores of the membrane. Examples of chiral separation by a supported liquid membrane are extraction of chiral ammonium cations by a supported (micro-porous polypropylene film) membrane [11] and the enantiomeric separation of propranolol (2) and bupranolol (3) by a nitrate membrane with a A/ -hexadecyl-L-hydroxy proline carrier [12]. 

As described above, the application of classical liquid- liquid extractions often results in extreme flow ratios. To avoid this, a completely symmetrical system has been developed at Akzo Nobel in the early 1990s [64, 65]. In this system, a supported liquid-membrane separates two miscible chiral liquids containing opposite chiral selectors (Fig. 5-13). When the two liquids flow countercurrently, any desired degree of separation can be achieved. As a result of the system being symmetrical, the racemic mixture to be separated must be added in the middle. Due to the fact that enantioselectivity usually is more pronounced in a nonaqueous environment, organic liquids are used as the chiral liquids and the membrane liquid is aqueous. In this case the chiral selector molecules are lipophilic in order to avoid transport across the liquid membrane. 

Classical LLEs have also been replaced by membrane extractions such as SLM (supported liquid membrane extraction), MMLLE (microporous membrane liquid-liquid extraction) and MESI (membrane extraction with a sorbent interface). All of these techniques use a nonporous membrane, involving partitioning of the analytes [499]. SLM is a sample handling technique which can be used for selective extraction of a particular class of compounds from complex (aqueous) matrices [500]. Membrane extraction with a sorbent interface (MESI) is suitable for VOC analysis (e.g. in a MESI- xGC-TCD configuration) [501,502]. 

The production process for (S)-phenylalanine as an intermediate in aspartame perpetuates the principle of reracemization of the nondesired enantiomer (Figure 4.5) in a hollow fiber/ liquid membrane reactor. Asymmetric hydrolysis of the racemic phenylalanine isopropylester at pH 7.5 leads to enantiopure phenylalanine applying subtilisin Carlsberg. The unconverted enantiomer is continuously extracted via a supported liquid membrane [31] that is immobilized in a microporous membrane into an aqueous solution of pH 3.5. The desired hydrolysis product is charged at high pH and cannot, therefore, be extracted into the acidic solution [32]. 

Sastre, A. M. Madi, A. Alguacil, F. J. Solvent extraction of Au(CN)2" and application to facilitated supported liquid... 

Automated Liquid-Liquid Extraction without Solid Support.31... 

FIGURE 1.25 Principle of operation of solid-supported liquid-liquid extraction from aqueous or plasma samples. (Reproduced with permission from Varian, Inc.)... 

In the past decade, several novel solvent-based microextraction techniques have been developed and applied to environmental and biological analysis. Notable approaches are single-drop microextraction,147 small volume extraction in levitated drops,148 flow injection extraction,149 150 and microporous membrane- or supported liquid membrane-based two- or three-phase microextraction.125 151-153 The two- and three-phase microextraction techniques utilizing supported liquid membranes deposited in the pores of hollow fiber membranes are the most explored for analytes of wide ranging polarities in biomatrices. This discussion will be limited to these protocols. 

The principle of a three-phase membrane extraction is illustrated in Figure 1.28. An organic solvent is immobilized in the pores of a porous polymeric support consisting of a flat filter disc or a hollow fiber-shaped material. This supported liquid membrane (SLM) is formed by treating the support material with an organic solvent that diffuses into its pores. The SLM separates an aqueous... 

FIGURE 1.34 Apparatus for liquid membrane extraction. (A) Manual off-line instrument based on peristaltic pump. (B) Instrument with online connection to HPLC for environmental studies. (C) Experimental set-up for supported liquid membrane HPLC determination of biomolecules in blood plasma or urine.153 (Reproduced with permission from the authors.)... 

---