Potassiums reactions with

CHEMICAL PROPERTIES combustible liquid forms dense soot stable under normal temperatures and pressures hazardous polymerization will not occur reacts with active metals such as aluminum, magnesium powders, sodium, and potassium reaction with strong bases and strong oxidizers FP (NA) LFL/UFL (6%. 15.5%) AT (460°C, 860°F) HC (NA) HF (-191.5 kJ/mol liquid at 25°C). 

Surprisingly, in several experiments carried out under a variety of conditions, formation of the / cyclohexyne derivative 19b from cyclohexene and la was never observed. This complex was prepared from cyclohexene with f(C5H5)2Co]/potassium. Reactions with this reagent usually do not proceed cleanly and generate a large amount of insoluble by-products. Nevertheless, separation of the products is usually less laborious, due to the absence of 3 and 4. As a second type of product, the tetranuclear /r4-alkyne cluster complexes 21 were formed in very low yield from the corresponding cycloalkenes and [(C5H5)2Co]/K. ° ... 

The reaction with acidified potassium manganate(VII) is used in the quantitative estimation of hydrogen peroxide. 

Copper(II) ions in aqueous solution are readily obtained from any copper-containing material. The reactions with (a) alkali (p. 430), (b) concentrated ammonia (p 413) and (c) hydrogen sulphide (p. 413) provide satisfactory tests for aqueous copper(II) ions. A further test is to add a hexacyanoferrate(II) (usually as the potassium salt) when a chocolate-brown precipitate of copper(II) hexacyanoferrate(II) is obtained ... 

Chakactkrisation of Unsaturatkd Aliphatic Hydrocarbons Unlike the saturated hydrocarbons, unsaturated aliphatic hydrocarbons are soluble in concentrated sulphuric acid and exhibit characteristic reactions with dUute potassium permanganate solution and with bromine. Nevertheless, no satisfactory derivatives have yet been developed for these hydrocarbons, and their characterisation must therefore be based upon a determination of their physical properties (boiling point, density and refractive index). The physical properties of a number of selected unsaturated hydrocarbons are collected in Table 111,11. 

Strictly speaking the alkyl halides are esters of the halogen acids, but since they enter into many reactions (t.g., formation of Grignard reagents, reaction with potassium cyanide to yield nitriles, etc.) which cannot be brought about by the other eaters, the alkyl halides are usually distinguished from the esters of the other inorganic acids. The preparation of a number of these is described below. 

The formation of ethyl isopropylidene cyanoacetate is an example of the Knoevenagel reaction (see Discussion before Section IV,123). With higher ketones a mixture of ammonium acetate and acetic acid is an effective catalyst the water formed is removed by azeotropic distillation with benzene. The essential step in the reaction with aqueous potassium cyanide is the addition of the cyanide ion to the p-end of the ap-double bond ... 

The independent preparation of potassium phthabmide (from a solution of phthalimide in absolute ethanol and potassium hydroxide in 75 per cent, ethanol) may be avoided in many cases by boiling phthalimide with the halide in the presence of anhydrous potassium carbonate. The N-substituted phthalimide (I) is frequently cleav with difficulty this is often facilitated by reaction with hydrazine hydrate to give an intermediate product, which is easily decomposed by hydrochloric acid to 3deld the insoluble hydrazide of phthaUc acid (II) and the primary amine (III) ... 

Xanthogenates—by reaction with aqueous potassium xanthogenate, and thence to mercaptans by treatment with potassium hydroxide, for example ... 

Aryl sulphonic acids, either free or in the form of tlieir sodium or potassium salts, are converted into the acid chlorides by reaction with phosphorus peutu-chloride or phosphorus oxychloride, for example ... 

The condensation of aldehydes and ketones with succinic esters in the presence of sodium ethoxide is known as the Stobbe condensation. The reaction with sodium ethoxide is comparatively slow and a httlo reduction of the ketonic compound to the carbinol usually occurs a shorter reaction time and a better yield is generally obtained with the more powerful condensing agent potassium ieri.-butoxide or with sodium hydride. Thus benzophenone condenses with diethyl succinate in the presence of potassium [Pg.919]

An ethereal solution of diazomethane free from alcohol may be prepared as follows such a solution is required, for example, in the Amdt-Eistert reaction with acid chlorides (compare Section VI,17). In a 100 ml. longnecked distilling flask provided with a dropping funnel and an efficient downward condenser, place a solution of 6 g. of potassium hydroxide in... 

Ultrapure iodine can be obtained from the reaction of potassium iodide with copper sulfate. Several other methods of isolating the element are known. 

In the first method a secondary acetylenic bromide is warmed in THF with an equivalent amount of copper(I) cyanide. We found that a small amount of anhydrous lithium bromide is necessary to effect solubilization of the copper cyanide. Primary acetylenic bromides, RCECCH Br, under these conditions afford mainly the acetylenic nitriles, RCsCCHjCsN (see Chapter VIII). The aqueous procedure for the allenic nitriles is more attractive, in our opinion, because only a catalytic amount of copper cyanide is required the reaction of the acetylenic bromide with the KClV.CuCN complex is faster than the reaction with KCN. Excellent yields of allenic nitriles can be obtained if the potassium cyanide is added at a moderate rate during the reaction. Excess of KCN has to be avoided, as it causes resinifi-cation of the allenic nitrile. In the case of propargyl bromide 1,1-substitution may also occur, but the propargyl cyanide immediately isomerizes under the influence of the potassium cyanide. 

It was claimed that the Z-form of the allylic acetate 430 was retained in homoallylic ketone 431 obtained by reaction with the potassium enolate of 3-vinylcyclopentanone (429), after treatment with triethylborane[282]. Usually this is not possible. The reaction of a (Z)-allylic chloride with an alkenylaluminum reagent to give 1,4-dienes proceeds with retention of the stereochemistry to a considerable extent when it is carried out at -70 C[283]. 

Amino-A.-selenazoline and its 5-methyl derivative have previously been obtained by Baringer (61) starting from 2-bromoethylamine hydrobromide and l-amino-2-bromopropane hydrobromide, respectively, by reaction with potassium selenocyanate. 

Because tertiary alcohols are so readily converted to chlorides with hydrogen chlo nde thionyl chlonde is used mainly to prepare pnmary and secondary alkyl chlondes Reactions with thionyl chlonde are normally carried out m the presence of potassium carbonate or the weak organic base pyndme... 

---