Materials structural

The AET was used at standard tests of numerous structural materials, above all steels and cast iron, prepared are ceramic samples. Part of tested samples had qjecial sur ce layer treatments by laser, plasma nitridation and similar. Effect of special surface treatment the authors published already earlier [5,6]. In this contribution are summed up typical courses of basic dependencies, measured by the AET at contact loading. 

The Institute has many-year experience of investigations and developments in the field of NDT. These are, mainly, developments which allowed creation of a series of eddy current flaw detectors for various applications. The Institute has traditionally studied the physico-mechanical properties of materials, their stressed-strained state, fracture mechanics and developed on this basis the procedures and instruments which measure the properties and predict the behaviour of materials. Quite important are also developments of technologies and equipment for control of thickness and adhesion of thin protective coatings on various bases, corrosion control of underground pipelines by indirect method, acoustic emission control of hydrogen and corrosion cracking in structural materials, etc. 

Beryllium is used as an alloying agent in producing beryllium copper, which is extensively used for springs, electrical contacts, spot-welding electrodes, and non-sparking tools. It is applied as a structural material for high-speed aircraft, missiles, spacecraft, and communication satellites. Other uses include windshield frame, brake discs, support beams, and other structural components of the space shuttle. 

Panasyuk V.V., Andreikiv A.V., Kovchik S.E. (1977) Methods of estimating the fracture toughness of structural materials. Kiev (in Russian). 

H. Hukimaka andj. P-em, Advanced Structural Materials, Elsevier, Amsterdam, the Netherlands, 1991, p. 45. 

Material characteristics, both chemical and physical, should be considered, especially flowabihty. Abrasiveness, friability, and lump size are also important. Chemical effects (e.g., the effect of oil on rubber or of acids on metal) may dictate the structural materials out of which conveyor components are fabricated. Moisture or oxidation effects from exposure to the atmosphere may be harmful to the material being conveyed and require total enclosure of the conveyor or even an artificial atmosphere. Obviously, certain types of conveyors lend themselves to such special requirements better than others. 

The effect of impurities in either structural material or corrosive material is so marked (while at the same time it may be either accelerating or decelerating) that for rehable results the actual materials which it is proposed to use should be tested and not types of these materials. In other words, it is much more desirable to test the actual plant solution and the actual metal or nonmetal than to rely upon a duphcation of either. Since as little as 0.01 percent of certain organic compounds will reduce the rate of solution of steel in sulfuric acid 99.5 percent and 0.05 percent bismuth in lead will increase the rate of corrosion over 1000 percent under certain conditions, it can be seen how difficult it would be to attempt to duplicate here all the significant constituents. 

Cast Irons Generally, cast iron is not a particularly strong or tough structural material, although it is one of the most economical ana is widely used industrially. 

Interna] Insulation The practice of insulating within the vessel (as opposed to applying insulating materials on the equipment exterior) is accomplished by the use of fiber blankets and hghtweight aggregates in ceramic cements. Such construction frequently incorporates a thin, high-alloy shroud (with slip joints to allow for thermal expansion) to protect the ceramic from erosion. In many cases this design is more economical than externally insulated equipment because it allows use of less expensive lower-alloy structural materials. 

Table 1.3 shows a rough breakdown of material prices. Materials for large-scale structural use - wood, cement and concrete, and structural steel - cost between UK 50 and UK 500 (US 75 and US 750) per tonne. There are many materials which have all the other properties required of a structural material - nickel or titanium, for example - but their use in this application is eliminated by their price. 

The listed properties lie, for most structural materials, in the range shown. 

No fewer than 14 pure metals have densities se4.5 Mg (see Table 10.1). Of these, titanium, aluminium and magnesium are in common use as structural materials. Beryllium is difficult to work and is toxic, but it is used in moderate quantities for heat shields and structural members in rockets. Lithium is used as an alloying element in aluminium to lower its density and save weight on airframes. Yttrium has an excellent set of properties and, although scarce, may eventually find applications in the nuclear-powered aircraft project. But the majority are unsuitable for structural use because they are chemically reactive or have low melting points." ... 

Proteins are usually separated into two distinct functional classes passive structural materials, which are built up from long fibers, and active components of cellular machinery in which the protein chains are arranged in small compact domains, as we have discussed in earlier chapters. In spite of their differences in structure and function, both these classes of proteins contain a helices and/or p sheets separated by regions of irregular structure. In most cases the fibrous proteins contain specific repetitive amino acid sequences that are necessary for their specific three-dimensional structure. 

Fibrous proteins can serve as structural materials for the same reason that other polymers do they are long-chain molecules. By cross-linking, interleaving and intertwining the proper combination of individual long-chain molecules, bulk properties are obtained that can serve many different functions. Fibrous proteins are usually divided in three different groups dependent on the secondary structure of the individual molecules coiled-coil a helices present in keratin and myosin, the triple helix in collagen, and P sheets in amyloid fibers and silks. 

Fibrous proteins are long-chain polymers that are used as structural materials. Most contain specific repetitive amino acid sequences and fall into one of three groups coiled-coil a helices as in keratin and myosin triple helices as in collagen and p sheets as in silk and amyloid fibrils. 

Polymers have come a long way from parkesine, celluloid and bakelite they have become functional as well as structural materials. Indeed, they have become both at the same time one novel use for polymers depends upon precision micro-embossing of polymers, with precise pressure and temperature control, for replicating electronic chips containing microchannels for capillary electrophoresis and for microfluidics devices or micro-optical components. 

McLean, M. (1996) in High-Temperature Structural Materials, eds. Cahn, R.W., Evans. 

Yamaguchi. M. (eds.) (1996) Symposium on Intermetallics as new high-temperature structural materials, Intermetallics 4, SI. 

---