Sulfur groups Sulfuric acid

The element is a steel-white metal, it does not tarnish in air, and it is the least dense and lowest melting of the platinum group of metals. When annealed, it is soft and ductile cold-working greatly increases its strength and hardness. Palladium is attacked by nitric and sulfuric acid. 

Halogenation (e.g., bromination) takes place in chloroform for the 2,4-dialkylthiazoles, and the majority of studies have been of 2,4-dimethylthiazole (227, 228). In other cases and in acetic or stronger acids, substitution occurs at the 5-position and is promoted by electronreleasing groups in the 2-position. When the releasing group is in the 4-(or 5-)-position, steric hindrance may decrease the yield of substitution at the 5- (or 4-) position. Nevertheless, the thiazole nucleus is not very reactive since 4-methylthiazole and 2.5-dimethylthiazole are inert in dilute sulfuric acid with bromine (229-231). 

Oxidation (Section 11 13) Oxidation of alkylben zenes occurs at the benzylic position of the alkyl group and gives a benzoic acid derivative Oxidiz mg agents include sodium or potassium dichro mate in aqueous sulfuric acid Potassium perman ganate (KMn04) is also an effective oxidant... 

Nitration Warming benzene with a mixture of nitric acid and sulfuric acid gives nitrobenzene A nitro group (—NO2) replaces one of the ring hydrogens... 

Sulfur Acids. Organic oxy acids of sulfur, that is, —SO3H, —SO2H, and —SOH, are named sulfonic acid, sulfinic acid, and sulfenic acid, respectively. In subordinate use, the respective prefixes are sulfo-, sulfino, and sulfeno-. The grouping —SO2—O—SO2— or —SO—O—SO is named sulfonic or sulfinic anhydride, respectively. 

A group of aminoxanthenes, ie, pyra2oloxanthenes, is used as color formers ia pressure or heat-sensitive imaging papers (43). These compounds are colorless, but, upon contact with acidic electron-accepting material, are converted to resonance forms that are lightly colored. An example is stmcture [58294-05-6] (35), which forms upon the condensation of A[,A/-diethyl-y -aminophenol with phthalic anhydride, followed by addition of 6-hydroxyinda2ole ia 80% sulfuric acid (44). 

Acetic anhydride adds to acetaldehyde in the presence of dilute acid to form ethyUdene diacetate [542-10-9], boron fluoride also catalyzes the reaction (78). Ethyfldene diacetate decomposes to the anhydride and aldehyde at temperatures of 220—268°C and initial pressures of 14.6—21.3 kPa (110—160 mm Hg) (79), or upon heating to 150°C in the presence of a zinc chloride catalyst (80). Acetone (qv) [67-64-1] has been prepared in 90% yield by heating an aqueous solution of acetaldehyde to 410°C in the presence of a catalyst (81). Active methylene groups condense acetaldehyde. The reaction of isobutfyene/715-11-7] and aqueous solutions of acetaldehyde in the presence of 1—2% sulfuric acid yields alkyl-y -dioxanes 2,4,4,6-tetramethyl-y -dioxane [5182-37-6] is produced in yields up to 90% (82). 

The amide group is readily hydrolyzed to acrylic acid, and this reaction is kinetically faster in base than in acid solutions (5,32,33). However, hydrolysis of N-alkyl derivatives proceeds at slower rates. The presence of an electron-with-drawing group on nitrogen not only facilitates hydrolysis but also affects the polymerization behavior of these derivatives (34,35). With concentrated sulfuric acid, acrylamide forms acrylamide sulfate salt, the intermediate of the former sulfuric acid process for producing acrylamide commercially. Further reaction of the salt with alcohols produces acrylate esters (5). In strongly alkaline anhydrous solutions a potassium salt can be formed by reaction with potassium / /-butoxide in tert-huty alcohol at room temperature (36). 

Esters. Most acryhc acid is used in the form of its methyl, ethyl, and butyl esters. Specialty monomeric esters with a hydroxyl, amino, or other functional group are used to provide adhesion, latent cross-linking capabihty, or different solubihty characteristics. The principal routes to esters are direct esterification with alcohols in the presence of a strong acid catalyst such as sulfuric acid, a soluble sulfonic acid, or sulfonic acid resins addition to alkylene oxides to give hydroxyalkyl acryhc esters and addition to the double bond of olefins in the presence of strong acid catalyst (19,20) to give ethyl or secondary alkyl acrylates. 

In 1973 the Semiconductor Equipment and Materials Institute (SEMI) held its first standards meeting. SEMI standards are voluntary consensus specifications developed by the producers, users, and general interest groups in the semiconductor (qv) industry. Examples of electronic chemicals are glacial acetic acid [64-19-7] acetone [67-64-17, ammonium fluoride [12125-01 -8] and ammonium hydroxide [1336-21 -6] (see Ammonium compounds), dichloromethane [75-09-2] (see Cm.OROCARBONSANDcm.OROHYDROCARBONs), hydrofluoric acid [7664-39-3] (see Eluorine compounds, inorganic), 30% hydrogen peroxide (qv) [7722-84-1] methanol (qv) [67-56-1] nitric acid (qv) [7697-37-2] 2-propanoI [67-63-0] (see Propyl alcohols), sulfuric acid [7664-93-9] tetrachloroethane [127-18-4] toluene (qv) [108-88-3] and xylenes (qv) (see also Electronic materials). 

