Subject technical

In the 13 case studies documented processes and experiences of attempts to substitute hazardous substances in the 1980s and 1990s were examined. The aim of the choice of cases was to cover a wide spectrum of substitution conditions consumer-close and consumer-remote products, product auxiliary materials and process auxiliary materials, SMEs and large-scale industiy, environment, consumer and occupational health and safety subjects, technical and organisational iimova-tions. 

Sniffing time of odors of urine, feces and mid-ventral gland secretion of conspecifics of own and opposite sex was examined in a two-stimulus test (Beauchamp, 1973 Johnston, 1981) the order of testing with different odors varied across subjects. There were at least 48 hours between two tests on the same subject. Technically, the procedure consisted of presentation of a pair of stimuli applied on cotton swabs that were placed in glass tubes (internal diameter 0.5 cm.) at a depth of 0.5 cm. from the open end. A pair of tubes, 4 cm apart, were inserted approximately 1 cm. into the cage through the wire lid. A new pair of glass tubes was used for each presentation. 

However, there is no Decision Machine available, either in the form of technical guides or handbooks, and experts are frequently compelled to take subjective technical decisions and to accept the related responsibility. In fact, the practical cases are always so specific that they cannot be covered by an all-embracing handbook. Moreover, even if such a tool existed, in case of judicial trial, the compliance with the handbook could frequently be considered only an extenuation of the possible guUt of the technical expert. Historical examples exist of technical specialists who have been sentenced in a case of a pressure vessel explosion, although in due course they had verified its compliance with the technical standards in force. In case of accident, in fact, the technical expert must demonstrate the application of all the means suggested by the status of the technical knowledge . Only completely new phenomena escape this criterion. 

The pressure equipment directive was adopted by the European Parliament and the European Council in May 1997. It harmonises the national laws of the 15 Member States of the European Union relating to equipment subject to the pressure risk. That directive is one of the series of technical harmonisation directives such as for machinery, medical devices, simple pressure vessels, gas appliances and so on, which were foreseen by the Communities programme for the elimination of technical barriers to trade. It therefore aims to ensure the free placing on the market and putting into service of the equipment concerned within the European Union and the European Economic Area. At the same time it permits a flexible regulatory environment, allowing European industry to develop new techniques increasing thereby its international competitiveness. 

CTB 941.2-93 defines laboratories subject to accreditation in National system. Among others laboratories with legal status, results of testing and measurements of which are used in assessment of safety of products, works and services, in diagnostics of technical state of critical safety objects and vehicles are noted. These laboratories use different NDT methods in their activities. 

The first scientific-technical publications on NDT issues appeared in Ukraine already at the end of the 40-ties in Automatic iTh/iii g journal, in the subject collections on technical diagnostics and non-destructive testing. 

The chief uses of chromatographic adsorption include (i) resolution of mixtures into their components (Li) purification of substances (including technical products from their contaminants) (iii) determination of the homogeneity of chemical substances (iv) comparison of substances suspected of being identical (v) concentration of materials from dilute solutions (e.g., from a natural source) (vi) quantita tive separation of one or more constituents from a complex mixture and (vii) identi-1 ig- II, 16, 3. gcajjQij and control of technical products. For further details, the student is referred to specialised works on the subject. ... 

J. Wittes and A. Turk, Correlation of Subjective—Objective Methods in the Study of Odors and Taste, American Society for Testing and Materials Special Technical Pubhcation 440, Philadelphia, Pa., 1968, pp. 49—70. 

Homogeneous GopolymeriZation. Nearly all acryhc fibers are made from acrylonitrile copolymers containing one or more additional monomers that modify the properties of the fiber. Thus copolymerization kinetics is a key technical area in the acryhc fiber industry. When carried out in a homogeneous solution, the copolymerization of acrylonitrile foUows the normal kinetic rate laws of copolymerization. Comprehensive treatments of this general subject have been pubhshed (35—39). The more specific subject of acrylonitrile copolymerization has been reviewed (40). The general subject of the reactivity of polymer radicals has been treated in depth (41). 

Standards have been a part of technology since building began, both at a scale that exceeded the capabiUties of an individual, and for a market other than the immediate family. Standardization minimizes disadvantageous diversity, assures acceptabiUty of products, and faciUtates technical communication. There are many attributes of materials that are subject to standardization, eg, composition, physical properties, dimensions, finish, and processing. Implicit to the realization of standards is the availabiUty of test methods and appropriate caUbration techniques. Apart from physical or artifactual standards, written or paper standards also must be considered, ie, their generation, promulgation, and interrelationships. 

Perhaps the most notable aspect of the history of the API operation is that it has been shaped at every step by those who use the system. Created by information speciaHsts within the petroleum iadustry, it has beea governed by a technical information committee made up of company representatives, and guided by a series of iadustry task forces, which have modified as aeeded the indexing thesaums, subject selectioa guideliaes, and selection rules for countries ia pateat coverage, journals, and other sources ia the aoapateatHterature. 

The FDA is headed by the Commissioner of Food and Dmgs. This position is not a Cabiaet-level office but falls within the PubHc Health Service (PHS), a division within the U.S. Department of Health and Human Services (HHS). The post of FDA Commissioner is subject to HHS pohtical clearance and Senate confirmation, and the Commissioner is ultimately accountable to HHS, Congress, and the President of the United States. The Commissioner has a staff to assist ia poHcy making and several deputy commissioners to oversee operation of ah. the subordinate units. FDA has six regional offices within the country, each responsible for a section of the country, and 21 district offices. Persons with technical background typicahy work ia one of FDA s chemistry laboratories or as investigators or consumer safety officers. 

Technical and trade organi2ations are concerned with safety and the environment. The Chlorine Institute in North America and Euro Chlor in Western Europe are examples of organi2ations dedicated to the safe production, transport, and use of chlorine. Ha2ard and operabiHty studies (HAZOP) reviews for new designs, plants, and expansions (135) have become required by poHcy in many operating companies. Papers on safety and environmental subjects are given at most technical meetings (136—138). 

In searching for data on a particular system, a computerized search of Chemical Ah.stract.s, Tngineering Index, and National Technical Information Service (NTIS) data bases should seriously be considered. Although the NTIS computer contains only information published after 1970, one normally can assume that most pre-1970 pubhcations of merit hkely will be referenced in the bibhographies of current articles on the subject. 

The foregoing discussion has been somewhat brief and more heuristic than technically complete. A review by Johnson and Tonks [39] on this subject should give the reader additional background and technical details. 

The basis for evaluation of piston speed varies throughout industry. This indicates that the subject is spiced with as much emotion as technical basics. An attempt to sort out the fundamentals will be made. First, because there are so many configurations and forms of the reciprocating compressor, it would appear logical that there is no one piston speed limit that will apply across the board to all machines. The manufacturer is at odds with the user because he would like to keep the speed up to keep the size of the compressor down, while the user would like to keep the speed down for reliability purposes. As is true for so many other cases, the referee is the economics. An obvious reason to limit the speed is maintenance... 

Elucidation of the phase relationships between the different forms of carbon is a difficult field of study because of the very high temperatures and pressures that must be applied. However, the subject is one of great technical importance because of the need to understand methods for transforming graphite and disordered forms of carbon into diamond. The diagram has been revised and reviewed at regular intervals [59-61] and a simplified form of the most recent diagram for carbon [62] is in Fig. 5. 

---