Sulfur compounds, protection polymer

Antioxidant an-te- ak-so-dont, ian- tI- (1926) n. A substance that slows down the oxidation of oils, fats, etc., and thus helps to check deterioration antioxidants are added commercially to foods, soaps, etc. Although the term technically applies to molecules reacting with oxygen, it is often applied to molecules that protect from any free radical molecule with unpaired electrons. Chemistry encyclopedia, www. ChemistryAbout.com. A substance incorporated in a material to inhibit oxidation at normal or elevated temperatures. Antioxidants are used mainly with natural and synthetic rubbers, petroleum-based resins, and other such polymers that oxidize readily due to structural unsaturation. However, some thermoplastics, namely polypropylene, ABS, rubber-modified polystyrene, acrylic and vinyl resins, also require protection by antioxidants for some uses. There are two main classes (1) Those inhibit oxidation by reacting with chain-propagating radicals, such as hindered phenols that intercept free radicals. These are called primary antioxidants or free-radical scavengers. (2) Those decompose peroxide into non-radical and stable products examples are phosphates and various sulfur compounds, e.g., esters of thiodipropionic acid. These are referred... 

Ethene and propene are produced as bulk feedstocks for the chemical (polymer) industry and therefore their purities are important parameters. In particular, H2S and COS are compounds which may not only cause corrosion problems in processing equipment, but also may have detrimental effects on the catalysts in use. Eurthermore, air pollution regulations issued by, among others, the US Environmental Protection Agency (EPA) require that most of the sulfur gases should be removed in order to minimize Sulfur emissions into the atmosphere. Therefore, these compounds have to be determined to the ppb level. 

Since hydroperoxides play a determining role in the photooxidative degradation of polymers, decomposition of hydroperoxides into more stable compounds, before the hydroperoxides undergo photolytic cleavage, would be expected to provide an effective means of UV protection. Metal complexes of sulfur-containing compounds such as dialkyldithiocarbamates (XIX), dialkyldithiophosphates (XX) and thiobisphenolates (XXI) are very efficient hydroperoxide decomposers even if used in almost... 

Flame-retardant textiles are textiles or textile-based materials that inhibit or resist the spread of fire. Factors affecting flammability and thermal behavior of textile include fiber type, fabric construction, thermal behavior of textile polymer and its composition as well as the presence or absence of flame additives. On the other hand, flame-retardant additives can be classified by their chemical composition or by mode of action, i.e., gas phase action or by the formation of protective barrier [49, 50]. Moreover, flame-retardant functional finishes of cellulose-based textiles can be accomplished by [i] using inorganic phosphates, (ii) with organophosphorous compounds, [iii) with sulfur-derivatives or (iv) by grafting flame retardants monomers [49,50]. 

Antirad compounds decrease the rate of reactions including both crosslinking and chain scission. As a result they often provide protection against polymer degradation. Antirads include aromatic amines, quinones, aromatic sulfur and nitrogen compounds. These materials are highly... 

---