Most phenohc foams are produced from resoles and acid catalyst suitable water-soluble acid catalysts are mineral acids (such as hydrochloric acid or sulfuric acid) and aromatic sulfonic acids (63). Phenohc foams can be produced from novolacs but with more difficulty than from resoles (59). Novolacs are thermoplastic and require a source of methylene group to permit cure. This is usually suppHed by hexamethylenetetramine (64). 

Acid mixtures containing nitric acid and a strong acid, eg, sulfuric acid, perchloric acid, selenic acid, hydrofluoric acid, boron trifluoride, or an ion-exchange resin containing sulfonic acid groups, can be used as the nitrating feedstock for ionic nitrations. These strong acids are catalysts that result in the formation of nitronium ions, NO" 2- Sulfuric acid is almost always used industrially since it is both effective and relatively inexpensive. 

Analytical and Test Methods. o-Nitrotoluene can be analyzed for purity and isomer content by infrared spectroscopy with an accuracy of about 1%. -Nitrotoluene content can be estimated by the decomposition of the isomeric toluene diazonium chlorides because the ortho and meta isomers decompose more readily than the para isomer. A colorimetric method for determining the content of the various isomers is based on the color which forms when the mononitrotoluenes are dissolved in sulfuric acid (45). From the absorption of the sulfuric acid solution at 436 and 305 nm, the ortho and para isomer content can be deterrnined, and the meta isomer can be obtained by difference. However, this and other colorimetric methods are subject to possible interferences from other aromatic nitro compounds. A titrimetric method, based on the reduction of the nitro group with titanium(III) sulfate or chloride, can be used to determine mononitrotoluenes (32). Chromatographic methods, eg, gas chromatography or high pressure Hquid chromatography, are well suited for the deterrnination of mononitrotoluenes as well as its individual isomers. Freezing points are used commonly as indicators of purity of the various isomers. 

Sulfation and Sulfonation. a-Olefin reactions involving the introduction of sulfur-containing functional groups have commercial importance. As with many derivatives of olefins, several of these products have appHcations in the area of surfactants (qv) and detergents. Typical sulfur reagents utilized in these processes include sulfuric acid, oleum, chlorosulfonic acid, sulfur trioxide, and sodium bisulfite. 

Peroxomonosulfuric acid [7722-86-3] H2SO, when pure, forms colorless crystals that melt with decomposition at 45°C. One of its protons is strong, as ia sulfuric acid, but its other proton, which is on the peroxide group, is weak (pH = 9.4). Peroxomonosulfuric acid is a strong oxidi2iag agent ... 

Ritter Reaction (Method 4). A small but important class of amines are manufactured by the Ritter reaction. These are the amines in which the nitrogen atom is adjacent to a tertiary alkyl group. In the Ritter reaction a substituted olefin such as isobutylene reacts with hydrogen cyanide under acidic conditions (12). The resulting formamide is then hydroly2ed to the parent primary amine. Typically sulfuric acid is used in this transformation of an olefin to an amine. Stoichiometric quantities of sulfate salts are produced along with the desired amine. 

Nitration. Direct nitration of aromatic amines with nitric acid is not a satisfactory method, because the amino group is susceptible to oxidation. The amino group can be protected by acetylation, and the acetylamino derivative is then used in the nitration step. Nitration of acetanilide in sulfuric acid yields the 4-nitro compound that is hydroly2ed to -rutroaruline [100-01-6]. 

Sodium Bisulfite. Sodium bisulfite [7631-90-5] NaHSO, is occasionally used to perform simultaneous reduction of a nitro group to an amine and the addition of a sulfonic acid group. For example, 4-amino-3-hydroxyl-l-naphthalenesulfonic acid [116-63-2] C qH NO S, is manufactured from 2-naphthol in a process which uses sodium bisulfite (59). The process involves nitrosation of 2-naphthol in aqueous medium, followed by addition of sodium bisulfite and acidification with sulfuric acid. 

Colorimetric Methods. Numerous colorimetric methods exist for the quantitative determination of carbohydrates as a group (8). Among the most popular of these is the phenol—sulfuric acid method of Dubois (9), which rehes on the color formed when a carbohydrate reacts with phenol in the presence of hot sulfuric acid. The test is sensitive for virtually all classes of carbohydrates. Colorimetric methods are usually employed when a very small concentration of carbohydrate is present, and are often used in clinical situations. The Somogyi method, of which there are many variations, rehes on the reduction of cupric sulfate to cuprous oxide and is appHcable to reducing sugars. 

---